Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier.
  [ARM] Orion: clean up addr-map.c after window setting code purge
  [ARM] Orion: pass proper t_clk into mv643xx_eth
  [ARM] Orion: use mv643xx_eth driver mbus window handling
  [ARM] pxa: Fix RCSR handling
  [ARM] lubbock: fix compilation
  [ARM] 5032/1: Added cpufreq support for pxa27x CPU
  [ARM] 5031/1: Indentation correction in cpu-pxa.c.
  [ARM] 5028/1: pxafb: fix broken "backward compatibility way" in framebuffer
  [ARM] 4882/2: Correction for S3C2410 clkout generation
  [ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle.
  [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver
  [ARM] 5023/1: Fix broken gpio interrupts on ep93xx
  ns9xxx: fix sparse warning
  ns9xxx: check for irq lockups
  ns9xxx: fix handle_prio_irq to unmask irqs with lower priority

arch/arm/mach-ep93xx/core.c

@@ -280,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	const int port = gpio >> 3;
 	const int port_mask = 1 << (gpio & 7);
 
-	gpio_direction_output(gpio, gpio_get_value(gpio));
+	gpio_direction_input(gpio);
 
 	switch (type) {
 	case IRQT_RISING:

arch/arm/mach-ns9xxx/irq.c

@@ -62,7 +62,7 @@ static struct irq_chip ns9xxx_chip = {
 #if 0
 #define handle_irq handle_level_irq
 #else
-void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
+static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cpu = smp_processor_id();
 	struct irqaction *action;
@@ -70,27 +70,35 @@ void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 
 	spin_lock(&desc->lock);
 
-	if (unlikely(desc->status & IRQ_INPROGRESS))
-		goto out_unlock;
+	BUG_ON(desc->status & IRQ_INPROGRESS);
 
 	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
 	kstat_cpu(cpu).irqs[irq]++;
 
 	action = desc->action;
 	if (unlikely(!action || (desc->status & IRQ_DISABLED)))
-		goto out_unlock;
+		goto out_mask;
 
 	desc->status |= IRQ_INPROGRESS;
 	spin_unlock(&desc->lock);
 
 	action_ret = handle_IRQ_event(irq, action);
 
+	/* XXX: There is no direct way to access noirqdebug, so check
+	 * unconditionally for spurious irqs...
+	 * Maybe this function should go to kernel/irq/chip.c? */
+	note_interrupt(irq, desc, action_ret);
+
 	spin_lock(&desc->lock);
 	desc->status &= ~IRQ_INPROGRESS;
-	if (!(desc->status & IRQ_DISABLED) && desc->chip->ack)
-		desc->chip->ack(irq);
 
-out_unlock:
+	if (desc->status & IRQ_DISABLED)
+out_mask:
+		desc->chip->mask(irq);
+
+	/* ack unconditionally to unmask lower prio irqs */
+	desc->chip->ack(irq);
+
 	spin_unlock(&desc->lock);
 }
 #define handle_irq handle_prio_irq

arch/arm/mach-orion5x/addr-map.c

@@ -34,11 +34,7 @@
  * Non-CPU Masters address decoding --
  * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
  * banks only (the typical use case).
- * Setup access for each master to DDR is issued by common.c.
- *
- * Note: although orion_setbits() and orion_clrbits() are not atomic
- * no locking is necessary here since code in this file is only called
- * at boot time when there is no concurrency issues.
+ * Setup access for each master to DDR is issued by platform device setup.
  */
 
 /*
@@ -48,10 +44,6 @@
 #define TARGET_DEV_BUS		1
 #define TARGET_PCI		3
 #define TARGET_PCIE		4
-#define ATTR_DDR_CS(n)		(((n) ==0) ? 0xe :	\
-				((n) == 1) ? 0xd :	\
-				((n) == 2) ? 0xb :	\
-				((n) == 3) ? 0x7 : 0xf)
 #define ATTR_PCIE_MEM		0x59
 #define ATTR_PCIE_IO		0x51
 #define ATTR_PCIE_WA		0x79
@@ -61,17 +53,12 @@
 #define ATTR_DEV_CS1		0x1d
 #define ATTR_DEV_CS2		0x1b
 #define ATTR_DEV_BOOT		0xf
-#define WIN_EN			1
 
 /*
  * Helpers to get DDR bank info
  */
-#define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) * 8))
-#define DDR_MAX_CS		4
-#define DDR_REG_TO_SIZE(reg)	(((reg) | 0xffffff) + 1)
-#define DDR_REG_TO_BASE(reg)	((reg) & 0xff000000)
-#define DDR_BANK_EN		1
+#define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) << 3))
+#define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) << 3))
 
 /*
  * CPU Address Decode Windows registers
@@ -81,17 +68,6 @@
 #define CPU_WIN_REMAP_LO(n)	ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
 #define CPU_WIN_REMAP_HI(n)	ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
 
-/*
- * Gigabit Ethernet Address Decode Windows registers
- */
-#define ETH_WIN_BASE(win)	ORION5X_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win)	ORION5X_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win)	ORION5X_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN		ORION5X_ETH_REG(0x290)
-#define ETH_WIN_PROT		ORION5X_ETH_REG(0x294)
-#define ETH_MAX_WIN		6
-#define ETH_MAX_REMAP_WIN	4
-
 
 struct mbus_dram_target_info orion5x_mbus_dram_info;
 
@@ -202,39 +178,3 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 {
 	setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
-
-void __init orion5x_setup_eth_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < ETH_MAX_WIN; i++) {
-		orion5x_write(ETH_WIN_BASE(i), 0);
-		orion5x_write(ETH_WIN_SIZE(i), 0);
-		orion5x_setbits(ETH_WIN_EN, 1 << i);
-		orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		if (i < ETH_MAX_REMAP_WIN)
-			orion5x_write(ETH_WIN_REMAP(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 base, size;
-		size = orion5x_read(DDR_SIZE_CS(i));
-		base = orion5x_read(DDR_BASE_CS(i));
-		if (size & DDR_BANK_EN) {
-			base = DDR_REG_TO_BASE(base);
-			size = DDR_REG_TO_SIZE(size);
-			orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
-			orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					TARGET_DDR);
-			orion5x_clrbits(ETH_WIN_EN, 1 << i);
-			orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		}
-	}
-}

arch/arm/mach-orion5x/common.c

@@ -190,6 +190,11 @@ static struct platform_device orion5x_ehci1 = {
  * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
  ****************************************************************************/
 
+struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
+	.dram		= &orion5x_mbus_dram_info,
+	.t_clk		= ORION5X_TCLK,
+};
+
 static struct resource orion5x_eth_shared_resources[] = {
 	{
 		.start	= ORION5X_ETH_PHYS_BASE + 0x2000,
@@ -201,6 +206,9 @@ static struct resource orion5x_eth_shared_resources[] = {
 static struct platform_device orion5x_eth_shared = {
 	.name		= MV643XX_ETH_SHARED_NAME,
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_eth_shared_data,
+	},
 	.num_resources	= 1,
 	.resource	= orion5x_eth_shared_resources,
 };
@@ -362,7 +370,6 @@ void __init orion5x_init(void)
 	 * Setup Orion address map
 	 */
 	orion5x_setup_cpu_mbus_bridge();
-	orion5x_setup_eth_wins();
 
 	/*
 	 * Register devices.

arch/arm/mach-orion5x/common.h

@@ -22,7 +22,6 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
 void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_eth_wins(void);
 
 /*
  * Shared code used internally by other Orion core functions.

arch/arm/mach-pxa/Makefile

@@ -5,6 +5,13 @@
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
 				   time.o gpio.o
+obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
+
+# Generic drivers that other drivers may depend upon
+obj-$(CONFIG_PXA_SSP)		+= ssp.o
+
+# SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
@@ -48,11 +55,6 @@ led-$(CONFIG_MACH_TRIZEPS4)	+= leds-trizeps4.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
-# Misc features
-obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
-obj-$(CONFIG_PXA_SSP)		+= ssp.o
-
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif

arch/arm/mach-pxa/corgi.c

@@ -493,8 +493,6 @@ static struct platform_device *devices[] __initdata = {
 
 static void corgi_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	if (!machine_is_corgi())
 		/* Green LED off tells the bootloader to halt */
 		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
@@ -503,8 +501,6 @@ static void corgi_poweroff(void)
 
 static void corgi_restart(char mode)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
 		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);

arch/arm/mach-pxa/lubbock.c

@@ -396,7 +396,7 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255);
+			  LCD_AC_BIAS_FREQ(255),
 };
 
 #define	MMC_POLL_RATE		msecs_to_jiffies(1000)

arch/arm/mach-pxa/pm.c

@@ -42,20 +42,17 @@ int pxa_pm_enter(suspend_state_t state)
 	if (state != PM_SUSPEND_STANDBY) {
 		pxa_cpu_pm_fns->save(sleep_save);
 		/* before sleeping, calculate and save a checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
 			sleep_save_checksum += sleep_save[i];
 	}
 
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	/* *** go zzz *** */
 	pxa_cpu_pm_fns->enter(state);
 	cpu_init();
 
 	if (state != PM_SUSPEND_STANDBY) {
 		/* after sleeping, validate the checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
 			checksum += sleep_save[i];
 
 		/* if invalid, display message and wait for a hardware reset */
@@ -101,7 +98,8 @@ static int __init pxa_pm_init(void)
 		return -EINVAL;
 	}
 
-	sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL);
+	sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
+			     GFP_KERNEL);
 	if (!sleep_save) {
 		printk(KERN_ERR "failed to alloc memory for pm save\n");
 		return -ENOMEM;

arch/arm/mach-pxa/poodle.c

@@ -326,13 +326,11 @@ static struct platform_device *devices[] __initdata = {
 
 static void poodle_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
 	arm_machine_restart('h');
 }
 
 static void poodle_restart(char mode)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
 	arm_machine_restart('h');
 }
 

arch/arm/mach-pxa/pxa25x.c

@@ -150,9 +150,7 @@ static struct clk pxa25x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_START = 0,
-
-	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
+enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
 
 	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
 	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -162,7 +160,7 @@ enum {	SLEEP_SAVE_START = 0,
 
 	SLEEP_SAVE_CKEN,
 
-	SLEEP_SAVE_SIZE
+	SLEEP_SAVE_COUNT
 };
 
 
@@ -200,6 +198,9 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 
 static void pxa25x_cpu_pm_enter(suspend_state_t state)
 {
+	/* Clear reset status */
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
@@ -210,7 +211,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
-	.save_size	= SLEEP_SAVE_SIZE,
+	.save_count	= SLEEP_SAVE_COUNT,
 	.valid		= suspend_valid_only_mem,
 	.save		= pxa25x_cpu_pm_save,
 	.restore	= pxa25x_cpu_pm_restore,

arch/arm/mach-pxa/pxa27x.c

@@ -181,9 +181,7 @@ static struct clk pxa27x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_START = 0,
-
-	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
+enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
 
 	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
 	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -198,7 +196,7 @@ enum {	SLEEP_SAVE_START = 0,
 	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
 	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
 
-	SLEEP_SAVE_SIZE
+	SLEEP_SAVE_COUNT
 };
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
@@ -251,6 +249,9 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	/* Clear edge-detect status register. */
 	PEDR = 0xDF12FE1B;
 
+	/* Clear reset status */
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		pxa_cpu_standby();
@@ -269,7 +270,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
-	.save_size	= SLEEP_SAVE_SIZE,
+	.save_count	= SLEEP_SAVE_COUNT,
 	.save		= pxa27x_cpu_pm_save,
 	.restore	= pxa27x_cpu_pm_restore,
 	.valid		= pxa27x_cpu_pm_valid,

arch/arm/mach-pxa/pxa3xx.c

@@ -256,12 +256,11 @@ static unsigned long wakeup_src;
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
-enum {	SLEEP_SAVE_START = 0,
-	SLEEP_SAVE_CKENA,
+enum {	SLEEP_SAVE_CKENA,
 	SLEEP_SAVE_CKENB,
 	SLEEP_SAVE_ACCR,
 
-	SLEEP_SAVE_SIZE,
+	SLEEP_SAVE_COUNT,
 };
 
 static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
@@ -376,7 +375,7 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
-	.save_size	= SLEEP_SAVE_SIZE,
+	.save_count	= SLEEP_SAVE_COUNT,
 	.save		= pxa3xx_cpu_pm_save,
 	.restore	= pxa3xx_cpu_pm_restore,
 	.valid		= pxa3xx_cpu_pm_valid,

arch/arm/mach-pxa/spitz.c

@@ -529,8 +529,6 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
 	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
 

arch/arm/mach-pxa/spitz_pm.c

@@ -119,9 +119,6 @@ static void spitz_presuspend(void)
 	/* nRESET_OUT Disable */
 	PSLR |= PSLR_SL_ROD;
 
