Commit 5a0722b8 authored by Timur Tabi's avatar Timur Tabi Committed by Greg Kroah-Hartman

tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44

Define a new early console name for Qualcomm Datacenter Technologies
QDF2400 SOCs affected by erratum 44, instead of piggy-backing on "pl011".
Previously, to enable traditional (non-SPCR) earlycon, the documentation
said to specify "earlycon=pl011,<address>,qdf2400_e44", but the code was
broken and this didn't actually work.

So instead, the method for specifying the E44 work-around with traditional
earlycon is "earlycon=qdf2400_e44,<address>".  Both methods of earlycon
are now enabled with the same function.

Fixes: e53e597f ("tty: pl011: fix earlycon work-around for QDF2400 erratum 44")
Signed-off-by: default avatarTimur Tabi <timur@codeaurora.org>
Cc: stable <stable@vger.kernel.org> # 4.11
Tested-by: default avatarShanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 15a06548
......@@ -2475,19 +2475,34 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
if (!device->port.membase)
return -ENODEV;
/* On QDF2400 SOCs affected by Erratum 44, the "qdf2400_e44" must
* also be specified, e.g. "earlycon=pl011,<address>,qdf2400_e44".
*/
if (!strcmp(device->options, "qdf2400_e44"))
device->con->write = qdf2400_e44_early_write;
else
device->con->write = pl011_early_write;
device->con->write = pl011_early_write;
return 0;
}
OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
EARLYCON_DECLARE(qdf2400_e44, pl011_early_console_setup);
/*
* On Qualcomm Datacenter Technologies QDF2400 SOCs affected by
* Erratum 44, traditional earlycon can be enabled by specifying
* "earlycon=qdf2400_e44,<address>". Any options are ignored.
*
* Alternatively, you can just specify "earlycon", and the early console
* will be enabled with the information from the SPCR table. In this
* case, the SPCR code will detect the need for the E44 work-around,
* and set the console name to "qdf2400_e44".
*/
static int __init
qdf2400_e44_early_console_setup(struct earlycon_device *device,
const char *opt)
{
if (!device->port.membase)
return -ENODEV;
device->con->write = qdf2400_e44_early_write;
return 0;
}
EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup);
#else
#define AMBA_CONSOLE NULL
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment