Merge branch 'clk-next-s3c64xx' into clk-next

Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt

+* Samsung S3C64xx Clock Controller
+
+The S3C64xx clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the S3C64xx family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
+  - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular S3C64xx SoC and this is specified where applicable.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "fin_pll" - PLL input clock (xtal/extclk) - required,
+ - "xusbxti" - USB xtal - required,
+ - "iiscdclk0" - I2S0 codec clock - optional,
+ - "iiscdclk1" - I2S1 codec clock - optional,
+ - "iiscdclk2" - I2S2 codec clock - optional,
+ - "pcmcdclk0" - PCM0 codec clock - optional,
+ - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+Example: Clock controller node:
+
+	clock: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+Example: Required external clocks:
+
+	fin_pll: clock-fin-pll {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		clock-frequency = <12000000>;
+		#clock-cells = <0>;
+	};
+
+	xusbxti: clock-xusbxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clock SCLK_UART>;
+			status = "disabled";
+		};

drivers/clk/clk-mux.c

@@ -107,6 +107,11 @@ const struct clk_ops clk_mux_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
+const struct clk_ops clk_mux_ro_ops = {
+	.get_parent = clk_mux_get_parent,
+};
+EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
+
 struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
@@ -133,7 +138,10 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
 	}
 
 	init.name = name;
-	init.ops = &clk_mux_ops;
+	if (clk_mux_flags & CLK_MUX_READ_ONLY)
+		init.ops = &clk_mux_ro_ops;
+	else
+		init.ops = &clk_mux_ops;
 	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = parent_names;
 	init.num_parents = num_parents;

drivers/clk/samsung/Makefile

@@ -8,3 +8,6 @@ obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+ifdef CONFIG_COMMON_CLK
+obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
+endif

drivers/clk/samsung/clk-pll.c

@@ -437,6 +437,166 @@ struct clk * __init samsung_clk_register_pll46xx(const char *name,
 	return clk;
 }
 
+/*
+ * PLL6552 Clock Type
+ */
+
+#define PLL6552_LOCK_REG	0x00
+#define PLL6552_CON_REG		0x0c
+
+#define PLL6552_MDIV_MASK	0x3ff
+#define PLL6552_PDIV_MASK	0x3f
+#define PLL6552_SDIV_MASK	0x7
+#define PLL6552_MDIV_SHIFT	16
+#define PLL6552_PDIV_SHIFT	8
+#define PLL6552_SDIV_SHIFT	0
+
+struct samsung_clk_pll6552 {
+	struct clk_hw hw;
+	void __iomem *reg_base;
+};
+
+#define to_clk_pll6552(_hw) container_of(_hw, struct samsung_clk_pll6552, hw)
+
+static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct samsung_clk_pll6552 *pll = to_clk_pll6552(hw);
+	u32 mdiv, pdiv, sdiv, pll_con;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->reg_base + PLL6552_CON_REG);
+	mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
+	pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+	sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll6552_clk_ops = {
+	.recalc_rate = samsung_pll6552_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll6552(const char *name,
+					const char *pname, void __iomem *base)
+{
+	struct samsung_clk_pll6552 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll) {
+		pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+		return NULL;
+	}
+
+	init.name = name;
+	init.ops = &samsung_pll6552_clk_ops;
+	init.parent_names = &pname;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+	pll->reg_base = base;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register pll clock %s\n", __func__,
+				name);
+		kfree(pll);
+	}
+
+	if (clk_register_clkdev(clk, name, NULL))
+		pr_err("%s: failed to register lookup for %s", __func__, name);
+
+	return clk;
+}
+
+/*
+ * PLL6553 Clock Type
+ */
+
+#define PLL6553_LOCK_REG	0x00
+#define PLL6553_CON0_REG	0x0c
+#define PLL6553_CON1_REG	0x10
+
+#define PLL6553_MDIV_MASK	0xff
+#define PLL6553_PDIV_MASK	0x3f
+#define PLL6553_SDIV_MASK	0x7
+#define PLL6553_KDIV_MASK	0xffff
+#define PLL6553_MDIV_SHIFT	16
+#define PLL6553_PDIV_SHIFT	8
+#define PLL6553_SDIV_SHIFT	0
+#define PLL6553_KDIV_SHIFT	0
+
+struct samsung_clk_pll6553 {
+	struct clk_hw hw;
+	void __iomem *reg_base;
+};
+
+#define to_clk_pll6553(_hw) container_of(_hw, struct samsung_clk_pll6553, hw)
+
+static unsigned long samsung_pll6553_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct samsung_clk_pll6553 *pll = to_clk_pll6553(hw);
+	u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
+	u64 fvco = parent_rate;
+
+	pll_con0 = __raw_readl(pll->reg_base + PLL6553_CON0_REG);
+	pll_con1 = __raw_readl(pll->reg_base + PLL6553_CON1_REG);
+	mdiv = (pll_con0 >> PLL6553_MDIV_SHIFT) & PLL6553_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL6553_PDIV_SHIFT) & PLL6553_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL6553_SDIV_SHIFT) & PLL6553_SDIV_MASK;
+	kdiv = (pll_con1 >> PLL6553_KDIV_SHIFT) & PLL6553_KDIV_MASK;
+
+	fvco *= (mdiv << 16) + kdiv;
+	do_div(fvco, (pdiv << sdiv));
+	fvco >>= 16;
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll6553_clk_ops = {
+	.recalc_rate = samsung_pll6553_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll6553(const char *name,
+					const char *pname, void __iomem *base)
+{
+	struct samsung_clk_pll6553 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll) {
+		pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+		return NULL;
+	}
+
+	init.name = name;
+	init.ops = &samsung_pll6553_clk_ops;
+	init.parent_names = &pname;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+	pll->reg_base = base;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register pll clock %s\n", __func__,
+				name);
+		kfree(pll);
+	}
+
+	if (clk_register_clkdev(clk, name, NULL))
+		pr_err("%s: failed to register lookup for %s", __func__, name);
+
+	return clk;
+}
+
 /*
  * PLL2550x Clock Type
  */

drivers/clk/samsung/clk-pll.h

@@ -64,6 +64,10 @@ extern struct clk * __init samsung_clk_register_pll45xx(const char *name,
 extern struct clk * __init samsung_clk_register_pll46xx(const char *name,
 			const char *pname, const void __iomem *con_reg,
 			enum pll46xx_type type);
+extern struct clk *samsung_clk_register_pll6552(const char *name,
+			const char *pname, void __iomem *base);
+extern struct clk *samsung_clk_register_pll6553(const char *name,
+			const char *pname, void __iomem *base);
 extern struct clk * __init samsung_clk_register_pll2550x(const char *name,
 			const char *pname, const void __iomem *reg_base,
 			const unsigned long offset);

include/dt-bindings/clock/samsung,s3c64xx-clock.h

+/*
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung S3C64xx clock controller.
+*/
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C64XX_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C64XX_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+#define CLK27M			1
+#define CLK48M			2
+#define FOUT_APLL		3
+#define FOUT_MPLL		4
+#define FOUT_EPLL		5
+#define ARMCLK			6
+#define HCLKX2			7
+#define HCLK			8
+#define PCLK			9
+
+/* HCLK bus clocks. */
+#define HCLK_3DSE		16
+#define HCLK_UHOST		17
+#define HCLK_SECUR		18
+#define HCLK_SDMA1		19
+#define HCLK_SDMA0		20
+#define HCLK_IROM		21
+#define HCLK_DDR1		22
+#define HCLK_MEM1		23
+#define HCLK_MEM0		24
+#define HCLK_USB		25
+#define HCLK_HSMMC2		26
+#define HCLK_HSMMC1		27
+#define HCLK_HSMMC0		28
+#define HCLK_MDP		29
+#define HCLK_DHOST		30
+#define HCLK_IHOST		31
+#define HCLK_DMA1		32
+#define HCLK_DMA0		33
+#define HCLK_JPEG		34
+#define HCLK_CAMIF		35
+#define HCLK_SCALER		36
+#define HCLK_2D			37
+#define HCLK_TV			38
+#define HCLK_POST0		39
+#define HCLK_ROT		40
+#define HCLK_LCD		41
+#define HCLK_TZIC		42
+#define HCLK_INTC		43
+#define HCLK_MFC		44
+#define HCLK_DDR0		45
+
+/* PCLK bus clocks. */
+#define PCLK_IIC1		48
+#define PCLK_IIS2		49
+#define PCLK_SKEY		50
+#define PCLK_CHIPID		51
+#define PCLK_SPI1		52
+#define PCLK_SPI0		53
+#define PCLK_HSIRX		54
+#define PCLK_HSITX		55
+#define PCLK_GPIO		56
+#define PCLK_IIC0		57
+#define PCLK_IIS1		58
+#define PCLK_IIS0		59
+#define PCLK_AC97		60
+#define PCLK_TZPC		61
+#define PCLK_TSADC		62
+#define PCLK_KEYPAD		63
+#define PCLK_IRDA		64
+#define PCLK_PCM1		65
+#define PCLK_PCM0		66
+#define PCLK_PWM		67
+#define PCLK_RTC		68
+#define PCLK_WDT		69
+#define PCLK_UART3		70
+#define PCLK_UART2		71
+#define PCLK_UART1		72
