Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "A few small updates to drivers.

  Of note we are now deferring probes of i8042 on some Asus devices as
  the controller is not ready to respond to queries first time around
  when the driver is compiled into the kernel"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312
  Input: atmel_mxt_ts - fix double free in mxt_read_info_block
  Input: goodix - fix memory leak in goodix_firmware_upload
  Input: goodix - add id->model mapping for the "9111" model
  Input: goodix - try not to touch the reset-pin on x86/ACPI devices
  Input: i8042 - enable deferred probe quirk for ASUS UM325UA
  Input: elantech - fix stack out of bound access in elantech_change_report_id()
  Input: iqs626a - prohibit inlining of channel parsing functions
  Input: i8042 - add deferred probe support

Documentation/admin-guide/kernel-parameters.txt

@@ -1689,6 +1689,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 

drivers/input/misc/iqs626a.c

@@ -456,9 +456,10 @@ struct iqs626_private {
 	unsigned int suspend_mode;
 };
 
-static int iqs626_parse_events(struct iqs626_private *iqs626,
-			       const struct fwnode_handle *ch_node,
-			       enum iqs626_ch_id ch_id)
+static noinline_for_stack int
+iqs626_parse_events(struct iqs626_private *iqs626,
+		    const struct fwnode_handle *ch_node,
+		    enum iqs626_ch_id ch_id)
 {
 	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
 	struct i2c_client *client = iqs626->client;
@@ -604,9 +605,10 @@ static int iqs626_parse_events(struct iqs626_private *iqs626,
 	return 0;
 }
 
-static int iqs626_parse_ati_target(struct iqs626_private *iqs626,
-				   const struct fwnode_handle *ch_node,
-				   enum iqs626_ch_id ch_id)
+static noinline_for_stack int
+iqs626_parse_ati_target(struct iqs626_private *iqs626,
+			const struct fwnode_handle *ch_node,
+			enum iqs626_ch_id ch_id)
 {
 	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
 	struct i2c_client *client = iqs626->client;
@@ -885,9 +887,10 @@ static int iqs626_parse_trackpad(struct iqs626_private *iqs626,
 	return 0;
 }
 
-static int iqs626_parse_channel(struct iqs626_private *iqs626,
-				const struct fwnode_handle *ch_node,
-				enum iqs626_ch_id ch_id)
+static noinline_for_stack int
+iqs626_parse_channel(struct iqs626_private *iqs626,
+		     const struct fwnode_handle *ch_node,
+		     enum iqs626_ch_id ch_id)
 {
 	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
 	struct i2c_client *client = iqs626->client;

drivers/input/mouse/elantech.c

@@ -1588,7 +1588,13 @@ static const struct dmi_system_id no_hw_res_dmi_table[] = {
  */
 static int elantech_change_report_id(struct psmouse *psmouse)
 {
-	unsigned char param[2] = { 0x10, 0x03 };
+	/*
+	 * NOTE: the code is expecting to receive param[] as an array of 3
+	 * items (see __ps2_command()), even if in this case only 2 are
+	 * actually needed. Make sure the array size is 3 to avoid potential
+	 * stack out-of-bound accesses.
+	 */
+	unsigned char param[3] = { 0x10, 0x03 };
 
 	if (elantech_write_reg_params(psmouse, 0x7, param) ||
 	    elantech_read_reg_params(psmouse, 0x7, param) ||

drivers/input/serio/i8042-x86ia64io.h

@@ -995,6 +995,24 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = {
 	{ }
 };
 
+static const struct dmi_system_id i8042_dmi_probe_defer_table[] __initconst = {
+	{
+		/* ASUS ZenBook UX425UA */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425UA"),
+		},
+	},
+	{
+		/* ASUS ZenBook UM325UA */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
+		},
+	},
+	{ }
+};
+
 #endif /* CONFIG_X86 */
 
 #ifdef CONFIG_PNP
@@ -1315,6 +1333,9 @@ static int __init i8042_platform_init(void)
 	if (dmi_check_system(i8042_dmi_kbdreset_table))
 		i8042_kbdreset = true;
 
+	if (dmi_check_system(i8042_dmi_probe_defer_table))
+		i8042_probe_defer = true;
+
 	/*
 	 * A20 was already enabled during early kernel init. But some buggy
 	 * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to

drivers/input/serio/i8042.c

@@ -45,6 +45,10 @@ static bool i8042_unlock;
 module_param_named(unlock, i8042_unlock, bool, 0);
 MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
 
+static bool i8042_probe_defer;
+module_param_named(probe_defer, i8042_probe_defer, bool, 0);
+MODULE_PARM_DESC(probe_defer, "Allow deferred probing.");
+
 enum i8042_controller_reset_mode {
 	I8042_RESET_NEVER,
 	I8042_RESET_ALWAYS,
@@ -711,7 +715,7 @@ static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version)
  * LCS/Telegraphics.
  */
 
-static int __init i8042_check_mux(void)
+static int i8042_check_mux(void)
 {
 	unsigned char mux_version;
 
@@ -740,10 +744,10 @@ static int __init i8042_check_mux(void)
 /*
  * The following is used to test AUX IRQ delivery.
  */
-static struct completion i8042_aux_irq_delivered __initdata;
-static bool i8042_irq_being_tested __initdata;
+static struct completion i8042_aux_irq_delivered;
+static bool i8042_irq_being_tested;
 
-static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
+static irqreturn_t i8042_aux_test_irq(int irq, void *dev_id)
 {
 	unsigned long flags;
 	unsigned char str, data;
@@ -770,7 +774,7 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
  * verifies success by readinng CTR. Used when testing for presence of AUX
  * port.
  */
-static int __init i8042_toggle_aux(bool on)
+static int i8042_toggle_aux(bool on)
 {
 	unsigned char param;
 	int i;
@@ -798,7 +802,7 @@ static int __init i8042_toggle_aux(bool on)
  * the presence of an AUX interface.
  */
 
-static int __init i8042_check_aux(void)
+static int i8042_check_aux(void)
 {
 	int retval = -1;
 	bool irq_registered = false;
@@ -1005,7 +1009,7 @@ static int i8042_controller_init(void)
 
 		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
 			pr_err("Can't read CTR while initializing i8042\n");
-			return -EIO;
+			return i8042_probe_defer ? -EPROBE_DEFER : -EIO;
 		}
 
 	} while (n < 2 || ctr[0] != ctr[1]);
@@ -1320,7 +1324,7 @@ static void i8042_shutdown(struct platform_device *dev)
 	i8042_controller_reset(false);
 }
 
-static int __init i8042_create_kbd_port(void)
+static int i8042_create_kbd_port(void)
 {
 	struct serio *serio;
 	struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
@@ -1349,7 +1353,7 @@ static int __init i8042_create_kbd_port(void)
 	return 0;
 }
 
-static int __init i8042_create_aux_port(int idx)
+static int i8042_create_aux_port(int idx)
 {
 	struct serio *serio;
 	int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
@@ -1386,13 +1390,13 @@ static int __init i8042_create_aux_port(int idx)
 	return 0;
 }
 
-static void __init i8042_free_kbd_port(void)
+static void i8042_free_kbd_port(void)
 {
 	kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
 	i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
 }
 
-static void __init i8042_free_aux_ports(void)
+static void i8042_free_aux_ports(void)
 {
 	int i;
 
@@ -1402,7 +1406,7 @@ static void __init i8042_free_aux_ports(void)
 	}
 }
 
-static void __init i8042_register_ports(void)
+static void i8042_register_ports(void)
 {
 	int i;
 
@@ -1443,7 +1447,7 @@ static void i8042_free_irqs(void)
 	i8042_aux_irq_registered = i8042_kbd_irq_registered = false;
 }
 
-static int __init i8042_setup_aux(void)
+static int i8042_setup_aux(void)
 {
 	int (*aux_enable)(void);
 	int error;
@@ -1485,7 +1489,7 @@ static int __init i8042_setup_aux(void)
 	return error;
 }
 
-static int __init i8042_setup_kbd(void)
+static int i8042_setup_kbd(void)
 {
 	int error;
 
@@ -1535,7 +1539,7 @@ static int i8042_kbd_bind_notifier(struct notifier_block *nb,
 	return 0;
 }
 
-static int __init i8042_probe(struct platform_device *dev)
+static int i8042_probe(struct platform_device *dev)
 {
 	int error;
 
@@ -1600,6 +1604,7 @@ static struct platform_driver i8042_driver = {
 		.pm	= &i8042_pm_ops,
 #endif
 	},
+	.probe		= i8042_probe,
 	.remove		= i8042_remove,
 	.shutdown	= i8042_shutdown,
 };
@@ -1610,7 +1615,6 @@ static struct notifier_block i8042_kbd_bind_notifier_block = {
 
 static int __init i8042_init(void)
 {
-	struct platform_device *pdev;
 	int err;
 
 	dbg_init();
@@ -1626,17 +1630,29 @@ static int __init i8042_init(void)
 	/* Set this before creating the dev to allow i8042_command to work right away */
 	i8042_present = true;
 
-	pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0);
-	if (IS_ERR(pdev)) {
-		err = PTR_ERR(pdev);
+	err = platform_driver_register(&i8042_driver);
+	if (err)
 		goto err_platform_exit;
+
+	i8042_platform_device = platform_device_alloc("i8042", -1);
+	if (!i8042_platform_device) {
+		err = -ENOMEM;
+		goto err_unregister_driver;
 	}
 
+	err = platform_device_add(i8042_platform_device);
+	if (err)
+		goto err_free_device;
+
 	bus_register_notifier(&serio_bus, &i8042_kbd_bind_notifier_block);
 	panic_blink = i8042_panic_blink;
 
 	return 0;
 
+err_free_device:
+	platform_device_put(i8042_platform_device);
+err_unregister_driver:
+	platform_driver_unregister(&i8042_driver);
  err_platform_exit:
 	i8042_platform_exit();
 	return err;

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -1882,7 +1882,7 @@ static int mxt_read_info_block(struct mxt_data *data)
 	if (error) {
 		dev_err(&client->dev, "Error %d parsing object table\n", error);
 		mxt_free_object_table(data);
-		goto err_free_mem;
+		return error;
 	}
 
 	data->object_table = (struct mxt_object *)(id_buf + MXT_OBJECT_START);

drivers/input/touchscreen/elants_i2c.c

@@ -117,6 +117,19 @@
 #define ELAN_POWERON_DELAY_USEC	500
 #define ELAN_RESET_DELAY_MSEC	20
 
+/* FW boot code version */
+#define BC_VER_H_BYTE_FOR_EKTH3900x1_I2C        0x72
+#define BC_VER_H_BYTE_FOR_EKTH3900x2_I2C        0x82
+#define BC_VER_H_BYTE_FOR_EKTH3900x3_I2C        0x92
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C        0x6D
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C        0x6E
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C       0x77
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C       0x78
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB    0x67
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB    0x68
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB   0x74
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB   0x75
+
 enum elants_chip_id {
 	EKTH3500,
 	EKTF3624,
@@ -736,6 +749,37 @@ static int elants_i2c_validate_remark_id(struct elants_data *ts,
 	return 0;
 }
 
