Merge tag 'i2c-for-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A set of I2C driver fixes. Mostly fixing resource leaks or sanity
  checks"

* tag 'i2c-for-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xiic: Correct return value check for xiic_reinit()
  i2c: mux: gpio: Add missing fwnode_handle_put()
  i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
  i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  i2c: i801: unregister tco_pdev in i801_probe() error path

drivers/i2c/busses/i2c-designware-common.c

@@ -441,8 +441,25 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
 
 void __i2c_dw_disable(struct dw_i2c_dev *dev)
 {
+	unsigned int raw_intr_stats;
+	unsigned int enable;
 	int timeout = 100;
+	bool abort_needed;
 	unsigned int status;
+	int ret;
+
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_intr_stats);
+	regmap_read(dev->map, DW_IC_ENABLE, &enable);
+
+	abort_needed = raw_intr_stats & DW_IC_INTR_MST_ON_HOLD;
+	if (abort_needed) {
+		regmap_write(dev->map, DW_IC_ENABLE, enable | DW_IC_ENABLE_ABORT);
+		ret = regmap_read_poll_timeout(dev->map, DW_IC_ENABLE, enable,
+					       !(enable & DW_IC_ENABLE_ABORT), 10,
+					       100);
+		if (ret)
+			dev_err(dev->dev, "timeout while trying to abort current transfer\n");
+	}
 
 	do {
 		__i2c_dw_disable_nowait(dev);

drivers/i2c/busses/i2c-designware-core.h

@@ -98,6 +98,7 @@
 #define DW_IC_INTR_START_DET			BIT(10)
 #define DW_IC_INTR_GEN_CALL			BIT(11)
 #define DW_IC_INTR_RESTART_DET			BIT(12)
+#define DW_IC_INTR_MST_ON_HOLD			BIT(13)
 
 #define DW_IC_INTR_DEFAULT_MASK			(DW_IC_INTR_RX_FULL | \
 						 DW_IC_INTR_TX_ABRT | \
@@ -108,6 +109,8 @@
 						 DW_IC_INTR_RX_UNDER | \
 						 DW_IC_INTR_RD_REQ)
 
+#define DW_IC_ENABLE_ABORT			BIT(1)
+
 #define DW_IC_STATUS_ACTIVITY			BIT(0)
 #define DW_IC_STATUS_TFE			BIT(2)
 #define DW_IC_STATUS_RFNE			BIT(3)

drivers/i2c/busses/i2c-i801.c

@@ -1754,6 +1754,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		"SMBus I801 adapter at %04lx", priv->smba);
 	err = i2c_add_adapter(&priv->adapter);
 	if (err) {
+		platform_device_unregister(priv->tco_pdev);
 		i801_acpi_remove(priv);
 		return err;
 	}

drivers/i2c/busses/i2c-xiic.c

@@ -710,7 +710,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 		 * reset the IP instead of just flush fifos
 		 */
 		ret = xiic_reinit(i2c);
-		if (!ret)
+		if (ret < 0)
 			dev_dbg(i2c->adap.dev.parent, "reinit failed\n");
 
 		if (i2c->rx_msg) {

drivers/i2c/muxes/i2c-demux-pinctrl.c

@@ -243,6 +243,10 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 		props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL);
 		props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL);
+		if (!props[i].name || !props[i].value) {
+			err = -ENOMEM;
+			goto err_rollback;
+		}
 		props[i].length = 3;
 
 		of_changeset_init(&priv->chan[i].chgset);

drivers/i2c/muxes/i2c-mux-gpio.c

@@ -105,8 +105,10 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
 
 		} else if (is_acpi_node(child)) {
 			rc = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), values + i);
-			if (rc)
+			if (rc) {
+				fwnode_handle_put(child);
 				return dev_err_probe(dev, rc, "Cannot get address\n");
+			}
 		}
 
 		i++;