+#define PCLK_UART0		73
+#define PCLK_MFC		74
+
+/* Special clocks. */
+#define SCLK_UHOST		80
+#define SCLK_MMC2_48		81
+#define SCLK_MMC1_48		82
+#define SCLK_MMC0_48		83
+#define SCLK_MMC2		84
+#define SCLK_MMC1		85
+#define SCLK_MMC0		86
+#define SCLK_SPI1_48		87
+#define SCLK_SPI0_48		88
+#define SCLK_SPI1		89
+#define SCLK_SPI0		90
+#define SCLK_DAC27		91
+#define SCLK_TV27		92
+#define SCLK_SCALER27		93
+#define SCLK_SCALER		94
+#define SCLK_LCD27		95
+#define SCLK_LCD		96
+#define SCLK_FIMC		97
+#define SCLK_POST0_27		98
+#define SCLK_AUDIO2		99
+#define SCLK_POST0		100
+#define SCLK_AUDIO1		101
+#define SCLK_AUDIO0		102
+#define SCLK_SECUR		103
+#define SCLK_IRDA		104
+#define SCLK_UART		105
+#define SCLK_MFC		106
+#define SCLK_CAM		107
+#define SCLK_JPEG		108
+#define SCLK_ONENAND		109
+
+/* MEM0 bus clocks - S3C6410-specific. */
+#define MEM0_CFCON		112
+#define MEM0_ONENAND1		113
+#define MEM0_ONENAND0		114
+#define MEM0_NFCON		115
+#define MEM0_SROM		116
+
+/* Muxes. */
+#define MOUT_APLL		128
+#define MOUT_MPLL		129
+#define MOUT_EPLL		130
+#define MOUT_MFC		131
+#define MOUT_AUDIO0		132
+#define MOUT_AUDIO1		133
+#define MOUT_UART		134
+#define MOUT_SPI0		135
+#define MOUT_SPI1		136
+#define MOUT_MMC0		137
+#define MOUT_MMC1		138
+#define MOUT_MMC2		139
+#define MOUT_UHOST		140
+#define MOUT_IRDA		141
+#define MOUT_LCD		142
+#define MOUT_SCALER		143
+#define MOUT_DAC27		144
+#define MOUT_TV27		145
+#define MOUT_AUDIO2		146
+
+/* Dividers. */
+#define DOUT_MPLL		160
+#define DOUT_SECUR		161
+#define DOUT_CAM		162
+#define DOUT_JPEG		163
+#define DOUT_MFC		164
+#define DOUT_MMC0		165
+#define DOUT_MMC1		166
+#define DOUT_MMC2		167
+#define DOUT_LCD		168
+#define DOUT_SCALER		169
+#define DOUT_UHOST		170
+#define DOUT_SPI0		171
+#define DOUT_SPI1		172
+#define DOUT_AUDIO0		173
+#define DOUT_AUDIO1		174
+#define DOUT_UART		175
+#define DOUT_IRDA		176
+#define DOUT_FIMC		177
+#define DOUT_AUDIO2		178
+
+/* Total number of clocks. */
+#define NR_CLKS			(DOUT_AUDIO2 + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C64XX_CLOCK_H */

include/linux/clk-provider.h

@@ -327,8 +327,10 @@ struct clk_mux {
 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
 #define CLK_MUX_HIWORD_MASK		BIT(2)
+#define CLK_MUX_READ_ONLY	BIT(3) /* mux setting cannot be changed */
 
 extern const struct clk_ops clk_mux_ops;
+extern const struct clk_ops clk_mux_ro_ops;
 
 struct clk *clk_register_mux(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,