+static bool elants_i2c_should_check_remark_id(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	const u8 bootcode_version = ts->iap_version;
+	bool check;
+
+	/* I2C eKTH3900 and eKTH5312 are NOT support Remark ID */
+	if ((bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x1_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x2_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x3_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB)) {
+		dev_dbg(&client->dev,
+			"eKTH3900/eKTH5312(0x%02x) are not support remark id\n",
+			bootcode_version);
+		check = false;
+	} else if (bootcode_version >= 0x60) {
+		check = true;
+	} else {
+		check = false;
+	}
+
+	return check;
+}
+
 static int elants_i2c_do_update_firmware(struct i2c_client *client,
 					 const struct firmware *fw,
 					 bool force)
@@ -749,7 +793,7 @@ static int elants_i2c_do_update_firmware(struct i2c_client *client,
 	u16 send_id;
 	int page, n_fw_pages;
 	int error;
-	bool check_remark_id = ts->iap_version >= 0x60;
+	bool check_remark_id = elants_i2c_should_check_remark_id(ts);
 
 	/* Recovery mode detection! */
 	if (force) {

drivers/input/touchscreen/goodix.c

@@ -102,6 +102,7 @@ static const struct goodix_chip_id goodix_chip_ids[] = {
 	{ .id = "911", .data = &gt911_chip_data },
 	{ .id = "9271", .data = &gt911_chip_data },
 	{ .id = "9110", .data = &gt911_chip_data },
+	{ .id = "9111", .data = &gt911_chip_data },
 	{ .id = "927", .data = &gt911_chip_data },
 	{ .id = "928", .data = &gt911_chip_data },
 
@@ -650,10 +651,16 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
 
 	usleep_range(6000, 10000);		/* T4: > 5ms */
 
-	/* end select I2C slave addr */
-	error = gpiod_direction_input(ts->gpiod_rst);
-	if (error)
-		goto error;
+	/*
+	 * Put the reset pin back in to input / high-impedance mode to save
+	 * power. Only do this in the non ACPI case since some ACPI boards
+	 * don't have a pull-up, so there the reset pin must stay active-high.
+	 */
+	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) {
+		error = gpiod_direction_input(ts->gpiod_rst);
+		if (error)
+			goto error;
+	}
 
 	return 0;
 
@@ -787,6 +794,14 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		return -EINVAL;
 	}
 
+	/*
+	 * Normally we put the reset pin in input / high-impedance mode to save
+	 * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI
+	 * case, leave the pin as is. This results in the pin not being touched
+	 * at all on x86/ACPI boards, except when needed for error-recover.
+	 */
+	ts->gpiod_rst_flags = GPIOD_ASIS;
+
 	return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping);
 }
 #else
@@ -812,6 +827,12 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 		return -EINVAL;
 	dev = &ts->client->dev;
 
+	/*
+	 * By default we request the reset pin as input, leaving it in
+	 * high-impedance when not resetting the controller to save power.
+	 */
+	ts->gpiod_rst_flags = GPIOD_IN;
+
 	ts->avdd28 = devm_regulator_get(dev, "AVDD28");
 	if (IS_ERR(ts->avdd28)) {
 		error = PTR_ERR(ts->avdd28);
@@ -849,7 +870,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 	ts->gpiod_int = gpiod;
 
 	/* Get the reset line GPIO pin number */
-	gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN);
+	gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags);
 	if (IS_ERR(gpiod)) {
 		error = PTR_ERR(gpiod);
 		if (error != -EPROBE_DEFER)

drivers/input/touchscreen/goodix.h

@@ -87,6 +87,7 @@ struct goodix_ts_data {
 	struct gpio_desc *gpiod_rst;
 	int gpio_count;
 	int gpio_int_idx;
+	enum gpiod_flags gpiod_rst_flags;
 	char id[GOODIX_ID_MAX_LEN + 1];
 	char cfg_name[64];
 	u16 version;

drivers/input/touchscreen/goodix_fwupload.c

@@ -207,7 +207,7 @@ static int goodix_firmware_upload(struct goodix_ts_data *ts)
 
 	error = goodix_reset_no_int_sync(ts);
 	if (error)
-		return error;
+		goto release;
 
 	error = goodix_enter_upload_mode(ts->client);
 	if (error)