Commit 5d61a217 authored by Scott Wood's avatar Scott Wood Committed by Benjamin Herrenschmidt

powerpc/nohash: Split __early_init_mmu() into boot and secondary

__early_init_mmu() does some things that are really only needed by the
boot cpu.  On FSL booke, This includes calling
memblock_enforce_memory_limit(), which is labelled __init.  Secondary
cpu init code can't be __init as that would break CPU hotplug.

While it's probably a bug that memblock_enforce_memory_limit() isn't
__init_memblock instead, there's no reason why we should be doing this
stuff for secondary cpus in the first place.
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 58d08e3b
......@@ -581,42 +581,10 @@ static void setup_mmu_htw(void)
/*
* Early initialization of the MMU TLB code
*/
static void __early_init_mmu(int boot_cpu)
static void early_init_this_mmu(void)
{
unsigned int mas4;
/* XXX This will have to be decided at runtime, but right
* now our boot and TLB miss code hard wires it. Ideally
* we should find out a suitable page size and patch the
* TLB miss code (either that or use the PACA to store
* the value we want)
*/
mmu_linear_psize = MMU_PAGE_1G;
/* XXX This should be decided at runtime based on supported
* page sizes in the TLB, but for now let's assume 16M is
* always there and a good fit (which it probably is)
*
* Freescale booke only supports 4K pages in TLB0, so use that.
*/
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
mmu_vmemmap_psize = MMU_PAGE_4K;
else
mmu_vmemmap_psize = MMU_PAGE_16M;
/* XXX This code only checks for TLB 0 capabilities and doesn't
* check what page size combos are supported by the HW. It
* also doesn't handle the case where a separate array holds
* the IND entries from the array loaded by the PT.
*/
if (boot_cpu) {
/* Look for supported page sizes */
setup_page_sizes();
/* Look for HW tablewalk support */
setup_mmu_htw();
}
/* Set MAS4 based on page table setting */
mas4 = 0x4 << MAS4_WIMGED_SHIFT;
......@@ -650,11 +618,6 @@ static void __early_init_mmu(int boot_cpu)
}
mtspr(SPRN_MAS4, mas4);
/* Set the global containing the top of the linear mapping
* for use by the TLB miss code
*/
linear_map_top = memblock_end_of_DRAM();
#ifdef CONFIG_PPC_FSL_BOOK3E
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
unsigned int num_cams;
......@@ -662,10 +625,49 @@ static void __early_init_mmu(int boot_cpu)
/* use a quarter of the TLBCAM for bolted linear map */
num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
linear_map_top = map_mem_in_cams(linear_map_top, num_cams);
}
#endif
/* limit memory so we dont have linear faults */
memblock_enforce_memory_limit(linear_map_top);
/* A sync won't hurt us after mucking around with
* the MMU configuration
*/
mb();
}
static void __init early_init_mmu_global(void)
{
/* XXX This will have to be decided at runtime, but right
* now our boot and TLB miss code hard wires it. Ideally
* we should find out a suitable page size and patch the
* TLB miss code (either that or use the PACA to store
* the value we want)
*/
mmu_linear_psize = MMU_PAGE_1G;
/* XXX This should be decided at runtime based on supported
* page sizes in the TLB, but for now let's assume 16M is
* always there and a good fit (which it probably is)
*
* Freescale booke only supports 4K pages in TLB0, so use that.
*/
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
mmu_vmemmap_psize = MMU_PAGE_4K;
else
mmu_vmemmap_psize = MMU_PAGE_16M;
/* XXX This code only checks for TLB 0 capabilities and doesn't
* check what page size combos are supported by the HW. It
* also doesn't handle the case where a separate array holds
* the IND entries from the array loaded by the PT.
*/
/* Look for supported page sizes */
setup_page_sizes();
/* Look for HW tablewalk support */
setup_mmu_htw();
#ifdef CONFIG_PPC_FSL_BOOK3E
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
if (book3e_htw_mode == PPC_HTW_NONE) {
extlb_level_exc = EX_TLB_SIZE;
patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
......@@ -675,22 +677,41 @@ static void __early_init_mmu(int boot_cpu)
}
#endif
/* A sync won't hurt us after mucking around with
* the MMU configuration
/* Set the global containing the top of the linear mapping
* for use by the TLB miss code
*/
mb();
linear_map_top = memblock_end_of_DRAM();
}
static void __init early_mmu_set_memory_limit(void)
{
#ifdef CONFIG_PPC_FSL_BOOK3E
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
/*
* Limit memory so we dont have linear faults.
* Unlike memblock_set_current_limit, which limits
* memory available during early boot, this permanently
* reduces the memory available to Linux. We need to
* do this because highmem is not supported on 64-bit.
*/
memblock_enforce_memory_limit(linear_map_top);
}
#endif
memblock_set_current_limit(linear_map_top);
}
/* boot cpu only */
void __init early_init_mmu(void)
{
__early_init_mmu(1);
early_init_mmu_global();
early_init_this_mmu();
early_mmu_set_memory_limit();
}
void early_init_mmu_secondary(void)
{
__early_init_mmu(0);
early_init_this_mmu();
}
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment