Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...

Documentation/ABI/testing/dev-kmsg

+What:		/dev/kmsg
+Date:		Mai 2012
+KernelVersion:	3.5
+Contact:	Kay Sievers <kay@vrfy.org>
+Description:	The /dev/kmsg character device node provides userspace access
+		to the kernel's printk buffer.
+
+		Injecting messages:
+		Every write() to the opened device node places a log entry in
+		the kernel's printk buffer.
+
+		The logged line can be prefixed with a <N> syslog prefix, which
+		carries the syslog priority and facility. The single decimal
+		prefix number is composed of the 3 lowest bits being the syslog
+		priority and the higher bits the syslog facility number.
+
+		If no prefix is given, the priority number is the default kernel
+		log priority and the facility number is set to LOG_USER (1). It
+		is not possible to inject messages from userspace with the
+		facility number LOG_KERN (0), to make sure that the origin of
+		the messages can always be reliably determined.
+
+		Accessing the buffer:
+		Every read() from the opened device node receives one record
+		of the kernel's printk buffer.
+
+		The first read() directly following an open() always returns
+		first message in the buffer; there is no kernel-internal
+		persistent state; many readers can concurrently open the device
+		and read from it, without affecting other readers.
+
+		Every read() will receive the next available record. If no more
+		records are available read() will block, or if O_NONBLOCK is
+		used -EAGAIN returned.
+
+		Messages in the record ring buffer get overwritten as whole,
+		there are never partial messages received by read().
+
+		In case messages get overwritten in the circular buffer while
+		the device is kept open, the next read() will return -EPIPE,
+		and the seek position be updated to the next available record.
+		Subsequent reads() will return available records again.
+
+		Unlike the classic syslog() interface, the 64 bit record
+		sequence numbers allow to calculate the amount of lost
+		messages, in case the buffer gets overwritten. And they allow
+		to reconnect to the buffer and reconstruct the read position
+		if needed, without limiting the interface to a single reader.
+
+		The device supports seek with the following parameters:
+		SEEK_SET, 0
+		  seek to the first entry in the buffer
+		SEEK_END, 0
+		  seek after the last entry in the buffer
+		SEEK_DATA, 0
+		  seek after the last record available at the time
+		  the last SYSLOG_ACTION_CLEAR was issued.
+
+		The output format consists of a prefix carrying the syslog
+		prefix including priority and facility, the 64 bit message
+		sequence number and the monotonic timestamp in microseconds.
+		The values are separated by a ','. Future extensions might
+		add more comma separated values before the terminating ';'.
+		Unknown values should be gracefully ignored.
+
+		The human readable text string starts directly after the ';'
+		and is terminated by a '\n'. Untrusted values derived from
+		hardware or other facilities are printed, therefore
+		all non-printable characters in the log message are escaped
+		by "\x00" C-style hex encoding.
+
+		A line starting with ' ', is a continuation line, adding
+		key/value pairs to the log message, which provide the machine
+		readable context of the message, for reliable processing in
+		userspace.
+
+		Example:
+		7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		 SUBSYSTEM=acpi
+		 DEVICE=+acpi:PNP0A03:00
+		6,339,5140900;NET: Registered protocol family 10
+		30,340,5690716;udevd[80]: starting version 181
+
+		The DEVICE= key uniquely identifies devices the following way:
+		  b12:8        - block dev_t
+		  c127:3       - char dev_t
+		  n8           - netdev ifindex
+		  +sound:card0 - subsystem:devname
+
+Users:		dmesg(1), userspace kernel log consumers

Documentation/ABI/testing/sysfs-class-extcon

+What:		/sys/class/extcon/.../
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the extcon objects.
+		This allows accessing extcon specific variables.
+		The name of extcon object denoted as ... is the name given
+		with extcon_dev_register.
+
+		One extcon device denotes a single external connector
+		port. An external connector may have multiple cables
+		attached simultaneously. Many of docks, cradles, and
+		accessory cables have such capability. For example,
+		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
+		may have both HDMI and Charger attached, or analog audio,
+		video, and USB cables attached simulteneously.
+
+		If there are cables mutually exclusive with each other,
+		such binary relations may be expressed with extcon_dev's
+		mutually_exclusive array.
+
+What:		/sys/class/extcon/.../name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../name shows the name of the extcon
+		object. If the extcon object has an optional callback
+		"show_name" defined, the callback will provide the name with
+		this sysfs node.
+
+What:		/sys/class/extcon/.../state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../state shows and stores the cable
+		attach/detach information of the corresponding extcon object.
+		If the extcon object has an optional callback "show_state"
+		defined, the showing function is overriden with the optional
+		callback.
+
+		If the default callback for showing function is used, the
+		format is like this:
+		# cat state
+		USB_OTG=1
+		HDMI=0
+		TA=1
+		EAR_JACK=0
+		#
+		In this example, the extcon device have USB_OTG and TA
+		cables attached and HDMI and EAR_JACK cables detached.
+
+		In order to update the state of an extcon device, enter a hex
+		state number starting with 0x.
+		 echo 0xHEX > state
+
+		This updates the whole state of the extcon dev.
+		Inputs of all the methods are required to meet the
+		mutually_exclusive contidions if they exist.
+
+		It is recommended to use this "global" state interface if
+		you need to enter the value atomically. The later state
+		interface associated with each cable cannot update
+		multiple cable states of an extcon device simultaneously.
+
+What:		/sys/class/extcon/.../cable.x/name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows the name of cable
+		"x" (integer between 0 and 31) of an extcon device.
+
+What:		/sys/class/extcon/.../cable.x/state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows and stores the
+		state of cable "x" (integer between 0 and 31) of an extcon
+		device. The state value is either 0 (detached) or 1
+		(attached).
+
+What:		/sys/class/extcon/.../mutually_exclusive/...
+Date:		December 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Shows the relations of mutually exclusiveness. For example,
+		if the mutually_exclusive array of extcon_dev is
+		{0x3, 0x5, 0xC, 0x0}, the, the output is:
+		# ls mutually_exclusive/
+		0x3
+		0x5
+		0xc
+		#
+
+		Note that mutually_exclusive is a sub-directory of the extcon
+		device and the file names under the mutually_exclusive
+		directory show the mutually-exclusive sets, not the contents
+		of the files.

Documentation/HOWTO

@@ -218,16 +218,16 @@ The development process
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
-  - main 2.6.x kernel tree
-  - 2.6.x.y -stable kernel tree
-  - 2.6.x -git kernel patches
+  - main 3.x kernel tree
+  - 3.x.y -stable kernel tree
+  - 3.x -git kernel patches
   - subsystem specific kernel trees and patches
-  - the 2.6.x -next kernel tree for integration tests
+  - the 3.x -next kernel tree for integration tests
 
-2.6.x kernel tree
+3.x kernel tree
 -----------------
-2.6.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+3.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v3.x/ directory.  Its development
 process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
 	released according to perceived bug status, not according to a
 	preconceived timeline."
 
-2.6.x.y -stable kernel tree
+3.x.y -stable kernel tree
 ---------------------------
-Kernels with 4-part versions are -stable kernels. They contain
+Kernels with 3-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
-regressions discovered in a given 2.6.x kernel.
+regressions discovered in a given 3.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+If no 3.x.y kernel is available, then the highest numbered 3.x
 kernel is the current stable kernel.
 
-2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
 are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
 documents what kinds of changes are acceptable for the -stable tree, and
 how the release process works.
 
-2.6.x -git patches
+3.x -git patches
 ------------------
 These are daily snapshots of Linus' kernel tree which are managed in a
 git repository (hence the name.) These patches are usually released
@@ -317,13 +317,13 @@ revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
 http://patchwork.kernel.org/.
 
-2.6.x -next kernel tree for integration tests
+3.x -next kernel tree for integration tests
 ---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 2.6.x
+Before updates from subsystem trees are merged into the mainline 3.x
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
-	http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
 	http://linux.f-seidel.de/linux-next/pmwiki/
 
 This way, the -next kernel gives a summary outlook onto what will be

Documentation/devices.txt

@@ -98,7 +98,8 @@ Your cooperation is appreciated.
 		  8 = /dev/random	Nondeterministic random number gen.
 		  9 = /dev/urandom	Faster, less secure random number gen.
 		 10 = /dev/aio		Asynchronous I/O notification interface
-		 11 = /dev/kmsg		Writes to this come out as printk's
+		 11 = /dev/kmsg		Writes to this come out as printk's, reads
+					export the buffered printk records.
 		 12 = /dev/oldmem	Used by crashdump kernels to access
 					the memory of the kernel that crashed.
 

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt

+NVIDIA Tegra20 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra20-mc"
+- reg : Should contain 2 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  GART registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	mc {
+		compatible = "nvidia,tegra20-mc";
+		reg = <0x7000f000 0x024
+		       0x7000f03c 0x3c4>;
+		interrupts = <0 77 0x04>;
+	};

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt

+NVIDIA Tegra30 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra30-mc"
+- reg : Should contain 4 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  SMMU registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	mc {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x010
+		       0x7000f03c 0x1b4
+		       0x7000f200 0x028
+		       0x7000f284 0x17c>;
+		interrupts = <0 77 0x04>;
+	};

Documentation/extcon/porting-android-switch-class

+
+	Staging/Android Switch Class Porting Guide
+	(linux/drivers/staging/android/switch)
+	(c) Copyright 2012 Samsung Electronics
+
+AUTHORS
+MyungJoo Ham <myungjoo.ham@samsung.com>
+
+/*****************************************************************
+ * CHAPTER 1.                                                    *
+ * PORTING SWITCH CLASS DEVICE DRIVERS                           *
+ *****************************************************************/
+
+****** STEP 1. Basic Functionality
+	No extcon extended feature, but switch features only.
+
+- struct switch_dev (fed to switch_dev_register/unregister)
+    @name: no change
+    @dev: no change
+    @index: drop (not used in switch device driver side anyway)
+    @state: no change
+	If you have used @state with magic numbers, keep it
+	at this step.
+    @print_name: no change but type change (switch_dev->extcon_dev)
+    @print_state: no change but type change (switch_dev->extcon_dev)
+
+- switch_dev_register(sdev, dev)
+	=> extcon_dev_register(edev, dev)
+	: no change but type change (sdev->edev)
+- switch_dev_unregister(sdev)
+	=> extcon_dev_unregister(edev)
+	: no change but type change (sdev->edev)
+- switch_get_state(sdev)
+	=> extcon_get_state(edev)
+	: no change but type change (sdev->edev) and (return: int->u32)
+- switch_set_state(sdev, state)
+	=> extcon_set_state(edev, state)
+	: no change but type change (sdev->edev) and (state: int->u32)
+
+With this changes, the ex-switch extcon class device works as it once
+worked as switch class device. However, it will now have additional
+interfaces (both ABI and in-kernel API) and different ABI locations.
+However, if CONFIG_ANDROID is enabled without CONFIG_ANDROID_SWITCH,
+/sys/class/switch/* will be symbolically linked to /sys/class/extcon/
+so that they are still compatible with legacy userspace processes.
+
+****** STEP 2. Multistate (no more magic numbers in state value)
+	Extcon's extended features for switch device drivers with
+	complex features usually required magic numbers in state
+	value of switch_dev. With extcon, such magic numbers that
+	support multiple cables (
+
+  1. Define cable names at edev->supported_cable.
+  2. (Recommended) remove print_state callback.
+  3. Use extcon_get_cable_state_(edev, index) or
+   extcon_get_cable_state(edev, cable_name) instead of
+   extcon_get_state(edev) if you intend to get a state of a specific
+   cable. Same for set_state. This way, you can remove the usage of
+   magic numbers in state value.
+  4. Use extcon_update_state() if you are updating specific bits of
+   the state value.
+
+Example: a switch device driver w/ magic numbers for two cables.
+	"0x00": no cables connected.
+	"0x01": cable 1 connected
+	"0x02": cable 2 connected
+	"0x03": cable 1 and 2 connected
+  1. edev->supported_cable = {"1", "2", NULL};
+  2. edev->print_state = NULL;
+  3. extcon_get_cable_state_(edev, 0) shows cable 1's state.
+     extcon_get_cable_state(edev, "1") shows cable 1's state.
+     extcon_set_cable_state_(edev, 1) sets cable 2's state.
+     extcon_set_cable_state(edev, "2") sets cable 2's state
+  4. extcon_update_state(edev, 0x01, 0) sets the least bit's 0.
+
+****** STEP 3. Notify other device drivers
+
+  You can notify others of the cable attach/detach events with
+notifier chains.
+
+  At the side of other device drivers (the extcon device itself
+does not need to get notified of its own events), there are two
+methods to register notifier_block for cable events:
+(a) for a specific cable or (b) for every cable.
+
+  (a) extcon_register_interest(obj, extcon_name, cable_name, nb)
+	Example: want to get news of "MAX8997_MUIC"'s "USB" cable
+
+	obj = kzalloc(sizeof(struct extcon_specific_cable_nb),
+		      GFP_KERNEL);
+	nb->notifier_call = the_callback_to_handle_usb;
+
+	extcon_register_intereset(obj, "MAX8997_MUIC", "USB", nb);
+
+  (b) extcon_register_notifier(edev, nb)
+	Call nb for any changes in edev.
+
+  Please note that in order to properly behave with method (a),
+the extcon device driver should support multistate feature (STEP 2).
+
+****** STEP 4. Inter-cable relation (mutually exclusive)
+
+  You can provide inter-cable mutually exclusiveness information
+for an extcon device. When cables A and B are declared to be mutually
+exclusive, the two cables cannot be in ATTACHED state simulteneously.
+
+
+/*****************************************************************
+ * CHAPTER 2.                                                    *
+ * PORTING USERSPACE w/ SWITCH CLASS DEVICE SUPPORT              *
+ *****************************************************************/
+
+****** ABI Location
+
+  If "CONFIG_ANDROID" is enabled and "CONFIG_ANDROID_SWITCH" is
+disabled, /sys/class/switch/* are created as symbolic links to
+/sys/class/extcon/*. Because CONFIG_ANDROID_SWITCH creates
+/sys/class/switch directory, we disable symboling linking if
+CONFIG_ANDROID_SWITCH is enabled.
+
+  The two files of switch class, name and state, are provided with
+extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is
+not enabled or print_state callback is supplied, the output of
+state ABI is same with switch class.

Documentation/feature-removal-schedule.txt

@@ -2,7 +2,14 @@ The following is a list of files and features that are going to be
 removed in the kernel source tree.  Every entry should contain what
 exactly is going away, why it is happening, and who is going to be doing
 the work.  When the feature is removed from the kernel, it should also
-be removed from this file.
+be removed from this file.  The suggested deprecation period is 3 releases.
+
+---------------------------
+
+What:	ddebug_query="query" boot cmdline param
+When:	v3.8
+Why:	obsoleted by dyndbg="query" and module.dyndbg="query"
+Who:	Jim Cromie <jim.cromie@gmail.com>, Jason Baron <jbaron@redhat.com>
 
 ---------------------------
 

Documentation/kernel-parameters.txt

@@ -611,7 +611,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	ddebug_query=   [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
 			time. See Documentation/dynamic-debug-howto.txt for
-			details.
+			details.  Deprecated, see dyndbg.
 
 	debug		[KNL] Enable kernel debugging (events log level).
 
@@ -731,6 +731,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	dscc4.setup=	[NET]
 
+	dyndbg[="val"]		[KNL,DYNAMIC_DEBUG]
+	module.dyndbg[="val"]
+			Enable debug messages at boot time.  See
+			Documentation/dynamic-debug-howto.txt for details.
+
 	earlycon=	[KNL] Output early console device and options.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]

Documentation/memory-devices/ti-emif.txt

+TI EMIF SDRAM Controller Driver:
+
+Author
+========
+Aneesh V <aneesh@ti.com>
+
+Location
+============
+driver/memory/emif.c
+
+Supported SoCs:
+===================
+TI OMAP44xx
+TI OMAP54xx
+
+Menuconfig option:
+==========================
+Device Drivers
+	Memory devices
+		Texas Instruments EMIF driver
+
+Description
+===========
+This driver is for the EMIF module available in Texas Instruments
+SoCs. EMIF is an SDRAM controller that, based on its revision,
+supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+This driver takes care of only LPDDR2 memories presently. The
+functions of the driver includes re-configuring AC timing
+parameters and other settings during frequency, voltage and
+temperature changes
+
+Platform Data (see include/linux/platform_data/emif_plat.h):
+=====================================================================
+DDR device details and other board dependent and SoC dependent
+information can be passed through platform data (struct emif_platform_data)
+- DDR device details: 'struct ddr_device_info'
+- Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
+- Custom configurations: customizable policy options through
+  'struct emif_custom_configs'
+- IP revision
+- PHY type
+
+Interface to the external world:
+================================
+EMIF driver registers notifiers for voltage and frequency changes
+affecting EMIF and takes appropriate actions when these are invoked.
+- freq_pre_notify_handling()
+- freq_post_notify_handling()
+- volt_notify_handling()
+
+Debugfs
+========
+The driver creates two debugfs entries per device.
+- regcache_dump : dump of register values calculated and saved for all
+  frequencies used so far.
+- mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
+  indicates the current temperature level of the device.

Documentation/zh_CN/magic-number.txt

@@ -160,7 +160,7 @@ QUEUE_MAGIC_USED      0xf7e1cc33  queue_entry       drivers/scsi/arm/queue.c
 HTB_CMAGIC            0xFEFAFEF1  htb_class         net/sched/sch_htb.c
 NMI_MAGIC             0x48414d4d455201 nmi_s        arch/mips/include/asm/sn/nmi.h
 
-请注意，在声音记忆管理中仍然有每一些被定义的驱动魔术值。查看include/sound/sndmagic.h来获取他们完整的列表信息。很多OSS声音驱动拥有自己从声卡PCI ID构建的魔术值-他们也没有被列在这里。
+请注意，在声音记忆管理中仍然有一些特殊的为每个驱动定义的魔术值。查看include/sound/sndmagic.h来获取他们完整的列表信息。很多OSS声音驱动拥有自己从声卡PCI ID构建的魔术值-他们也没有被列在这里。
 
 IrDA子系统也使用了大量的自己的魔术值，查看include/net/irda/irda.h来获取他们完整的信息。
 

arch/powerpc/mm/hugetlbpage.c

@@ -271,7 +271,8 @@ int alloc_bootmem_huge_page(struct hstate *hstate)
 
 unsigned long gpage_npages[MMU_PAGE_COUNT];
 
-static int __init do_gpage_early_setup(char *param, char *val)
+static int __init do_gpage_early_setup(char *param, char *val,
+				       const char *unused)
 {
 	static phys_addr_t size;
 	unsigned long npages;

drivers/Kconfig

@@ -140,4 +140,8 @@ source "drivers/virt/Kconfig"
 
 source "drivers/devfreq/Kconfig"
 
+source "drivers/extcon/Kconfig"
+
+source "drivers/memory/Kconfig"
+
 endmenu

drivers/Makefile

@@ -134,3 +134,5 @@ obj-$(CONFIG_VIRT_DRIVERS)	+= virt/
 obj-$(CONFIG_HYPERV)		+= hv/
 
 obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
+obj-$(CONFIG_EXTCON)		+= extcon/
+obj-$(CONFIG_MEMORY)		+= memory/

drivers/acpi/pci_link.c

@@ -720,21 +720,21 @@ static int acpi_pci_link_add(struct acpi_device *device)
 	       acpi_device_bid(device));
 	for (i = 0; i < link->irq.possible_count; i++) {
 		if (link->irq.active == link->irq.possible[i]) {
-			printk(" *%d", link->irq.possible[i]);
+			printk(KERN_CONT " *%d", link->irq.possible[i]);
 			found = 1;
 		} else
-			printk(" %d", link->irq.possible[i]);
+			printk(KERN_CONT " %d", link->irq.possible[i]);
 	}
 
-	printk(")");
+	printk(KERN_CONT ")");
 
 	if (!found)
-		printk(" *%d", link->irq.active);
+		printk(KERN_CONT " *%d", link->irq.active);
 
 	if (!link->device->status.enabled)
-		printk(", disabled.");
+		printk(KERN_CONT ", disabled.");
 
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	list_add_tail(&link->list, &acpi_link_list);
 

drivers/acpi/sleep.c

@@ -887,7 +887,7 @@ int __init acpi_sleep_init(void)
 		status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 		if (ACPI_SUCCESS(status)) {
 			sleep_states[i] = 1;
-			printk(" S%d", i);
+			printk(KERN_CONT " S%d", i);
 		}
 	}
 
@@ -901,7 +901,7 @@ int __init acpi_sleep_init(void)
 		hibernation_set_ops(old_suspend_ordering ?
 			&acpi_hibernation_ops_old : &acpi_hibernation_ops);
 		sleep_states[ACPI_STATE_S4] = 1;
-		printk(" S4");
+		printk(KERN_CONT " S4");
 		if (!nosigcheck) {
 			acpi_get_table(ACPI_SIG_FACS, 1,
 				(struct acpi_table_header **)&facs);
@@ -914,11 +914,11 @@ int __init acpi_sleep_init(void)
 	status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 	if (ACPI_SUCCESS(status)) {
 		sleep_states[ACPI_STATE_S5] = 1;
-		printk(" S5");
+		printk(KERN_CONT " S5");
 		pm_power_off_prepare = acpi_power_off_prepare;
 		pm_power_off = acpi_power_off;
 	}
-	printk(")\n");
+	printk(KERN_CONT ")\n");
 	/*
 	 * Register the tts_notifier to reboot notifier list so that the _TTS
 	 * object can also be evaluated when the system enters S5.

drivers/base/bus.c

@@ -21,8 +21,7 @@
 #include "power/power.h"
 
 /* /sys/devices/system */
-/* FIXME: make static after drivers/base/sys.c is deleted */
-struct kset *system_kset;
+static struct kset *system_kset;
 
 #define to_bus_attr(_attr) container_of(_attr, struct bus_attribute, attr)
 

drivers/base/core.c

@@ -25,6 +25,7 @@
 #include <linux/mutex.h>
 #include <linux/async.h>
 #include <linux/pm_runtime.h>
+#include <linux/netdevice.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -65,7 +66,7 @@ static inline int device_is_not_partition(struct device *dev)
  * @dev: struct device to get the name of
  *
  * Will return the device's driver's name if it is bound to a device.  If
- * the device is not bound to a device, it will return the name of the bus
+ * the device is not bound to a driver, it will return the name of the bus
  * it is attached to.  If it is not attached to a bus either, an empty
  * string will be returned.
  */
@@ -878,8 +879,8 @@ EXPORT_SYMBOL_GPL(dev_set_name);
  * to NULL prevents an entry from being created.  class->dev_kobj must
  * be set (or cleared) before any devices are registered to the class
  * otherwise device_create_sys_dev_entry() and
- * device_remove_sys_dev_entry() will disagree about the the presence
- * of the link.
+ * device_remove_sys_dev_entry() will disagree about the presence of
+ * the link.
  */
 static struct kobject *device_to_dev_kobj(struct device *dev)
 {
@@ -1843,15 +1844,60 @@ void device_shutdown(void)
  */
 
 #ifdef CONFIG_PRINTK
-
 int __dev_printk(const char *level, const struct device *dev,
 		 struct va_format *vaf)
 {
+	char dict[128];
+	size_t dictlen = 0;
+	const char *subsys;
+
 	if (!dev)
 		return printk("%s(NULL device *): %pV", level, vaf);
 
-	return printk("%s%s %s: %pV",
-		      level, dev_driver_string(dev), dev_name(dev), vaf);
+	if (dev->class)
+		subsys = dev->class->name;
+	else if (dev->bus)
+		subsys = dev->bus->name;
+	else
+		goto skip;
+
+	dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+			    "SUBSYSTEM=%s", subsys);
+
+	/*
+	 * Add device identifier DEVICE=:
+	 *   b12:8         block dev_t
+	 *   c127:3        char dev_t
+	 *   n8            netdev ifindex
+	 *   +sound:card0  subsystem:devname
+	 */
+	if (MAJOR(dev->devt)) {
+		char c;
+
+		if (strcmp(subsys, "block") == 0)
+			c = 'b';
+		else
+			c = 'c';
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				   "DEVICE=%c%u:%u",
+				   c, MAJOR(dev->devt), MINOR(dev->devt));
+	} else if (strcmp(subsys, "net") == 0) {
+		struct net_device *net = to_net_dev(dev);
+
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				    "DEVICE=n%u", net->ifindex);
+	} else {
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				    "DEVICE=+%s:%s", subsys, dev_name(dev));
+	}
+skip:
+	return printk_emit(0, level[1] - '0',
+			   dictlen ? dict : NULL, dictlen,
+			   "%s %s: %pV",
+			   dev_driver_string(dev), dev_name(dev), vaf);
 }
 EXPORT_SYMBOL(__dev_printk);
 

drivers/base/devres.c

@@ -309,6 +309,10 @@ EXPORT_SYMBOL_GPL(devres_remove);
  * which @match returns 1.  If @match is NULL, it's considered to
  * match all.  If found, the resource is removed atomically and freed.
  *
+ * Note that the release function for the resource will not be called,
+ * only the devres-allocated data will be freed.  The caller becomes
+ * responsible for freeing any other data.
+ *
  * RETURNS:
  * 0 if devres is found and freed, -ENOENT if not found.
  */
@@ -326,6 +330,37 @@ int devres_destroy(struct device *dev, dr_release_t release,
 }
 EXPORT_SYMBOL_GPL(devres_destroy);
 
+
+/**
+ * devres_release - Find a device resource and destroy it, calling release
+ * @dev: Device to find resource from
+ * @release: Look for resources associated with this release function
+ * @match: Match function (optional)
+ * @match_data: Data for the match function
+ *
+ * Find the latest devres of @dev associated with @release and for
+ * which @match returns 1.  If @match is NULL, it's considered to
+ * match all.  If found, the resource is removed atomically, the
+ * release function called and the resource freed.
+ *
+ * RETURNS:
+ * 0 if devres is found and freed, -ENOENT if not found.
+ */
+int devres_release(struct device *dev, dr_release_t release,
+		   dr_match_t match, void *match_data)
+{
+	void *res;
+
+	res = devres_remove(dev, release, match, match_data);
+	if (unlikely(!res))
+		return -ENOENT;
+
+	(*release)(dev, res);
+	devres_free(res);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devres_release);
+
 static int remove_nodes(struct device *dev,
 			struct list_head *first, struct list_head *end,
 			struct list_head *todo)

drivers/base/devtmpfs.c

@@ -7,9 +7,9 @@
  * devtmpfs, a tmpfs-based filesystem is created. Every driver-core
  * device which requests a device node, will add a node in this
  * filesystem.
- * By default, all devices are named after the the name of the
- * device, owned by root and have a default mode of 0600. Subsystems
- * can overwrite the default setting if needed.
+ * By default, all devices are named after the name of the device,
+ * owned by root and have a default mode of 0600. Subsystems can
+ * overwrite the default setting if needed.
  */
 
 #include <linux/kernel.h>

drivers/base/dma-buf.c

@@ -293,7 +293,7 @@ EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment);
  * cpu in the kernel context. Calls begin_cpu_access to allow exporter-specific
  * preparations. Coherency is only guaranteed in the specified range for the
  * specified access direction.
- * @dma_buf:	[in]	buffer to prepare cpu access for.
+ * @dmabuf:	[in]	buffer to prepare cpu access for.
  * @start:	[in]	start of range for cpu access.
  * @len:	[in]	length of range for cpu access.
  * @direction:	[in]	length of range for cpu access.
@@ -320,7 +320,7 @@ EXPORT_SYMBOL_GPL(dma_buf_begin_cpu_access);
  * cpu in the kernel context. Calls end_cpu_access to allow exporter-specific
  * actions. Coherency is only guaranteed in the specified range for the
  * specified access direction.
- * @dma_buf:	[in]	buffer to complete cpu access for.
+ * @dmabuf:	[in]	buffer to complete cpu access for.
  * @start:	[in]	start of range for cpu access.
  * @len:	[in]	length of range for cpu access.
  * @direction:	[in]	length of range for cpu access.
@@ -340,7 +340,7 @@ EXPORT_SYMBOL_GPL(dma_buf_end_cpu_access);
 /**
  * dma_buf_kmap_atomic - Map a page of the buffer object into kernel address
  * space. The same restrictions as for kmap_atomic and friends apply.
- * @dma_buf:	[in]	buffer to map page from.
+ * @dmabuf:	[in]	buffer to map page from.
  * @page_num:	[in]	page in PAGE_SIZE units to map.
  *
  * This call must always succeed, any necessary preparations that might fail
@@ -356,7 +356,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kmap_atomic);
 
 /**
  * dma_buf_kunmap_atomic - Unmap a page obtained by dma_buf_kmap_atomic.
- * @dma_buf:	[in]	buffer to unmap page from.
+ * @dmabuf:	[in]	buffer to unmap page from.
  * @page_num:	[in]	page in PAGE_SIZE units to unmap.
  * @vaddr:	[in]	kernel space pointer obtained from dma_buf_kmap_atomic.
  *
@@ -375,7 +375,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kunmap_atomic);
 /**
  * dma_buf_kmap - Map a page of the buffer object into kernel address space. The
  * same restrictions as for kmap and friends apply.
- * @dma_buf:	[in]	buffer to map page from.
+ * @dmabuf:	[in]	buffer to map page from.
  * @page_num:	[in]	page in PAGE_SIZE units to map.
  *
  * This call must always succeed, any necessary preparations that might fail
@@ -391,7 +391,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kmap);
 
 /**
  * dma_buf_kunmap - Unmap a page obtained by dma_buf_kmap.
- * @dma_buf:	[in]	buffer to unmap page from.
+ * @dmabuf:	[in]	buffer to unmap page from.
  * @page_num:	[in]	page in PAGE_SIZE units to unmap.
  * @vaddr:	[in]	kernel space pointer obtained from dma_buf_kmap.
  *

drivers/base/driver.c

@@ -80,7 +80,7 @@ struct device *driver_find_device(struct device_driver *drv,
 	struct klist_iter i;
 	struct device *dev;
 
-	if (!drv)
+	if (!drv || !drv->p)
 		return NULL;
 
 	klist_iter_init_node(&drv->p->klist_devices, &i,

drivers/char/mem.c

@@ -807,44 +807,6 @@ static const struct file_operations oldmem_fops = {
 };
 #endif
 
-static ssize_t kmsg_writev(struct kiocb *iocb, const struct iovec *iv,
-			   unsigned long count, loff_t pos)
-{
-	char *line, *p;
-	int i;
-	ssize_t ret = -EFAULT;
-	size_t len = iov_length(iv, count);
-
-	line = kmalloc(len + 1, GFP_KERNEL);
-	if (line == NULL)
-		return -ENOMEM;
-
-	/*
-	 * copy all vectors into a single string, to ensure we do
-	 * not interleave our log line with other printk calls
-	 */
-	p = line;
-	for (i = 0; i < count; i++) {
-		if (copy_from_user(p, iv[i].iov_base, iv[i].iov_len))
-			goto out;
-		p += iv[i].iov_len;
-	}
-	p[0] = '\0';
-
-	ret = printk("%s", line);
-	/* printk can add a prefix */
-	if (ret > len)
-		ret = len;
-out:
-	kfree(line);
-	return ret;
-}
-
-static const struct file_operations kmsg_fops = {
-	.aio_write = kmsg_writev,
-	.llseek = noop_llseek,
-};
-
 static const struct memdev {
 	const char *name;
 	umode_t mode;
@@ -863,7 +825,9 @@ static const struct memdev {
 	 [7] = { "full", 0666, &full_fops, NULL },
 	 [8] = { "random", 0666, &random_fops, NULL },
 	 [9] = { "urandom", 0666, &urandom_fops, NULL },
-	[11] = { "kmsg", 0, &kmsg_fops, NULL },
+#ifdef CONFIG_PRINTK
+	[11] = { "kmsg", 0644, &kmsg_fops, NULL },
+#endif
 #ifdef CONFIG_CRASH_DUMP
 	[12] = { "oldmem", 0, &oldmem_fops, NULL },
 #endif

drivers/extcon/Kconfig

+menuconfig EXTCON
+	tristate "External Connector Class (extcon) support"
+	help
+	  Say Y here to enable external connector class (extcon) support.
+	  This allows monitoring external connectors by userspace
+	  via sysfs and uevent and supports external connectors with
+	  multiple states; i.e., an extcon that may have multiple
+	  cables attached. For example, an external connector of a device
+	  may be used to connect an HDMI cable and a AC adaptor, and to
+	  host USB ports. Many of 30-pin connectors including PDMI are
+	  also good examples.
+
+if EXTCON
+
+comment "Extcon Device Drivers"
+
+config EXTCON_GPIO
+	tristate "GPIO extcon support"
+	depends on GENERIC_GPIO
+	help
+	  Say Y here to enable GPIO based extcon support. Note that GPIO
+	  extcon supports single state per extcon instance.
+
+config EXTCON_MAX8997
+	tristate "MAX8997 EXTCON Support"
+	depends on MFD_MAX8997
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
+	  detector and switch.
+
+endif # MULTISTATE_SWITCH

drivers/extcon/Makefile

+#
+# Makefile for external connector class (extcon) devices
+#
+
+obj-$(CONFIG_EXTCON)		+= extcon_class.o
+obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o
+obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o

drivers/staging/android/switch/switch_gpio.c → drivers/extcon/extcon_gpio.c

 /*
- * switch_gpio.c
+ *  drivers/extcon/extcon_gpio.c
+ *
+ *  Single-state GPIO extcon driver based on extcon class
  *
  * Copyright (C) 2008 Google, Inc.
  * Author: Mike Lockwood <lockwood@android.com>
  *
+ * Modified by MyungJoo Ham <myungjoo.ham@samsung.com> to support extcon
+ * (originally switch class is supported)
+ *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
  * may be copied, distributed, and modified under those terms.
@@ -21,152 +26,144 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/extcon.h>
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
-#include "switch.h"
+#include <linux/extcon.h>
+#include <linux/extcon/extcon_gpio.h>
 
-struct gpio_switch_data {
-	struct switch_dev sdev;
+struct gpio_extcon_data {
+	struct extcon_dev edev;
 	unsigned gpio;
-	const char *name_on;
-	const char *name_off;
 	const char *state_on;
 	const char *state_off;
 	int irq;
-	struct work_struct work;
+	struct delayed_work work;
+	unsigned long debounce_jiffies;
 };
 
-static void gpio_switch_work(struct work_struct *work)
+static void gpio_extcon_work(struct work_struct *work)
 {
 	int state;
-	struct gpio_switch_data	*data =
-		container_of(work, struct gpio_switch_data, work);
+	struct gpio_extcon_data	*data =
+		container_of(to_delayed_work(work), struct gpio_extcon_data,
+			     work);
 
 	state = gpio_get_value(data->gpio);
-	switch_set_state(&data->sdev, state);
+	extcon_set_state(&data->edev, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
 {
-	struct gpio_switch_data *switch_data =
-	    (struct gpio_switch_data *)dev_id;
+	struct gpio_extcon_data *extcon_data = dev_id;
 
-	schedule_work(&switch_data->work);
+	schedule_delayed_work(&extcon_data->work,
+			      extcon_data->debounce_jiffies);
 	return IRQ_HANDLED;
 }
 
-static ssize_t switch_gpio_print_state(struct switch_dev *sdev, char *buf)
+static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
 {
-	struct gpio_switch_data	*switch_data =
-		container_of(sdev, struct gpio_switch_data, sdev);
+	struct gpio_extcon_data	*extcon_data =
+		container_of(edev, struct gpio_extcon_data, edev);
 	const char *state;
-	if (switch_get_state(sdev))
-		state = switch_data->state_on;
+	if (extcon_get_state(edev))
+		state = extcon_data->state_on;
 	else
-		state = switch_data->state_off;
+		state = extcon_data->state_off;
 
 	if (state)
 		return sprintf(buf, "%s\n", state);
-	return -1;
+	return -EINVAL;
 }
 
-static int gpio_switch_probe(struct platform_device *pdev)
+static int __devinit gpio_extcon_probe(struct platform_device *pdev)
 {
-	struct gpio_switch_platform_data *pdata = pdev->dev.platform_data;
-	struct gpio_switch_data *switch_data;
+	struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_extcon_data *extcon_data;
 	int ret = 0;
 
 	if (!pdata)
 		return -EBUSY;
+	if (!pdata->irq_flags) {
+		dev_err(&pdev->dev, "IRQ flag is not specified.\n");
+		return -EINVAL;
+	}
 
-	switch_data = kzalloc(sizeof(struct gpio_switch_data), GFP_KERNEL);
-	if (!switch_data)
+	extcon_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
+				   GFP_KERNEL);
+	if (!extcon_data)
 		return -ENOMEM;
 
-	switch_data->sdev.name = pdata->name;
-	switch_data->gpio = pdata->gpio;
-	switch_data->name_on = pdata->name_on;
-	switch_data->name_off = pdata->name_off;
-	switch_data->state_on = pdata->state_on;
-	switch_data->state_off = pdata->state_off;
-	switch_data->sdev.print_state = switch_gpio_print_state;
+	extcon_data->edev.name = pdata->name;
+	extcon_data->gpio = pdata->gpio;
+	extcon_data->state_on = pdata->state_on;
+	extcon_data->state_off = pdata->state_off;
+	if (pdata->state_on && pdata->state_off)
+		extcon_data->edev.print_state = extcon_gpio_print_state;
+	extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
 
-	ret = switch_dev_register(&switch_data->sdev);
+	ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
 	if (ret < 0)
-		goto err_switch_dev_register;
+		goto err_extcon_dev_register;
 
-	ret = gpio_request(switch_data->gpio, pdev->name);
+	ret = gpio_request_one(extcon_data->gpio, GPIOF_DIR_IN, pdev->name);
 	if (ret < 0)
 		goto err_request_gpio;
 
-	ret = gpio_direction_input(switch_data->gpio);
-	if (ret < 0)
-		goto err_set_gpio_input;
-
-	INIT_WORK(&switch_data->work, gpio_switch_work);
+	INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
 
-	switch_data->irq = gpio_to_irq(switch_data->gpio);
-	if (switch_data->irq < 0) {
-		ret = switch_data->irq;
+	extcon_data->irq = gpio_to_irq(extcon_data->gpio);
+	if (extcon_data->irq < 0) {
+		ret = extcon_data->irq;
 		goto err_detect_irq_num_failed;
 	}
 
-	ret = request_irq(switch_data->irq, gpio_irq_handler,
-			  IRQF_TRIGGER_LOW, pdev->name, switch_data);
+	ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
+				      pdata->irq_flags, pdev->name,
+				      extcon_data);
 	if (ret < 0)
 		goto err_request_irq;
 
 	/* Perform initial detection */
-	gpio_switch_work(&switch_data->work);
+	gpio_extcon_work(&extcon_data->work.work);
 
 	return 0;
 
 err_request_irq:
 err_detect_irq_num_failed:
-err_set_gpio_input:
-	gpio_free(switch_data->gpio);
+	gpio_free(extcon_data->gpio);
 err_request_gpio:
-	switch_dev_unregister(&switch_data->sdev);
-err_switch_dev_register:
-	kfree(switch_data);
+	extcon_dev_unregister(&extcon_data->edev);
+err_extcon_dev_register:
+	devm_kfree(&pdev->dev, extcon_data);
 
 	return ret;
 }
 
-static int __devexit gpio_switch_remove(struct platform_device *pdev)
+static int __devexit gpio_extcon_remove(struct platform_device *pdev)
 {
-	struct gpio_switch_data *switch_data = platform_get_drvdata(pdev);
+	struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
 
-	cancel_work_sync(&switch_data->work);
-	gpio_free(switch_data->gpio);
-	switch_dev_unregister(&switch_data->sdev);
-	kfree(switch_data);
+	cancel_delayed_work_sync(&extcon_data->work);
+	gpio_free(extcon_data->gpio);
+	extcon_dev_unregister(&extcon_data->edev);
+	devm_kfree(&pdev->dev, extcon_data);
 
 	return 0;
 }
 
-static struct platform_driver gpio_switch_driver = {
-	.probe		= gpio_switch_probe,
-	.remove		= __devexit_p(gpio_switch_remove),
+static struct platform_driver gpio_extcon_driver = {
+	.probe		= gpio_extcon_probe,
+	.remove		= __devexit_p(gpio_extcon_remove),
 	.driver		= {
-		.name	= "switch-gpio",
+		.name	= "extcon-gpio",
 		.owner	= THIS_MODULE,
 	},
 };
 
-static int __init gpio_switch_init(void)
-{
-	return platform_driver_register(&gpio_switch_driver);
-}
-
-static void __exit gpio_switch_exit(void)
-{
-	platform_driver_unregister(&gpio_switch_driver);
-}
-
-module_init(gpio_switch_init);
-module_exit(gpio_switch_exit);
+module_platform_driver(gpio_extcon_driver);
 
 MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
-MODULE_DESCRIPTION("GPIO Switch driver");
+MODULE_DESCRIPTION("GPIO extcon driver");
 MODULE_LICENSE("GPL");

drivers/gpio/devres.c

@@ -83,8 +83,7 @@ EXPORT_SYMBOL(devm_gpio_request);
 void devm_gpio_free(struct device *dev, unsigned int gpio)
 {
 
