Commit 5c40eea7 authored by Lucas Stach's avatar Lucas Stach Committed by Bjorn Helgaas

PCI: imx6: Remove optional (and unused) IRQs

They are dropped with the new binding.
Signed-off-by: default avatarLucas Stach <l.stach@pengutronix.de>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarRichard Zhu <r65037@freescale.com>
parent e521519a
......@@ -32,9 +32,6 @@
struct imx6_pcie {
int reset_gpio;
int power_on_gpio;
int wake_up_gpio;
int disable_gpio;
struct clk *pcie_bus;
struct clk *pcie_phy;
struct clk *pcie;
......@@ -230,9 +227,6 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
int ret;
if (gpio_is_valid(imx6_pcie->power_on_gpio))
gpio_set_value(imx6_pcie->power_on_gpio, 1);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
......@@ -531,42 +525,6 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
}
}
imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
ret = devm_gpio_request_one(&pdev->dev,
imx6_pcie->power_on_gpio,
GPIOF_OUT_INIT_LOW,
"PCIe power enable");
if (ret) {
dev_err(&pdev->dev, "unable to get power-on gpio\n");
return ret;
}
}
imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0);
if (gpio_is_valid(imx6_pcie->wake_up_gpio)) {
ret = devm_gpio_request_one(&pdev->dev,
imx6_pcie->wake_up_gpio,
GPIOF_IN,
"PCIe wake up");
if (ret) {
dev_err(&pdev->dev, "unable to get wake-up gpio\n");
return ret;
}
}
imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0);
if (gpio_is_valid(imx6_pcie->disable_gpio)) {
ret = devm_gpio_request_one(&pdev->dev,
imx6_pcie->disable_gpio,
GPIOF_OUT_INIT_HIGH,
"PCIe disable endpoint");
if (ret) {
dev_err(&pdev->dev, "unable to get disable-ep gpio\n");
return ret;
}
}
/* Fetch clocks */
imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
if (IS_ERR(imx6_pcie->pcie_phy)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment