Commit 5b60c145 authored by Jamie Lentin's avatar Jamie Lentin Committed by Andrew Lunn

ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi

A lot of device setup is shared between DNS-320 and DNS-325, move the
definitions into a common include.
Signed-off-by: default avatarJamie Lentin <jm@lentin.co.uk>
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
parent 09059e9f
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-320 NAS (Rev A1)";
......@@ -50,45 +50,5 @@ serial@12100 {
clock-frequency = <166666667>;
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x500000>;
};
partition@600000 {
label = "ramdisk";
reg = <0x0600000 0x500000>;
};
partition@b00000 {
label = "image";
reg = <0x0b00000 0x6600000>;
};
partition@7100000 {
label = "mini firmware";
reg = <0x7100000 0xa00000>;
};
partition@7b00000 {
label = "config";
reg = <0x7b00000 0x500000>;
};
};
};
};
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-325 NAS (Rev A1)";
......@@ -53,45 +53,5 @@ serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x500000>;
};
partition@600000 {
label = "ramdisk";
reg = <0x0600000 0x500000>;
};
partition@b00000 {
label = "image";
reg = <0x0b00000 0x6600000>;
};
partition@7100000 {
label = "mini firmware";
reg = <0x7100000 0xa00000>;
};
partition@7b00000 {
label = "config";
reg = <0x7b00000 0x500000>;
};
};
};
};
/include/ "kirkwood.dtsi"
/ {
model = "D-Link DNS NASes (kirkwood-based)";
compatible = "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
ocp@f1000000 {
sata@80000 {
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x500000>;
};
partition@600000 {
label = "ramdisk";
reg = <0x0600000 0x500000>;
};
partition@b00000 {
label = "image";
reg = <0x0b00000 0x6600000>;
};
partition@7100000 {
label = "mini firmware";
reg = <0x7100000 0xa00000>;
};
partition@7b00000 {
label = "config";
reg = <0x7b00000 0x500000>;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment