Skip to content

L
linux
Commit 5a09ae9f authored by Jani Nikula's avatar Jani Nikula Committed by Daniel Vetter
Browse files
Options

drm/i915: refactor VLV IOSF sideband accessors to use one helper 

Both the intel_dpio_{read,write} and valleyview_{punit,nc}_{read,write}
use the IOSF sideband interface. They access the same registers and do
mostly the same stuff, but no shared code. There are even duplicate
register defines for the same registers. Both have locking, but the
former use dpio_lock and the latter rps.hw_lock. It's racy.

This patch refactors the sideband access to a single function that
expects dpio_lock to be held. The dpio_lock is only used for sideband
stuff, so it's a better match than rps.hw_lock for the purpose. The rps
stuff still needs rps.hw_lock, since it's used to protect more than just
the register access, so rps code will need to hold both locks.

Based on the work by Shobhit Kumar <shobhit.kumar@intel.com> and Yogesh
Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>.
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Acked-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 59de0813
Hide whitespace changes
Inline Side-by-side
Showing with 93 additions and 102 deletions
drivers/gpu/drm/i915/i915_reg.h
View file @ 5a09ae9f
......@@ -342,27 +342,54 @@
#define DEBUG_RESET_DISPLAY (1<<9)
/*
* DPIO - a special bus for various display related registers to hide behind:
* 0x800c: m1, m2, n, p1, p2, k dividers
* 0x8014: REF and SFR select
* 0x8014: N divider, VCO select
* 0x801c/3c: core clock bits
* 0x8048/68: low pass filter coefficients
* 0x8100: fast clock controls
* IOSF sideband
*/
#define VLV_IOSF_DOORBELL_REQ (VLV_DISPLAY_BASE + 0x2100)
#define IOSF_DEVFN_SHIFT 24
#define IOSF_OPCODE_SHIFT 16
#define IOSF_PORT_SHIFT 8
#define IOSF_BYTE_ENABLES_SHIFT 4
#define IOSF_BAR_SHIFT 1
#define IOSF_SB_BUSY (1<<0)
#define IOSF_PORT_PUNIT 0x4
#define IOSF_PORT_NC 0x11
#define IOSF_PORT_DPIO 0x12
#define VLV_IOSF_DATA (VLV_DISPLAY_BASE + 0x2104)
#define VLV_IOSF_ADDR (VLV_DISPLAY_BASE + 0x2108)
#define PUNIT_OPCODE_REG_READ 6
#define PUNIT_OPCODE_REG_WRITE 7
#define PUNIT_REG_GPU_LFM 0xd3
#define PUNIT_REG_GPU_FREQ_REQ 0xd4
#define PUNIT_REG_GPU_FREQ_STS 0xd8
#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc
#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */
#define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */
#define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c
#define FB_GFX_MAX_FREQ_FUSE_SHIFT 3
#define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8
#define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11
#define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800
#define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34
#define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007
#define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30
#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27
#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
/*
* DPIO - a special bus for various display related registers to hide behind
*
* DPIO is VLV only.
*
* Note: digital port B is DDI0, digital pot C is DDI1
*/
#define DPIO_PKT (VLV_DISPLAY_BASE + 0x2100)
#define DPIO_RID (0<<24)
#define DPIO_OP_WRITE (1<<16)
#define DPIO_OP_READ (0<<16)
#define DPIO_PORTID (0x12<<8)
#define DPIO_BYTE (0xf<<4)
#define DPIO_BUSY (1<<0) /* status only */
#define DPIO_DATA (VLV_DISPLAY_BASE + 0x2104)
#define DPIO_REG (VLV_DISPLAY_BASE + 0x2108)
#define DPIO_DEVFN 0
#define DPIO_OPCODE_REG_WRITE 1
#define DPIO_OPCODE_REG_READ 0
#define DPIO_CTL (VLV_DISPLAY_BASE + 0x2110)
#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */
#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */
......@@ -4541,40 +4568,6 @@
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
#define VLV_IOSF_DOORBELL_REQ 0x182100
#define IOSF_DEVFN_SHIFT 24
#define IOSF_OPCODE_SHIFT 16
#define IOSF_PORT_SHIFT 8
#define IOSF_BYTE_ENABLES_SHIFT 4
#define IOSF_BAR_SHIFT 1
#define IOSF_SB_BUSY (1<<0)
#define IOSF_PORT_PUNIT 0x4
#define IOSF_PORT_NC 0x11
#define VLV_IOSF_DATA 0x182104
#define VLV_IOSF_ADDR 0x182108
#define PUNIT_OPCODE_REG_READ 6
#define PUNIT_OPCODE_REG_WRITE 7
#define PUNIT_REG_GPU_LFM 0xd3
#define PUNIT_REG_GPU_FREQ_REQ 0xd4
#define PUNIT_REG_GPU_FREQ_STS 0xd8
#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc
#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */
#define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */
#define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c
#define FB_GFX_MAX_FREQ_FUSE_SHIFT 3
#define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8
#define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11
#define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800
#define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34
#define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007
#define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30
#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27
#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
#define GEN6_GT_CORE_STATUS 0x138060
#define GEN6_CORE_CPD_STATE_MASK (7<<4)
#define GEN6_RCn_MASK 7
......
drivers/gpu/drm/i915/intel_sideband.c
View file @ 5a09ae9f
......@@ -26,42 +26,37 @@
#include "intel_drv.h"
/* IOSF sideband */
static int vlv_punit_rw(struct drm_i915_private *dev_priv, u32 port, u8 opcode,
u8 addr, u32 *val)
static int vlv_sideband_rw(struct drm_i915_private *dev_priv, u32 devfn,
u32 port, u32 opcode, u32 addr, u32 *val)
{
u32 cmd, devfn, be, bar;
bar = 0;
be = 0xf;
devfn = PCI_DEVFN(2, 0);
u32 cmd, be = 0xf, bar = 0;
bool is_read = (opcode == PUNIT_OPCODE_REG_READ ||
opcode == DPIO_OPCODE_REG_READ);
cmd = (devfn << IOSF_DEVFN_SHIFT) | (opcode << IOSF_OPCODE_SHIFT) |
(port << IOSF_PORT_SHIFT) | (be << IOSF_BYTE_ENABLES_SHIFT) |
(bar << IOSF_BAR_SHIFT);
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
if (I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) {
DRM_DEBUG_DRIVER("warning: pcode (%s) mailbox access failed\n",
opcode == PUNIT_OPCODE_REG_READ ?
"read" : "write");
if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0, 5)) {
DRM_DEBUG_DRIVER("IOSF sideband idle wait (%s) timed out\n",
is_read ? "read" : "write");
return -EAGAIN;
}
I915_WRITE(VLV_IOSF_ADDR, addr);
if (opcode == PUNIT_OPCODE_REG_WRITE)
if (!is_read)
I915_WRITE(VLV_IOSF_DATA, *val);
I915_WRITE(VLV_IOSF_DOORBELL_REQ, cmd);
if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0,
5)) {
DRM_ERROR("timeout waiting for pcode %s (%d) to finish\n",
opcode == PUNIT_OPCODE_REG_READ ? "read" : "write",
addr);
if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0, 5)) {
DRM_DEBUG_DRIVER("IOSF sideband finish wait (%s) timed out\n",
is_read ? "read" : "write");
return -ETIMEDOUT;
}
if (opcode == PUNIT_OPCODE_REG_READ)
if (is_read)
*val = I915_READ(VLV_IOSF_DATA);
I915_WRITE(VLV_IOSF_DATA, 0);
......@@ -70,57 +65,60 @@ static int vlv_punit_rw(struct drm_i915_private *dev_priv, u32 port, u8 opcode,
int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
{
return vlv_punit_rw(dev_priv, IOSF_PORT_PUNIT, PUNIT_OPCODE_REG_READ,
addr, val);
int ret;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
mutex_lock(&dev_priv->dpio_lock);
ret = vlv_sideband_rw(dev_priv, PCI_DEVFN(2, 0), IOSF_PORT_PUNIT,
PUNIT_OPCODE_REG_READ, addr, val);
mutex_unlock(&dev_priv->dpio_lock);
return ret;
}
int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val)
{
return vlv_punit_rw(dev_priv, IOSF_PORT_PUNIT, PUNIT_OPCODE_REG_WRITE,
addr, &val);
int ret;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
mutex_lock(&dev_priv->dpio_lock);
ret = vlv_sideband_rw(dev_priv, PCI_DEVFN(2, 0), IOSF_PORT_PUNIT,
PUNIT_OPCODE_REG_WRITE, addr, &val);
mutex_unlock(&dev_priv->dpio_lock);
return ret;
}
int valleyview_nc_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
{
return vlv_punit_rw(dev_priv, IOSF_PORT_NC, PUNIT_OPCODE_REG_READ,
addr, val);
int ret;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
mutex_lock(&dev_priv->dpio_lock);
ret = vlv_sideband_rw(dev_priv, PCI_DEVFN(2, 0), IOSF_PORT_NC,
PUNIT_OPCODE_REG_READ, addr, val);
mutex_unlock(&dev_priv->dpio_lock);
return ret;
}
u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
{
WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
u32 val = 0;
if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
DRM_ERROR("DPIO idle wait timed out\n");
return 0;
}
vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_DPIO,
DPIO_OPCODE_REG_READ, reg, &val);
I915_WRITE(DPIO_REG, reg);
I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
DPIO_BYTE);
if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
DRM_ERROR("DPIO read wait timed out\n");
return 0;
}
return I915_READ(DPIO_DATA);
return val;
}
void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, u32 val)
{
WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
DRM_ERROR("DPIO idle wait timed out\n");
return;
}
I915_WRITE(DPIO_DATA, val);
I915_WRITE(DPIO_REG, reg);
I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
DPIO_BYTE);
if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
DRM_ERROR("DPIO write wait timed out\n");
vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_DPIO,
DPIO_OPCODE_REG_WRITE, reg, &val);
}
/* SBI access */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7