ASoC: wm8996: replace codec to component

Now we can replace Codec to Component. Let's do it.

Note:
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 1	->	.idle_bias_on = 0
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/wm8996.h

@@ -22,9 +22,9 @@
 #define WM8996_FLL_DACLRCLK1  3
 #define WM8996_FLL_BCLK1      4
 
-typedef void (*wm8996_polarity_fn)(struct snd_soc_codec *codec, int polarity);
+typedef void (*wm8996_polarity_fn)(struct snd_soc_component *component, int polarity);
 
-int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
+int wm8996_detect(struct snd_soc_component *component, struct snd_soc_jack *jack,
 		  wm8996_polarity_fn polarity_cb);
 
 /*

sound/soc/samsung/speyside.c

@@ -124,14 +124,14 @@ static int speyside_get_micbias(struct snd_soc_dapm_widget *source,
 	return 0;
 }
 
-static void speyside_set_polarity(struct snd_soc_codec *codec,
+static void speyside_set_polarity(struct snd_soc_component *component,
 				  int polarity)
 {
 	speyside_jack_polarity = !polarity;
 	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
 
 	/* Re-run DAPM to make sure we're using the correct mic bias */
-	snd_soc_dapm_sync(snd_soc_codec_get_dapm(codec));
+	snd_soc_dapm_sync(snd_soc_component_get_dapm(component));
 }
 
 static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)
@@ -149,7 +149,7 @@ static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)
 static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dai *dai = rtd->codec_dai;
-	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_component *component = dai->component;
 	int ret;
 
 	ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0);
@@ -168,7 +168,7 @@ static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
 	if (ret)
 		return ret;
 
-	wm8996_detect(codec, &speyside_headset, speyside_set_polarity);
+	wm8996_detect(component, &speyside_headset, speyside_set_polarity);
 
 	return 0;
 }
@@ -232,10 +232,8 @@ static struct snd_soc_dai_link speyside_dai[] = {
 
 static int speyside_wm9081_init(struct snd_soc_component *component)
 {
-	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
-
 	/* At any time the WM9081 is active it will have this clock */
-	return snd_soc_codec_set_sysclk(codec, WM9081_SYSCLK_MCLK, 0,
+	return snd_soc_component_set_sysclk(component, WM9081_SYSCLK_MCLK, 0,
 					MCLK_AUDIO_RATE, 0);
 }