-	WARN_ON(devres_destroy(dev, devm_gpio_release, devm_gpio_match,
+	WARN_ON(devres_release(dev, devm_gpio_release, devm_gpio_match,
 		&gpio));
-	gpio_free(gpio);
 }
 EXPORT_SYMBOL(devm_gpio_free);

drivers/hv/channel_mgmt.c

@@ -46,40 +46,61 @@ struct vmbus_channel_message_table_entry {
  *
  * @icmsghdrp is of type &struct icmsg_hdr.
  * @negop is of type &struct icmsg_negotiate.
- * Set up and fill in default negotiate response message. This response can
- * come from both the vmbus driver and the hv_utils driver. The current api
- * will respond properly to both Windows 2008 and Windows 2008-R2 operating
- * systems.
+ * Set up and fill in default negotiate response message.
+ *
+ * The max_fw_version specifies the maximum framework version that
+ * we can support and max _srv_version specifies the maximum service
+ * version we can support. A special value MAX_SRV_VER can be
+ * specified to indicate that we can handle the maximum version
+ * exposed by the host.
  *
  * Mainly used by Hyper-V drivers.
  */
 void vmbus_prep_negotiate_resp(struct icmsg_hdr *icmsghdrp,
-			       struct icmsg_negotiate *negop, u8 *buf)
+				struct icmsg_negotiate *negop, u8 *buf,
+				int max_fw_version, int max_srv_version)
 {
-	if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-		icmsghdrp->icmsgsize = 0x10;
-
-		negop = (struct icmsg_negotiate *)&buf[
-			sizeof(struct vmbuspipe_hdr) +
-			sizeof(struct icmsg_hdr)];
-
-		if (negop->icframe_vercnt == 2 &&
-		   negop->icversion_data[1].major == 3) {
-			negop->icversion_data[0].major = 3;
-			negop->icversion_data[0].minor = 0;
-			negop->icversion_data[1].major = 3;
-			negop->icversion_data[1].minor = 0;
-		} else {
-			negop->icversion_data[0].major = 1;
-			negop->icversion_data[0].minor = 0;
-			negop->icversion_data[1].major = 1;
-			negop->icversion_data[1].minor = 0;
-		}
+	int icframe_vercnt;
+	int icmsg_vercnt;
+	int i;
+
+	icmsghdrp->icmsgsize = 0x10;
+
+	negop = (struct icmsg_negotiate *)&buf[
+		sizeof(struct vmbuspipe_hdr) +
+		sizeof(struct icmsg_hdr)];
+
+	icframe_vercnt = negop->icframe_vercnt;
+	icmsg_vercnt = negop->icmsg_vercnt;
+
+	/*
+	 * Select the framework version number we will
+	 * support.
+	 */
+
+	for (i = 0; i < negop->icframe_vercnt; i++) {
+		if (negop->icversion_data[i].major <= max_fw_version)
+			icframe_vercnt = negop->icversion_data[i].major;
+	}
 
-		negop->icframe_vercnt = 1;
-		negop->icmsg_vercnt = 1;
+	for (i = negop->icframe_vercnt;
+		 (i < negop->icframe_vercnt + negop->icmsg_vercnt); i++) {
+		if (negop->icversion_data[i].major <= max_srv_version)
+			icmsg_vercnt = negop->icversion_data[i].major;
 	}
+
+	/*
+	 * Respond with the maximum framework and service
+	 * version numbers we can support.
+	 */
+	negop->icframe_vercnt = 1;
+	negop->icmsg_vercnt = 1;
+	negop->icversion_data[0].major = icframe_vercnt;
+	negop->icversion_data[0].minor = 0;
+	negop->icversion_data[1].major = icmsg_vercnt;
+	negop->icversion_data[1].minor = 0;
 }
+
 EXPORT_SYMBOL_GPL(vmbus_prep_negotiate_resp);
 
 /*

drivers/hv/hv.c

@@ -252,7 +252,7 @@ void hv_cleanup(void)
  *
  * This involves a hypercall.
  */
-u16 hv_post_message(union hv_connection_id connection_id,
+int hv_post_message(union hv_connection_id connection_id,
 		  enum hv_message_type message_type,
 		  void *payload, size_t payload_size)
 {

drivers/hv/hv_kvp.c

@@ -394,7 +394,8 @@ void hv_kvp_onchannelcallback(void *context)
 			sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, negop, recv_buffer);
+			vmbus_prep_negotiate_resp(icmsghdrp, negop,
+				 recv_buffer, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			kvp_msg = (struct hv_kvp_msg *)&recv_buffer[
 				sizeof(struct vmbuspipe_hdr) +

drivers/hv/hv_util.c

@@ -70,7 +70,8 @@ static void shutdown_onchannelcallback(void *context)
 			sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, negop, shut_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, negop,
+					shut_txf_buf, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			shutdown_msg =
 				(struct shutdown_msg_data *)&shut_txf_buf[
@@ -195,7 +196,8 @@ static void timesync_onchannelcallback(void *context)
 				sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, NULL, time_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, NULL, time_txf_buf,
+						MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			timedatap = (struct ictimesync_data *)&time_txf_buf[
 				sizeof(struct vmbuspipe_hdr) +
@@ -234,7 +236,8 @@ static void heartbeat_onchannelcallback(void *context)
 				sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, NULL, hbeat_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, NULL,
+				hbeat_txf_buf, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			heartbeat_msg =
 				(struct heartbeat_msg_data *)&hbeat_txf_buf[

drivers/hv/hyperv_vmbus.h

@@ -495,7 +495,7 @@ extern int hv_init(void);
 
 extern void hv_cleanup(void);
 
-extern u16 hv_post_message(union hv_connection_id connection_id,
+extern int hv_post_message(union hv_connection_id connection_id,
 			 enum hv_message_type message_type,
 			 void *payload, size_t payload_size);
 

drivers/memory/Kconfig

+#
+# Memory devices
+#
+
+menuconfig MEMORY
+	bool "Memory Controller drivers"
+
+if MEMORY
+
+config TI_EMIF
+	tristate "Texas Instruments EMIF driver"
+	depends on ARCH_OMAP2PLUS
+	select DDR
+	help
+	  This driver is for the EMIF module available in Texas Instruments
+	  SoCs. EMIF is an SDRAM controller that, based on its revision,
+	  supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+	  This driver takes care of only LPDDR2 memories presently. The
+	  functions of the driver includes re-configuring AC timing
+	  parameters and other settings during frequency, voltage and
+	  temperature changes
+
+config TEGRA20_MC
+	bool "Tegra20 Memory Controller(MC) driver"
+	default y
+	depends on ARCH_TEGRA_2x_SOC
+	help
+	  This driver is for the Memory Controller(MC) module available
+	  in Tegra20 SoCs, mainly for a address translation fault
+	  analysis, especially for IOMMU/GART(Graphics Address
+	  Relocation Table) module.
+
+config TEGRA30_MC
+	bool "Tegra30 Memory Controller(MC) driver"
+	default y
+	depends on ARCH_TEGRA_3x_SOC
+	help
+	  This driver is for the Memory Controller(MC) module available
+	  in Tegra30 SoCs, mainly for a address translation fault
+	  analysis, especially for IOMMU/SMMU(System Memory Management
+	  Unit) module.
+
+endif

drivers/memory/Makefile

+#
+# Makefile for memory devices
+#
+
+obj-$(CONFIG_TI_EMIF)		+= emif.o
+obj-$(CONFIG_TEGRA20_MC)	+= tegra20-mc.o
+obj-$(CONFIG_TEGRA30_MC)	+= tegra30-mc.o

