Commit 5b3c87fd authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Jonathan Cameron

iio: imu: st_lsm6dsx: add addr/max_word_len to st_lsm6dsx_read_block()

Add reg addr and max_word_len parameters to st_lsm6dsx_read_block
since LSM6DSO will use a different register address to read samples
from the FIFO and a different sample len
Signed-off-by: default avatarLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 54a6d0c6
......@@ -254,18 +254,18 @@ static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
* Set max bulk read to ST_LSM6DSX_MAX_WORD_LEN in order to avoid
* a kmalloc for each bus access
*/
static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 *data,
unsigned int data_len)
static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
u8 *data, unsigned int data_len,
unsigned int max_word_len)
{
unsigned int word_len, read_len = 0;
int err;
while (read_len < data_len) {
word_len = min_t(unsigned int, data_len - read_len,
ST_LSM6DSX_MAX_WORD_LEN);
err = regmap_bulk_read(hw->regmap,
ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
data + read_len, word_len);
max_word_len);
err = regmap_bulk_read(hw->regmap, addr, data + read_len,
word_len);
if (err < 0)
return err;
read_len += word_len;
......@@ -315,7 +315,9 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
err = st_lsm6dsx_read_block(hw, hw->buff, pattern_len);
err = st_lsm6dsx_read_block(hw, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
hw->buff, pattern_len,
ST_LSM6DSX_MAX_WORD_LEN);
if (err < 0) {
dev_err(hw->dev,
"failed to read pattern from fifo (err=%d)\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment