ath11k: Add htt cmd to enable full monitor mode

A new hw_param full_monitor_mode is added to enable full
monitor support for QCN9074.
HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE cmd is sent to FW
to enable the full monitor mode.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1638881695-22155-2-git-send-email-akolli@codeaurora.org

drivers/net/wireless/ath/ath11k/core.c

@@ -74,6 +74,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = false,
 		.idle_ps = false,
 		.supports_sta_ps = false,
@@ -128,6 +129,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = false,
 		.idle_ps = false,
 		.supports_sta_ps = false,
@@ -181,6 +183,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = true,
 		.idle_ps = true,
 		.supports_sta_ps = true,
@@ -234,6 +237,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
+		.full_monitor_mode = true,
 		.supports_shadow_regs = false,
 		.idle_ps = false,
 		.supports_sta_ps = false,
@@ -287,6 +291,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = true,
 		.idle_ps = true,
 		.supports_sta_ps = true,

drivers/net/wireless/ath/ath11k/dp.h

@@ -292,6 +292,7 @@ enum htt_h2t_msg_type {
 	HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG	= 0xc,
 	HTT_H2T_MSG_TYPE_EXT_STATS_CFG		= 0x10,
 	HTT_H2T_MSG_TYPE_PPDU_STATS_CFG		= 0x11,
+	HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE	= 0x17,
 };
 
 #define HTT_VER_REQ_INFO_MSG_ID		GENMASK(7, 0)
@@ -957,6 +958,33 @@ struct htt_rx_ring_tlv_filter {
 	u32 pkt_filter_flags3; /* DATA */
 };
 
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_MSG_TYPE	GENMASK(7, 0)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_PDEV_ID	GENMASK(15, 8)
+
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ENABLE			BIT(0)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ZERO_MPDUS_END		BIT(1)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_NON_ZERO_MPDUS_END	BIT(2)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_RELEASE_RING		GENMASK(10, 3)
+
+/**
+ * Enumeration for full monitor mode destination ring select
+ * 0 - REO destination ring select
+ * 1 - FW destination ring select
+ * 2 - SW destination ring select
+ * 3 - Release destination ring select
+ */
+enum htt_rx_full_mon_release_ring {
+	HTT_RX_MON_RING_REO,
+	HTT_RX_MON_RING_FW,
+	HTT_RX_MON_RING_SW,
+	HTT_RX_MON_RING_RELEASE,
+};
+
+struct htt_rx_full_monitor_mode_cfg_cmd {
+	u32 info0;
+	u32 cfg;
+} __packed;
+
 /* HTT message target->host */
 
 enum htt_t2h_msg_type {

drivers/net/wireless/ath/ath11k/dp_tx.c

@@ -1033,6 +1033,15 @@ int ath11k_dp_tx_htt_monitor_mode_ring_config(struct ath11k *ar, bool reset)
 	struct htt_rx_ring_tlv_filter tlv_filter = {0};
 	int ret = 0, ring_id = 0, i;
 
+	if (ab->hw_params.full_monitor_mode) {
+		ret = ath11k_dp_tx_htt_rx_full_mon_setup(ab,
+							 dp->mac_id, !reset);
+		if (ret < 0) {
+			ath11k_err(ab, "failed to setup full monitor %d\n", ret);
+			return ret;
+		}
+	}
+
 	ring_id = dp->rxdma_mon_buf_ring.refill_buf_ring.ring_id;
 
 	if (!reset) {
@@ -1098,3 +1107,42 @@ int ath11k_dp_tx_htt_monitor_mode_ring_config(struct ath11k *ar, bool reset)
 
 	return ret;
 }
+
+int ath11k_dp_tx_htt_rx_full_mon_setup(struct ath11k_base *ab, int mac_id,
+				       bool config)
+{
+	struct htt_rx_full_monitor_mode_cfg_cmd *cmd;
+	struct sk_buff *skb;
+	int ret, len = sizeof(*cmd);
+
+	skb = ath11k_htc_alloc_skb(ab, len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, len);
+	cmd = (struct htt_rx_full_monitor_mode_cfg_cmd *)skb->data;
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->info0 = FIELD_PREP(HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_MSG_TYPE,
+				HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE);
+
+	cmd->info0 |= FIELD_PREP(HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_PDEV_ID, mac_id);
+
+	cmd->cfg = HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ENABLE |
+		   FIELD_PREP(HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_RELEASE_RING,
+			      HTT_RX_MON_RING_SW);
+	if (config) {
+		cmd->cfg |= HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ZERO_MPDUS_END |
+			    HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_NON_ZERO_MPDUS_END;
+	}
+
+	ret = ath11k_htc_send(&ab->htc, ab->dp.eid, skb);
+	if (ret)
+		goto err_free;
+
+	return 0;
+
+err_free:
+	dev_kfree_skb_any(skb);
+
+	return ret;
+}

drivers/net/wireless/ath/ath11k/dp_tx.h

@@ -37,4 +37,6 @@ int ath11k_dp_tx_htt_rx_filter_setup(struct ath11k_base *ab, u32 ring_id,
 				     int rx_buf_size,
 				     struct htt_rx_ring_tlv_filter *tlv_filter);
 
+int ath11k_dp_tx_htt_rx_full_mon_setup(struct ath11k_base *ab, int mac_id,
+				       bool config);
 #endif

drivers/net/wireless/ath/ath11k/hw.h

@@ -168,6 +168,7 @@ struct ath11k_hw_params {
 
 	u16 interface_modes;
 	bool supports_monitor;
+	bool full_monitor_mode;
 	bool supports_shadow_regs;
 	bool idle_ps;
 	bool supports_sta_ps;