Commit 5b39be46 authored by Ben Dooks's avatar Ben Dooks

ARM: Add common entry code for system with two VICs

Add a common entry-macro-vic2.S for systems where there are two VICs
so that the machine or platform directories just need to setup the
correct information before including <asm/entry-macro-vic2.S> into
their own entry-macro.S file.

Since this code is from the S3C64XX project, we update the S3C64XX
machine entry code to use this new header.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 51022cf6
/* arch/arm/include/asm/entry-macro-vic2.S
*
* Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Low-level IRQ helper macros for a device with two VICs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/* This should be included from <mach/entry-macro.S> with the necessary
* defines for virtual addresses and IRQ bases for the two vics.
*
* The code needs the following defined:
* IRQ_VIC0_BASE IRQ number of VIC0's first IRQ
* IRQ_VIC1_BASE IRQ number of VIC1's first IRQ
* VA_VIC0 Virtual address of VIC0
* VA_VIC1 Virtual address of VIC1
*
* Note, code assumes VIC0's virtual address is an ARM immediate constant
* away from VIC1.
*/
#include <asm/hardware/vic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check the vic0
mov \irqnr, #IRQ_VIC0_BASE + 31
ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
teq \irqstat, #0
@ otherwise try vic1
addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
......@@ -12,33 +12,7 @@
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/vic.h>
#include <mach/map.h>
#include <plat/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =S3C_VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check the vic0
mov \irqnr, # S3C_IRQ_OFFSET + 31
ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
teq \irqstat, #0
@ otherwise try vic1
addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
#include <asm/entry-macro-vic2.S>
......@@ -70,8 +70,8 @@
#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
#define VA_VIC0 (S3C_VA_IRQ + 0x00)
#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
......
......@@ -20,7 +20,7 @@
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
}
......
......@@ -78,12 +78,12 @@ static struct map_desc s3c_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_VIC0,
.virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_VIC1,
.virtual = (unsigned long)VA_VIC1,
.pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
......
......@@ -24,8 +24,8 @@
#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
#define S3C_VIC0_BASE S3C_IRQ(0)
#define S3C_VIC1_BASE S3C_IRQ(32)
#define IRQ_VIC0_BASE S3C_IRQ(0)
#define IRQ_VIC1_BASE S3C_IRQ(32)
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
......@@ -59,8 +59,8 @@
/* VIC based IRQs */
#define S3C64XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
#define S3C64XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
/* VIC0 */
......
......@@ -54,8 +54,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
/* add the timer sub-irqs */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment