Merge tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa

Pull xtensa fixes from Max Filippov:

 - fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage

 - fix reset handler for xtfpga boards

* tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: xtfpga: Try software restart before simulating CPU reset
  xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
  xtensa: call irqchip_init only when CONFIG_USE_OF is selected
  xtensa: use CONFIG_USE_OF instead of CONFIG_OF

arch/xtensa/include/asm/kmem_layout.h

@@ -78,7 +78,7 @@
 #endif
 #define XCHAL_KIO_SIZE			0x10000000
 
-#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF)
+#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_USE_OF)
 #define XCHAL_KIO_PADDR			xtensa_get_kio_paddr()
 #ifndef __ASSEMBLY__
 extern unsigned long xtensa_kio_paddr;

arch/xtensa/kernel/irq.c

@@ -143,7 +143,7 @@ unsigned xtensa_get_ext_irq_no(unsigned irq)
 
 void __init init_IRQ(void)
 {
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 	irqchip_init();
 #else
 #ifdef CONFIG_HAVE_SMP

arch/xtensa/kernel/setup.c

@@ -63,7 +63,7 @@ extern unsigned long initrd_end;
 extern int initrd_below_start_ok;
 #endif
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 void *dtb_start = __dtb_start;
 #endif
 
@@ -125,7 +125,7 @@ __tagtable(BP_TAG_INITRD, parse_tag_initrd);
 
 #endif /* CONFIG_BLK_DEV_INITRD */
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 
 static int __init parse_tag_fdt(const bp_tag_t *tag)
 {
@@ -135,7 +135,7 @@ static int __init parse_tag_fdt(const bp_tag_t *tag)
 
 __tagtable(BP_TAG_FDT, parse_tag_fdt);
 
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
 
 static int __init parse_tag_cmdline(const bp_tag_t* tag)
 {
@@ -183,7 +183,7 @@ static int __init parse_bootparam(const bp_tag_t *tag)
 }
 #endif
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 
 #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
@@ -232,7 +232,7 @@ void __init early_init_devtree(void *params)
 		strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 }
 
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
 
 /*
  * Initialize architecture. (Early stage)
@@ -253,7 +253,7 @@ void __init init_arch(bp_tag_t *bp_start)
 	if (bp_start)
 		parse_bootparam(bp_start);
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 	early_init_devtree(dtb_start);
 #endif
 

arch/xtensa/mm/mmu.c

@@ -101,7 +101,7 @@ void init_mmu(void)
 
 void init_kio(void)
 {
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_USE_OF)
 	/*
 	 * Update the IO area mapping in case xtensa_kio_paddr has changed
 	 */

arch/xtensa/platforms/xtfpga/setup.c

@@ -51,8 +51,12 @@ void platform_power_off(void)
 
 void platform_restart(void)
 {
-	/* Flush and reset the mmu, simulate a processor reset, and
-	 * jump to the reset vector. */
+	/* Try software reset first. */
+	WRITE_ONCE(*(u32 *)XTFPGA_SWRST_VADDR, 0xdead);
+
+	/* If software reset did not work, flush and reset the mmu,
+	 * simulate a processor reset, and jump to the reset vector.
+	 */
 	cpu_reset();
 	/* control never gets here */
 }
@@ -66,7 +70,7 @@ void __init platform_calibrate_ccount(void)
 
 #endif
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 
 static void __init xtfpga_clk_setup(struct device_node *np)
 {
@@ -284,4 +288,4 @@ static int __init xtavnet_init(void)
  */
 arch_initcall(xtavnet_init);
 
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */