Commit 5cf69dcb authored by AngeloGioacchino Del Regno's avatar AngeloGioacchino Del Regno Committed by Bjorn Andersson

arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration

The SDM630 SoC features an Adreno 508.0 GPU with a minimum frequency
of 160MHz and a maximum of (depending on the speed-bin) 775MHz.
Signed-off-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-20-konrad.dybcio@somainline.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent adc57d4a
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
* Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
* Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
*/
#include <dt-bindings/clock/qcom,gcc-sdm660.h>
......@@ -958,6 +959,87 @@ sd-cd {
};
};
adreno_gpu: gpu@5000000 {
compatible = "qcom,adreno-508.0", "qcom,adreno";
#stream-id-cells = <16>;
reg = <0x05000000 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gpucc GPUCC_RBBMTIMER_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>,
<&gpucc GPUCC_RBCPR_CLK>,
<&gpucc GPUCC_GFX3D_CLK>;
clock-names = "iface",
"rbbmtimer",
"mem",
"mem_iface",
"rbcpr",
"core";
power-domains = <&rpmpd SDM660_VDDMX>;
iommus = <&kgsl_smmu 0>;
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
interconnects = <&gnoc 1 &bimc 5>;
interconnect-names = "gfx-mem";
operating-points-v2 = <&gpu_sdm630_opp_table>;
gpu_sdm630_opp_table: opp-table {
compatible = "operating-points-v2";
opp-775000000 {
opp-hz = /bits/ 64 <775000000>;
opp-level = <RPM_SMD_LEVEL_TURBO>;
opp-peak-kBps = <5412000>;
opp-supported-hw = <0xA2>;
};
opp-647000000 {
opp-hz = /bits/ 64 <647000000>;
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
opp-peak-kBps = <4068000>;
opp-supported-hw = <0xFF>;
};
opp-588000000 {
opp-hz = /bits/ 64 <588000000>;
opp-level = <RPM_SMD_LEVEL_NOM>;
opp-peak-kBps = <3072000>;
opp-supported-hw = <0xFF>;
};
opp-465000000 {
opp-hz = /bits/ 64 <465000000>;
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
opp-peak-kBps = <2724000>;
opp-supported-hw = <0xFF>;
};
opp-370000000 {
opp-hz = /bits/ 64 <370000000>;
opp-level = <RPM_SMD_LEVEL_SVS>;
opp-peak-kBps = <2188000>;
opp-supported-hw = <0xFF>;
};
opp-240000000 {
opp-hz = /bits/ 64 <240000000>;
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
opp-peak-kBps = <1648000>;
opp-supported-hw = <0xFF>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
opp-peak-kBps = <1200000>;
opp-supported-hw = <0xFF>;
};
};
};
kgsl_smmu: iommu@5040000 {
compatible = "qcom,sdm630-smmu-v2",
"qcom,adreno-smmu", "qcom,smmu-v2";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment