Commit 5a9d19ab authored by David S. Miller's avatar David S. Miller

Merge branch 'ndo_set_config'

Florian Fainelli says:

====================
net: ndo_set_config/ifmap cleanups

This patch series removes a bunch of useless ndo_set_config in non
PCMCIA Ethernet drivers.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 5b54dac8 2d7f2f90
...@@ -769,11 +769,6 @@ static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ...@@ -769,11 +769,6 @@ static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return phy_mii_ioctl(phy, ifr, cmd); return phy_mii_ioctl(phy, ifr, cmd);
} }
static int ethoc_config(struct net_device *dev, struct ifmap *map)
{
return -ENOSYS;
}
static void ethoc_do_set_mac_address(struct net_device *dev) static void ethoc_do_set_mac_address(struct net_device *dev)
{ {
struct ethoc *priv = netdev_priv(dev); struct ethoc *priv = netdev_priv(dev);
...@@ -995,7 +990,6 @@ static const struct net_device_ops ethoc_netdev_ops = { ...@@ -995,7 +990,6 @@ static const struct net_device_ops ethoc_netdev_ops = {
.ndo_open = ethoc_open, .ndo_open = ethoc_open,
.ndo_stop = ethoc_stop, .ndo_stop = ethoc_stop,
.ndo_do_ioctl = ethoc_ioctl, .ndo_do_ioctl = ethoc_ioctl,
.ndo_set_config = ethoc_config,
.ndo_set_mac_address = ethoc_set_mac_address, .ndo_set_mac_address = ethoc_set_mac_address,
.ndo_set_rx_mode = ethoc_set_multicast_list, .ndo_set_rx_mode = ethoc_set_multicast_list,
.ndo_change_mtu = ethoc_change_mtu, .ndo_change_mtu = ethoc_change_mtu,
......
...@@ -1909,40 +1909,6 @@ static void sxgbe_set_rx_mode(struct net_device *dev) ...@@ -1909,40 +1909,6 @@ static void sxgbe_set_rx_mode(struct net_device *dev)
readl(ioaddr + SXGBE_HASH_LOW)); readl(ioaddr + SXGBE_HASH_LOW));
} }
/**
* sxgbe_config - entry point for changing configuration mode passed on by
* ifconfig
* @dev : pointer to the device structure
* @map : pointer to the device mapping structure
* Description:
* This function is a driver entry point which gets called by the kernel
* whenever some device configuration is changed.
* Return value:
* This function returns 0 if success and appropriate error otherwise.
*/
static int sxgbe_config(struct net_device *dev, struct ifmap *map)
{
struct sxgbe_priv_data *priv = netdev_priv(dev);
/* Can't act on a running interface */
if (dev->flags & IFF_UP)
return -EBUSY;
/* Don't allow changing the I/O address */
if (map->base_addr != (unsigned long)priv->ioaddr) {
netdev_warn(dev, "can't change I/O address\n");
return -EOPNOTSUPP;
}
/* Don't allow changing the IRQ */
if (map->irq != priv->irq) {
netdev_warn(dev, "not change IRQ number %d\n", priv->irq);
return -EOPNOTSUPP;
}
return 0;
}
#ifdef CONFIG_NET_POLL_CONTROLLER #ifdef CONFIG_NET_POLL_CONTROLLER
/** /**
* sxgbe_poll_controller - entry point for polling receive by device * sxgbe_poll_controller - entry point for polling receive by device
...@@ -2004,7 +1970,6 @@ static const struct net_device_ops sxgbe_netdev_ops = { ...@@ -2004,7 +1970,6 @@ static const struct net_device_ops sxgbe_netdev_ops = {
.ndo_set_rx_mode = sxgbe_set_rx_mode, .ndo_set_rx_mode = sxgbe_set_rx_mode,
.ndo_tx_timeout = sxgbe_tx_timeout, .ndo_tx_timeout = sxgbe_tx_timeout,
.ndo_do_ioctl = sxgbe_ioctl, .ndo_do_ioctl = sxgbe_ioctl,
.ndo_set_config = sxgbe_config,
#ifdef CONFIG_NET_POLL_CONTROLLER #ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = sxgbe_poll_controller, .ndo_poll_controller = sxgbe_poll_controller,
#endif #endif
......
...@@ -2214,27 +2214,6 @@ static void stmmac_tx_timeout(struct net_device *dev) ...@@ -2214,27 +2214,6 @@ static void stmmac_tx_timeout(struct net_device *dev)
stmmac_tx_err(priv); stmmac_tx_err(priv);
} }
/* Configuration changes (passed on by ifconfig) */
static int stmmac_config(struct net_device *dev, struct ifmap *map)
{
if (dev->flags & IFF_UP) /* can't act on a running interface */
return -EBUSY;
/* Don't allow changing the I/O address */
if (map->base_addr != dev->base_addr) {
pr_warn("%s: can't change I/O address\n", dev->name);
return -EOPNOTSUPP;
}
/* Don't allow changing the IRQ */
if (map->irq != dev->irq) {
pr_warn("%s: not change IRQ number %d\n", dev->name, dev->irq);
return -EOPNOTSUPP;
}
return 0;
}
/** /**
* stmmac_set_rx_mode - entry point for multicast addressing * stmmac_set_rx_mode - entry point for multicast addressing
* @dev : pointer to the device structure * @dev : pointer to the device structure
...@@ -2600,7 +2579,6 @@ static const struct net_device_ops stmmac_netdev_ops = { ...@@ -2600,7 +2579,6 @@ static const struct net_device_ops stmmac_netdev_ops = {
.ndo_set_rx_mode = stmmac_set_rx_mode, .ndo_set_rx_mode = stmmac_set_rx_mode,
.ndo_tx_timeout = stmmac_tx_timeout, .ndo_tx_timeout = stmmac_tx_timeout,
.ndo_do_ioctl = stmmac_ioctl, .ndo_do_ioctl = stmmac_ioctl,
.ndo_set_config = stmmac_config,
#ifdef CONFIG_NET_POLL_CONTROLLER #ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = stmmac_poll_controller, .ndo_poll_controller = stmmac_poll_controller,
#endif #endif
......
...@@ -313,19 +313,6 @@ static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, }; ...@@ -313,19 +313,6 @@ static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, };
static struct mii_bus *cpmac_mii; static struct mii_bus *cpmac_mii;
static int cpmac_config(struct net_device *dev, struct ifmap *map)
{
if (dev->flags & IFF_UP)
return -EBUSY;
/* Don't allow changing the I/O address */
if (map->base_addr != dev->base_addr)
return -EOPNOTSUPP;
/* ignore other fields */
return 0;
}
static void cpmac_set_multicast_list(struct net_device *dev) static void cpmac_set_multicast_list(struct net_device *dev)
{ {
struct netdev_hw_addr *ha; struct netdev_hw_addr *ha;
...@@ -1100,7 +1087,6 @@ static const struct net_device_ops cpmac_netdev_ops = { ...@@ -1100,7 +1087,6 @@ static const struct net_device_ops cpmac_netdev_ops = {
.ndo_tx_timeout = cpmac_tx_timeout, .ndo_tx_timeout = cpmac_tx_timeout,
.ndo_set_rx_mode = cpmac_set_multicast_list, .ndo_set_rx_mode = cpmac_set_multicast_list,
.ndo_do_ioctl = cpmac_ioctl, .ndo_do_ioctl = cpmac_ioctl,
.ndo_set_config = cpmac_config,
.ndo_change_mtu = eth_change_mtu, .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr, .ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr, .ndo_set_mac_address = eth_mac_addr,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment