Documentation: ACPI: Update references

Update references for the ACPI _DSD documentation. In particular:

- Substitute _DSD property and hierarchical data extension documents with
  the newer DSD guide that replaces both, and use its HTML form.

- Refer to the latest ACPI spec.

- Add data node reference documentation reference to graph documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation/firmware-guide/acpi/dsd/data-node-references.rst

@@ -13,9 +13,9 @@ Hierarchical data extension nodes may not be referred to directly, hence this
 document defines a scheme to implement such references.
 
 A reference consist of the device object name followed by one or more
-hierarchical data extension [1] keys. Specifically, the hierarchical data
-extension node which is referred to by the key shall lie directly under the
-parent object i.e. either the device object or another hierarchical data
+hierarchical data extension [dsd-guide] keys. Specifically, the hierarchical
+data extension node which is referred to by the key shall lie directly under
+the parent object i.e. either the device object or another hierarchical data
 extension node.
 
 The keys in the hierarchical data nodes shall consist of the name of the node,
@@ -33,7 +33,7 @@ extension key.
 Example
 =======
 
-In the ASL snippet below, the "reference" _DSD property [2] contains a
+In the ASL snippet below, the "reference" _DSD property contains a
 device object reference to DEV0 and under that device object, a
 hierarchical data extension key "node@1" referring to the NOD1 object
 and lastly, a hierarchical data extension key "anothernode" referring to
@@ -91,10 +91,6 @@ Documentation/firmware-guide/acpi/dsd/graph.rst.
 References
 ==========
 
-[1] Hierarchical Data Extension UUID For _DSD.
-<https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>,
-referenced 2018-07-17.
-
-[2] Device Properties UUID For _DSD.
-<https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>,
-referenced 2016-10-04.
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.

Documentation/firmware-guide/acpi/dsd/graph.rst

@@ -7,11 +7,11 @@ Graphs
 _DSD
 ====
 
-_DSD (Device Specific Data) [7] is a predefined ACPI device
+_DSD (Device Specific Data) [dsd-guide] is a predefined ACPI device
 configuration object that can be used to convey information on
 hardware features which are not specifically covered by the ACPI
-specification [1][6]. There are two _DSD extensions that are relevant
-for graphs: property [4] and hierarchical data extensions [5]. The
+specification [acpi]. There are two _DSD extensions that are relevant
+for graphs: property [dsd-guide] and hierarchical data extensions. The
 property extension provides generic key-value pairs whereas the
 hierarchical data extension supports nodes with references to other
 nodes, forming a tree. The nodes in the tree may contain properties as
@@ -36,8 +36,9 @@ Ports and endpoints
 ===================
 
 The port and endpoint concepts are very similar to those in Devicetree
-[3]. A port represents an interface in a device, and an endpoint
-represents a connection to that interface.
+[devicetree, graph-bindings]. A port represents an interface in a device, and
+an endpoint represents a connection to that interface. Also see [data-node-ref]
+for generic data node references.
 
 All port nodes are located under the device's "_DSD" node in the hierarchical
 data extension tree. The data extension related to each port node must begin
@@ -153,25 +154,20 @@ the "ISP" device and vice versa.
 References
 ==========
 
-[1] _DSD (Device Specific Data) Implementation Guide.
-    https://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm,
-    referenced 2016-10-03.
+[acpi] Advanced Configuration and Power Interface Specification.
+    https://uefi.org/specifications/ACPI/6.4/, referenced 2021-11-30.
 
-[2] Devicetree. https://www.devicetree.org, referenced 2016-10-03.
+[data-node-ref] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
 
-[3] Documentation/devicetree/bindings/graph.txt
+[devicetree] Devicetree. https://www.devicetree.org, referenced 2016-10-03.
 
-[4] Device Properties UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
-    referenced 2016-10-04.
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.
 
-[5] Hierarchical Data Extension UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf,
-    referenced 2016-10-04.
-
-[6] Advanced Configuration and Power Interface Specification.
-    https://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf,
-    referenced 2016-10-04.
-
-[7] _DSD Device Properties Usage Rules.
+[dsd-rules] _DSD Device Properties Usage Rules.
     Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[graph-bindings] Common bindings for device graphs (Devicetree).
+    https://github.com/devicetree-org/dt-schema/blob/main/schemas/graph.yaml,
+    referenced 2021-11-30.

Documentation/firmware-guide/acpi/dsd/leds.rst

@@ -5,19 +5,20 @@
 Describing and referring to LEDs in ACPI
 ========================================
 
-Individual LEDs are described by hierarchical data extension [6] nodes under the
+Individual LEDs are described by hierarchical data extension [5] nodes under the
 device node, the LED driver chip. The "reg" property in the LED specific nodes
 tells the numerical ID of each individual LED output to which the LEDs are
-connected. [3] The hierarchical data nodes are named "led@X", where X is the
+connected. [leds] The hierarchical data nodes are named "led@X", where X is the
 number of the LED output.
 
-Referring to LEDs in Device tree is documented in [4], in "flash-leds" property
-documentation. In short, LEDs are directly referred to by using phandles.
+Referring to LEDs in Device tree is documented in [video-interfaces], in
+"flash-leds" property documentation. In short, LEDs are directly referred to by
+using phandles.
 
-While Device tree allows referring to any node in the tree[1], in ACPI
-references are limited to device nodes only [2]. For this reason using the same
-mechanism on ACPI is not possible. A mechanism to refer to non-device ACPI nodes
-is documented in [7].
+While Device tree allows referring to any node in the tree [devicetree], in
+ACPI references are limited to device nodes only [acpi]. For this reason using
+the same mechanism on ACPI is not possible. A mechanism to refer to non-device
+ACPI nodes is documented in [data-node-ref].
 
 ACPI allows (as does DT) using integer arguments after the reference. A
 combination of the LED driver device reference and an integer argument,
@@ -90,22 +91,17 @@ where
 References
 ==========
 
-[1] Device tree. https://www.devicetree.org, referenced 2019-02-21.
+[acpi] Advanced Configuration and Power Interface Specification.
+    https://uefi.org/specifications/ACPI/6.4/, referenced 2021-11-30.
 
-[2] Advanced Configuration and Power Interface Specification.
-    https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf,
-    referenced 2019-02-21.
+[data-node-ref] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
 
-[3] Documentation/devicetree/bindings/leds/common.txt
+[devicetree] Devicetree. https://www.devicetree.org, referenced 2019-02-21.
 
-[4] Documentation/devicetree/bindings/media/video-interfaces.txt
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.
 
-[5] Device Properties UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
-    referenced 2019-02-21.
+[leds] Documentation/devicetree/bindings/leds/common.yaml
 
-[6] Hierarchical Data Extension UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf,
-    referenced 2019-02-21.
-
-[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+[video-interfaces] Documentation/devicetree/bindings/media/video-interfaces.yaml

Documentation/firmware-guide/acpi/dsd/phy.rst

@@ -4,17 +4,17 @@
 MDIO bus and PHYs in ACPI
 =========================
 
-The PHYs on an MDIO bus [1] are probed and registered using
+The PHYs on an MDIO bus [phy] are probed and registered using
 fwnode_mdiobus_register_phy().
 
 Later, for connecting these PHYs to their respective MACs, the PHYs registered
 on the MDIO bus have to be referenced.
 
 This document introduces two _DSD properties that are to be used
-for connecting PHYs on the MDIO bus [3] to the MAC layer.
+for connecting PHYs on the MDIO bus [dsd-properties-rules] to the MAC layer.
 
 These properties are defined in accordance with the "Device
-Properties UUID For _DSD" [2] document and the
+Properties UUID For _DSD" [dsd-guide] document and the
 daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
 Data Descriptors containing them.
 
@@ -48,22 +48,22 @@ as device object references (e.g. \_SB.MDI0.PHY1).
 phy-mode
 --------
 The "phy-mode" _DSD property is used to describe the connection to
-the PHY. The valid values for "phy-mode" are defined in [4].
+the PHY. The valid values for "phy-mode" are defined in [ethernet-controller].
 
 managed
 -------
 Optional property, which specifies the PHY management type.
-The valid values for "managed" are defined in [4].
+The valid values for "managed" are defined in [ethernet-controller].
 
 fixed-link
 ----------
 The "fixed-link" is described by a data-only subnode of the
 MAC port, which is linked in the _DSD package via
 hierarchical data extension (UUID dbb8e3e6-5886-4ba6-8795-1319f52a966b
-in accordance with [5] "_DSD Implementation Guide" document).
+in accordance with [dsd-guide] "_DSD Implementation Guide" document).
 The subnode should comprise a required property ("speed") and
 possibly the optional ones - complete list of parameters and
-their values are specified in [4].
+their values are specified in [ethernet-controller].
 
 The following ASL example illustrates the usage of these properties.
 
@@ -188,12 +188,14 @@ MAC node example with a "fixed-link" subnode.
 References
 ==========
 
-[1] Documentation/networking/phy.rst
+[phy] Documentation/networking/phy.rst
 
-[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+[dsd-properties-rules]
+    Documentation/firmware-guide/acpi/DSD-properties-rules.rst
 
-[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+[ethernet-controller]
+    Documentation/devicetree/bindings/net/ethernet-controller.yaml
 
-[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml
-
-[5] https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.pdf
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.