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR = PCFR_GPR_EN | PCFR_OPDE;
 }

arch/arm/mach-pxa/tosa.c

@@ -467,8 +467,6 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
 	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
 	GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
 

arch/arm/mach-sa1100/pm.c

@@ -43,20 +43,18 @@ extern void sa1100_cpu_resume(void);
  * More ones like CP and general purpose register values are preserved
  * on the stack and then the stack pointer is stored last in sleep.S.
  */
-enum {	SLEEP_SAVE_SP = 0,
-
-	SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
+enum {	SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
 	SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
 
 	SLEEP_SAVE_Ser1SDCR0,
 
-	SLEEP_SAVE_SIZE
+	SLEEP_SAVE_COUNT
 };
 
 
 static int sa11x0_pm_enter(suspend_state_t state)
 {
-	unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
+	unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
 
 	gpio = GPLR;
 

arch/arm/plat-s3c24xx/clock.c

@@ -411,7 +411,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 
 	clk->parent = parent;
 
-	if (clk == &s3c24xx_dclk0)
+	if (clk == &s3c24xx_clkout0)
 		mask = S3C2410_MISCCR_CLK0_MASK;
 	else {
 		source <<= 4;
@@ -437,7 +437,7 @@ struct clk s3c24xx_dclk0 = {
 struct clk s3c24xx_dclk1 = {
 	.name		= "dclk1",
 	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
 	.enable		= s3c24xx_dclk_enable,
 	.set_parent	= s3c24xx_dclk_setparent,
 	.set_rate	= s3c24xx_set_dclk_rate,

drivers/mmc/host/mmci.c

@@ -425,7 +425,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			host->cclk = host->mclk;
 		} else {
 			clk = host->mclk / (2 * ios->clock) - 1;
-			if (clk > 256)
+			if (clk >= 256)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
@@ -512,6 +512,18 @@ static int mmci_probe(struct amba_device *dev, void *id)
 
 	host->plat = plat;
 	host->mclk = clk_get_rate(host->clk);
+	/*
+	 * According to the spec, mclk is max 100 MHz,
+	 * so we try to adjust the clock down to this,
+	 * (if possible).
+	 */
+	if (host->mclk > 100000000) {
+		ret = clk_set_rate(host->clk, 100000000);
+		if (ret < 0)
+			goto clk_disable;
+		host->mclk = clk_get_rate(host->clk);
+		DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+	}
 	host->mmc = mmc;
 	host->base = ioremap(dev->res.start, SZ_4K);
 	if (!host->base) {

drivers/video/pxafb.c

@@ -1301,8 +1301,8 @@ static void pxafb_decode_mode_info(struct pxafb_info *fbi,
 	}
 }
 
-static int pxafb_decode_mach_info(struct pxafb_info *fbi,
-				  struct pxafb_mach_info *inf)
+static void pxafb_decode_mach_info(struct pxafb_info *fbi,
+				   struct pxafb_mach_info *inf)
 {
 	unsigned int lcd_conn = inf->lcd_conn;
 
@@ -1333,7 +1333,7 @@ static int pxafb_decode_mach_info(struct pxafb_info *fbi,
 		fbi->lccr0 = inf->lccr0;
 		fbi->lccr3 = inf->lccr3;
 		fbi->lccr4 = inf->lccr4;
-		return -EINVAL;
+		goto decode_mode;
 	}
 
 	if (lcd_conn == LCD_MONO_STN_8BPP)
@@ -1343,8 +1343,8 @@ static int pxafb_decode_mach_info(struct pxafb_info *fbi,
 	fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
 	fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
 
+decode_mode:
 	pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes);
-	return 0;
 }
 
 static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)

include/asm-arm/arch-pxa/pm.h

@@ -10,7 +10,7 @@
 #include <linux/suspend.h>
 
 struct pxa_cpu_pm_fns {
-	int	save_size;
+	int	save_count;
 	void	(*save)(unsigned long *);
 	void	(*restore)(unsigned long *);
 	int	(*valid)(suspend_state_t state);

include/asm-arm/arch-pxa/system.h

@@ -22,7 +22,8 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode)
 {
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+	if (cpu_is_pxa2xx())
+		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
 
 	if (mode == 's') {
 		/* Jump into ROM at address 0 */