drivers/memory/tegra20-mc.c

+/*
+ * Tegra20 Memory Controller
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define DRV_NAME "tegra20-mc"
+
+#define MC_INTSTATUS			0x0
+#define MC_INTMASK			0x4
+
+#define MC_INT_ERR_SHIFT		6
+#define MC_INT_ERR_MASK			(0x1f << MC_INT_ERR_SHIFT)
+#define MC_INT_DECERR_EMEM		BIT(MC_INT_ERR_SHIFT)
+#define MC_INT_INVALID_GART_PAGE	BIT(MC_INT_ERR_SHIFT + 1)
+#define MC_INT_SECURITY_VIOLATION	BIT(MC_INT_ERR_SHIFT + 2)
+#define MC_INT_ARBITRATION_EMEM		BIT(MC_INT_ERR_SHIFT + 3)
+
+#define MC_GART_ERROR_REQ		0x30
+#define MC_DECERR_EMEM_OTHERS_STATUS	0x58
+#define MC_SECURITY_VIOLATION_STATUS	0x74
+
+#define SECURITY_VIOLATION_TYPE		BIT(30)	/* 0=TRUSTZONE, 1=CARVEOUT */
+
+#define MC_CLIENT_ID_MASK		0x3f
+
+#define NUM_MC_REG_BANKS		2
+
+struct tegra20_mc {
+	void __iomem *regs[NUM_MC_REG_BANKS];
+	struct device *dev;
+};
+
+static inline u32 mc_readl(struct tegra20_mc *mc, u32 offs)
+{
+	u32 val = 0;
+
+	if (offs < 0x24)
+		val = readl(mc->regs[0] + offs);
+	if (offs < 0x400)
+		val = readl(mc->regs[1] + offs - 0x3c);
+
+	return val;
+}
+
+static inline void mc_writel(struct tegra20_mc *mc, u32 val, u32 offs)
+{
+	if (offs < 0x24) {
+		writel(val, mc->regs[0] + offs);
+		return;
+	}
+	if (offs < 0x400) {
+		writel(val, mc->regs[1] + offs - 0x3c);
+		return;
+	}
+}
+
+static const char * const tegra20_mc_client[] = {
+	"cbr_display0a",
+	"cbr_display0ab",
+	"cbr_display0b",
+	"cbr_display0bb",
+	"cbr_display0c",
+	"cbr_display0cb",
+	"cbr_display1b",
+	"cbr_display1bb",
+	"cbr_eppup",
+	"cbr_g2pr",
+	"cbr_g2sr",
+	"cbr_mpeunifbr",
+	"cbr_viruv",
+	"csr_avpcarm7r",
+	"csr_displayhc",
+	"csr_displayhcb",
+	"csr_fdcdrd",
+	"csr_g2dr",
+	"csr_host1xdmar",
+	"csr_host1xr",
+	"csr_idxsrd",
+	"csr_mpcorer",
+	"csr_mpe_ipred",
+	"csr_mpeamemrd",
+	"csr_mpecsrd",
+	"csr_ppcsahbdmar",
+	"csr_ppcsahbslvr",
+	"csr_texsrd",
+	"csr_vdebsevr",
+	"csr_vdember",
+	"csr_vdemcer",
+	"csr_vdetper",
+	"cbw_eppu",
+	"cbw_eppv",
+	"cbw_eppy",
+	"cbw_mpeunifbw",
+	"cbw_viwsb",
+	"cbw_viwu",
+	"cbw_viwv",
+	"cbw_viwy",
+	"ccw_g2dw",
+	"csw_avpcarm7w",
+	"csw_fdcdwr",
+	"csw_host1xw",
+	"csw_ispw",
+	"csw_mpcorew",
+	"csw_mpecswr",
+	"csw_ppcsahbdmaw",
+	"csw_ppcsahbslvw",
+	"csw_vdebsevw",
+	"csw_vdembew",
+	"csw_vdetpmw",
+};
+
+static void tegra20_mc_decode(struct tegra20_mc *mc, int n)
+{
+	u32 addr, req;
+	const char *client = "Unknown";
+	int idx, cid;
+	const struct reg_info {
+		u32 offset;
+		u32 write_bit;	/* 0=READ, 1=WRITE */
+		int cid_shift;
+		char *message;
+	} reg[] = {
+		{
+			.offset = MC_DECERR_EMEM_OTHERS_STATUS,
+			.write_bit = 31,
+			.message = "MC_DECERR",
+		},
+		{
+			.offset	= MC_GART_ERROR_REQ,
+			.cid_shift = 1,
+			.message = "MC_GART_ERR",
+
+		},
+		{
+			.offset = MC_SECURITY_VIOLATION_STATUS,
+			.write_bit = 31,
+			.message = "MC_SECURITY_ERR",
+		},
+	};
+
+	idx = n - MC_INT_ERR_SHIFT;
+	if ((idx < 0) || (idx >= ARRAY_SIZE(reg))) {
+		dev_err_ratelimited(mc->dev, "Unknown interrupt status %08lx\n",
+				    BIT(n));
+		return;
+	}
+
+	req = mc_readl(mc, reg[idx].offset);
+	cid = (req >> reg[idx].cid_shift) & MC_CLIENT_ID_MASK;
+	if (cid < ARRAY_SIZE(tegra20_mc_client))
+		client = tegra20_mc_client[cid];
+
+	addr = mc_readl(mc, reg[idx].offset + sizeof(u32));
+
+	dev_err_ratelimited(mc->dev, "%s (0x%08x): 0x%08x %s (%s %s)\n",
+			   reg[idx].message, req, addr, client,
+			   (req & BIT(reg[idx].write_bit)) ? "write" : "read",
+			   (reg[idx].offset == MC_SECURITY_VIOLATION_STATUS) ?
+			   ((req & SECURITY_VIOLATION_TYPE) ?
+			    "carveout" : "trustzone") : "");
+}
+
+static const struct of_device_id tegra20_mc_of_match[] __devinitconst = {
+	{ .compatible = "nvidia,tegra20-mc", },
+	{},
+};
+
+static irqreturn_t tegra20_mc_isr(int irq, void *data)
+{
+	u32 stat, mask, bit;
+	struct tegra20_mc *mc = data;
+
+	stat = mc_readl(mc, MC_INTSTATUS);
+	mask = mc_readl(mc, MC_INTMASK);
+	mask &= stat;
+	if (!mask)
+		return IRQ_NONE;
+	while ((bit = ffs(mask)) != 0)
+		tegra20_mc_decode(mc, bit - 1);
+	mc_writel(mc, stat, MC_INTSTATUS);
+	return IRQ_HANDLED;
+}
+
+static int __devinit tegra20_mc_probe(struct platform_device *pdev)
+{
+	struct resource *irq;
+	struct tegra20_mc *mc;
+	int i, err;
+	u32 intmask;
+
+	mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
+	if (!mc)
+		return -ENOMEM;
+	mc->dev = &pdev->dev;
+
+	for (i = 0; i < ARRAY_SIZE(mc->regs); i++) {
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			return -ENODEV;
+		mc->regs[i] = devm_request_and_ioremap(&pdev->dev, res);
+		if (!mc->regs[i])
+			return -EBUSY;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq)
+		return -ENODEV;
+	err = devm_request_irq(&pdev->dev, irq->start, tegra20_mc_isr,
+			       IRQF_SHARED, dev_name(&pdev->dev), mc);
+	if (err)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, mc);
+
+	intmask = MC_INT_INVALID_GART_PAGE |
+		MC_INT_DECERR_EMEM | MC_INT_SECURITY_VIOLATION;
+	mc_writel(mc, intmask, MC_INTMASK);
+	return 0;
+}
+
+static struct platform_driver tegra20_mc_driver = {
+	.probe = tegra20_mc_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = tegra20_mc_of_match,
+	},
+};
+module_platform_driver(tegra20_mc_driver);
+
+MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
+MODULE_DESCRIPTION("Tegra20 MC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/misc/Kconfig

@@ -508,14 +508,6 @@ config USB_SWITCH_FSA9480
 	  stereo and mono audio, video, microphone and UART data to use
 	  a common connector port.
 
-config MAX8997_MUIC
-	tristate "MAX8997 MUIC Support"
-	depends on MFD_MAX8997
-	help
-	  If you say yes here you get support for the MUIC device of
-	  Maxim MAX8997 PMIC.
-	  The MAX8997 MUIC is a USB port accessory detector and switch.
-
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"

drivers/misc/Makefile

@@ -50,4 +50,3 @@ obj-y				+= lis3lv02d/
 obj-y				+= carma/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
-obj-$(CONFIG_MAX8997_MUIC)	+= max8997-muic.o

drivers/parport/parport_pc.c

@@ -2075,7 +2075,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 
 	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
 	if (p->base_hi && priv->ecr)
-		printk(" (0x%lx)", p->base_hi);
+		printk(KERN_CONT " (0x%lx)", p->base_hi);
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
 		parport_irq_probe(p);
@@ -2086,7 +2086,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		p->irq = PARPORT_IRQ_NONE;
 	}
 	if (p->irq != PARPORT_IRQ_NONE) {
-		printk(", irq %d", p->irq);
+		printk(KERN_CONT ", irq %d", p->irq);
 		priv->ctr_writable |= 0x10;
 
 		if (p->dma == PARPORT_DMA_AUTO) {
@@ -2110,21 +2110,21 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
 #endif /* IEEE 1284 support */
 		if (p->dma != PARPORT_DMA_NONE) {
-			printk(", dma %d", p->dma);
+			printk(KERN_CONT ", dma %d", p->dma);
 			p->modes |= PARPORT_MODE_DMA;
 		} else
-			printk(", using FIFO");
+			printk(KERN_CONT ", using FIFO");
 	} else
 		/* We can't use the DMA channel after all. */
 		p->dma = PARPORT_DMA_NONE;
 #endif /* Allowed to use FIFO/DMA */
 
-	printk(" [");
+	printk(KERN_CONT " [");
 
 #define printmode(x) \
 	{\
 		if (p->modes & PARPORT_MODE_##x) {\
-			printk("%s%s", f ? "," : "", #x);\
+			printk(KERN_CONT "%s%s", f ? "," : "", #x);\
 			f++;\
 		} \
 	}
@@ -2140,9 +2140,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	}
 #undef printmode
 #ifndef CONFIG_PARPORT_1284
-	printk("(,...)");
+	printk(KERN_CONT "(,...)");
 #endif /* CONFIG_PARPORT_1284 */
-	printk("]\n");
+	printk(KERN_CONT "]\n");
 	if (probedirq != PARPORT_IRQ_NONE)
 		printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
 

drivers/staging/android/Kconfig

@@ -53,8 +53,6 @@ config ANDROID_LOW_MEMORY_KILLER
 	---help---
 	  Register processes to be killed when memory is low
 
-source "drivers/staging/android/switch/Kconfig"
-
 config ANDROID_INTF_ALARM
 	bool "Android alarm driver"
 	depends on RTC_CLASS
@@ -80,7 +78,6 @@ config ANDROID_ALARM_OLDDRV_COMPAT
 	  Provides preprocessor alias to aid compatability with
 	  older out-of-tree drivers that use the Android Alarm
 	  in-kernel API. This will be removed eventually.
-
 endif # if ANDROID
 
 endmenu

drivers/staging/android/Makefile

@@ -6,6 +6,5 @@ obj-$(CONFIG_ANDROID_RAM_CONSOLE)	+= ram_console.o
 obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
 obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
 obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o
-obj-$(CONFIG_ANDROID_SWITCH)		+= switch/
 obj-$(CONFIG_ANDROID_INTF_ALARM)	+= alarm.o
 obj-$(CONFIG_ANDROID_INTF_ALARM_DEV)	+= alarm-dev.o

drivers/staging/android/switch/Kconfig

-menuconfig ANDROID_SWITCH
-	tristate "Android Switch class support"
-	help
-	  Say Y here to enable Android switch class support. This allows
-	  monitoring switches by userspace via sysfs and uevent.
-
-config ANDROID_SWITCH_GPIO
-	tristate "Android GPIO Switch support"
-	depends on GENERIC_GPIO && ANDROID_SWITCH
-	help
-	  Say Y here to enable GPIO based switch support.

drivers/staging/android/switch/Makefile

-# Android Switch Class Driver
-obj-$(CONFIG_ANDROID_SWITCH)		+= switch_class.o
-obj-$(CONFIG_ANDROID_SWITCH_GPIO)	+= switch_gpio.o
-

drivers/uio/uio_pdrv_genirq.c

@@ -146,6 +146,14 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	priv->flags = 0; /* interrupt is enabled to begin with */
 	priv->pdev = pdev;
 
+	if (!uioinfo->irq) {
+		ret = platform_get_irq(pdev, 0);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to get IRQ\n");
+			goto bad0;
+		}
+		uioinfo->irq = ret;
+	}
 	uiomem = &uioinfo->mem[0];
 
 	for (i = 0; i < pdev->num_resources; ++i) {

drivers/usb/core/sysfs.c

@@ -73,7 +73,7 @@ set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
 	return (value < 0) ? value : count;
 }
 
-static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR_IGNORE_LOCKDEP(bConfigurationValue, S_IRUGO | S_IWUSR,
 		show_bConfigurationValue, set_bConfigurationValue);
 
 /* String fields */
@@ -595,7 +595,7 @@ static ssize_t usb_dev_authorized_store(struct device *dev,
 	return result < 0? result : size;
 }
 
-static DEVICE_ATTR(authorized, 0644,
+static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, 0644,
 	    usb_dev_authorized_show, usb_dev_authorized_store);
 
 /* "Safely remove a device" */
@@ -618,7 +618,7 @@ static ssize_t usb_remove_store(struct device *dev,
 	usb_unlock_device(udev);
 	return rc;
 }
-static DEVICE_ATTR(remove, 0200, NULL, usb_remove_store);
+static DEVICE_ATTR_IGNORE_LOCKDEP(remove, 0200, NULL, usb_remove_store);
 
 
 static struct attribute *dev_attrs[] = {

drivers/w1/slaves/w1_ds2408.c

@@ -332,7 +332,6 @@ static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 		},
 		.size = 1,
 		.read = w1_f29_read_cond_search_mask,
-		.write = 0,
 	},
 	{
 		.attr =	{
@@ -341,7 +340,6 @@ static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 		},
 		.size = 1,
 		.read = w1_f29_read_cond_search_polarity,
-		.write = 0,
 	},
 	{
 		.attr =	{

drivers/w1/w1.c

@@ -1027,7 +1027,7 @@ static int __init w1_init(void)
 	retval = driver_register(&w1_slave_driver);
 	if (retval) {
 		printk(KERN_ERR
-			"Failed to register master driver. err=%d.\n",
+			"Failed to register slave driver. err=%d.\n",
 			retval);
 		goto err_out_master_unregister;
 	}

drivers/w1/w1_io.c

@@ -31,6 +31,9 @@
 static int w1_delay_parm = 1;
 module_param_named(delay_coef, w1_delay_parm, int, 0);
 
+static int w1_disable_irqs = 0;
+module_param_named(disable_irqs, w1_disable_irqs, int, 0);
+
 static u8 w1_crc8_table[] = {
 	0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,
 	157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,
@@ -79,6 +82,10 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit)
  */
 static void w1_write_bit(struct w1_master *dev, int bit)
 {
+	unsigned long flags = 0;
+
+	if(w1_disable_irqs) local_irq_save(flags);
+
 	if (bit) {
 		dev->bus_master->write_bit(dev->bus_master->data, 0);
 		w1_delay(6);
@@ -90,6 +97,8 @@ static void w1_write_bit(struct w1_master *dev, int bit)
 		dev->bus_master->write_bit(dev->bus_master->data, 1);
 		w1_delay(10);
 	}
+
+	if(w1_disable_irqs) local_irq_restore(flags);
 }
 
 /**
@@ -158,7 +167,7 @@ EXPORT_SYMBOL_GPL(w1_write_8);
 static u8 w1_read_bit(struct w1_master *dev)
 {
 	int result;
-	unsigned long flags;
+	unsigned long flags = 0;
 
 	/* sample timing is critical here */
 	local_irq_save(flags);
@@ -318,6 +327,9 @@ EXPORT_SYMBOL_GPL(w1_read_block);
 int w1_reset_bus(struct w1_master *dev)
 {
 	int result;
+	unsigned long flags = 0;
+
+	if(w1_disable_irqs) local_irq_save(flags);
 
 	if (dev->bus_master->reset_bus)
 		result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1;
@@ -330,19 +342,21 @@ int w1_reset_bus(struct w1_master *dev)
 		 * cpu for such a short amount of time AND get it back in
 		 * the maximum amount of time.
 		 */
-		w1_delay(480);
+		w1_delay(500);
 		dev->bus_master->write_bit(dev->bus_master->data, 1);
 		w1_delay(70);
 
 		result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1;
-		/* minmum 70 (above) + 410 = 480 us
+		/* minmum 70 (above) + 430 = 500 us
 		 * There aren't any timing requirements between a reset and
 		 * the following transactions.  Sleeping is safe here.
 		 */
-		/* w1_delay(410); min required time */
+		/* w1_delay(430); min required time */
 		msleep(1);
 	}
 
+	if(w1_disable_irqs) local_irq_restore(flags);
+
 	return result;
 }
 EXPORT_SYMBOL_GPL(w1_reset_bus);

include/linux/hyperv.h

@@ -1062,8 +1062,10 @@ struct hyperv_service_callback {
 	void (*callback) (void *context);
 };
 
+#define MAX_SRV_VER	0x7ffffff
 extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *,
-				      struct icmsg_negotiate *, u8 *);
+					struct icmsg_negotiate *, u8 *, int,
+					int);
 
 int hv_kvp_init(struct hv_util_service *);
 void hv_kvp_deinit(void);