Commit 5c8a521d authored by Matt Porter's avatar Matt Porter Committed by Tony Lindgren

Documentation: DT: omap_serial: document missing properties and add an example

The omap_serial.txt binding documentation lacks a number of properties
that are used in DTS files for platforms incorporating this peripheral.
Fix this by documenting the missing required and optional fields and
add an example.
Signed-off-by: default avatarMatt Porter <mporter@konsulko.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 49d09457
...@@ -4,7 +4,27 @@ Required properties: ...@@ -4,7 +4,27 @@ Required properties:
- compatible : should be "ti,omap2-uart" for OMAP2 controllers - compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers - compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers - compatible : should be "ti,omap4-uart" for OMAP4 controllers
- reg : address and length of the register space
- interrupts or interrupts-extended : Should contain the uart interrupt
specifier or both the interrupt
controller phandle and interrupt
specifier.
- ti,hwmods : Must be "uart<n>", n being the instance number (1-based) - ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
Optional properties: Optional properties:
- clock-frequency : frequency of the clock input to the UART - clock-frequency : frequency of the clock input to the UART
- dmas : DMA specifier, consisting of a phandle to the DMA controller
node and a DMA channel number.
- dma-names : "rx" for receive channel, "tx" for transmit channel.
Example:
uart4: serial@49042000 {
compatible = "ti,omap3-uart";
reg = <0x49042000 0x400>;
interrupts = <80>;
dmas = <&sdma 81 &sdma 82>;
dma-names = "tx", "rx";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment