Commit 5d67f2e8 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Just noticed I hadn't send these out, nothing majorly urgent, I know
  AMD guys have some regression fixes coming soon.

  This contains:
   2 nouveau fixes so it loads on the retina MBP systems properly,
   2 vmwgfx fixes to load the driver earlier, and allow distros config it
   1 error->debug fix in ast
  and Keith was playing with 32-on-64 and decided we may as well stick
  the compat ioctl in all the drivers.  It fixes udl for him."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot
  drm/vmwgfx: allow a kconfig option to choose if fbcon is enabled
  drm: use drm_compat_ioctl for 32-bit apps
  drm/ast: drop debug level on error printk
  drm/nv50-/gpio: initialise to vbios defaults during init
  drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
parents 55d512e2 c4903429
......@@ -193,6 +193,9 @@ static const struct file_operations ast_fops = {
.mmap = ast_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.read = drm_read,
};
......
......@@ -841,7 +841,7 @@ int ast_cursor_init(struct drm_device *dev)
ast->cursor_cache = obj;
ast->cursor_cache_gpu_addr = gpu_addr;
DRM_ERROR("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
DRM_DEBUG_KMS("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
return 0;
fail:
return ret;
......
......@@ -74,6 +74,9 @@ static const struct file_operations cirrus_driver_fops = {
.unlocked_ioctl = drm_ioctl,
.mmap = cirrus_mmap,
.poll = drm_poll,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.fasync = drm_fasync,
};
static struct drm_driver driver = {
......
......@@ -241,6 +241,9 @@ static const struct file_operations exynos_drm_driver_fops = {
.poll = drm_poll,
.read = drm_read,
.unlocked_ioctl = drm_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.release = drm_release,
};
......
......@@ -115,6 +115,9 @@ static const struct file_operations i810_buffer_fops = {
.unlocked_ioctl = drm_ioctl,
.mmap = i810_mmap_buffers,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.llseek = noop_llseek,
};
......
......@@ -51,6 +51,9 @@ static const struct file_operations i810_driver_fops = {
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.llseek = noop_llseek,
};
......
......@@ -84,6 +84,9 @@ static const struct file_operations mgag200_driver_fops = {
.mmap = mgag200_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.read = drm_read,
};
......
......@@ -115,6 +115,9 @@ nv50_gpio_init(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
/* initialise gpios and routing to vbios defaults */
nouveau_gpio_reset(dev);
/* disable, and ack any pending gpio interrupts */
nv_wr32(dev, 0xe050, 0x00000000);
nv_wr32(dev, 0xe054, 0xffffffff);
......
......@@ -1510,10 +1510,10 @@ nvd0_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *umode,
case OUTPUT_DP:
if (nv_connector->base.display_info.bpc == 6) {
nv_encoder->dp.datarate = mode->clock * 18 / 8;
syncs |= 0x00000140;
syncs |= 0x00000002 << 6;
} else {
nv_encoder->dp.datarate = mode->clock * 24 / 8;
syncs |= 0x00000180;
syncs |= 0x00000005 << 6;
}
if (nv_encoder->dcb->sorconf.link & 1)
......
......@@ -43,6 +43,9 @@ static const struct file_operations savage_driver_fops = {
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.llseek = noop_llseek,
};
......
......@@ -74,6 +74,9 @@ static const struct file_operations sis_driver_fops = {
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.llseek = noop_llseek,
};
......
......@@ -49,6 +49,9 @@ static const struct file_operations tdfx_driver_fops = {
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.llseek = noop_llseek,
};
......
......@@ -66,6 +66,9 @@ static const struct file_operations udl_driver_fops = {
.unlocked_ioctl = drm_ioctl,
.release = drm_release,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.llseek = noop_llseek,
};
......
......@@ -65,6 +65,9 @@ static const struct file_operations via_driver_fops = {
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.llseek = noop_llseek,
};
......
......@@ -12,3 +12,11 @@ config DRM_VMWGFX
This is a KMS enabled DRM driver for the VMware SVGA2
virtual hardware.
The compiled module will be called "vmwgfx.ko".
config DRM_VMWGFX_FBCON
depends on DRM_VMWGFX
bool "Enable framebuffer console under vmwgfx by default"
help
Choose this option if you are shipping a new vmwgfx
userspace driver that supports using the kernel driver.
......@@ -182,8 +182,9 @@ static struct pci_device_id vmw_pci_id_list[] = {
{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
{0, 0, 0}
};
MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
static int enable_fbdev;
static int enable_fbdev = IS_ENABLED(CONFIG_DRM_VMWGFX_FBCON);
static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
static void vmw_master_init(struct vmw_master *);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment