Commit 5da1b522 authored by Shengjiu Wang's avatar Shengjiu Wang Committed by Shawn Guo

ARM: dts: imx6sll: Make ssi node name same as other platforms

In imx6sll.dtsi, the ssi node name is different with other
platforms (imx6qdl, imx6sl, imx6sx), but the
sound/soc/fsl/fsl-asoc-card.c machine driver needs to check
ssi node name for audmux configuration, then different ssi
node name causes issue on imx6sll platform.

So we change ssi node name to make all platforms have same
name.
Signed-off-by: default avatarShengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent a6d09440
...@@ -261,7 +261,7 @@ uart2: serial@2024000 { ...@@ -261,7 +261,7 @@ uart2: serial@2024000 {
status = "disabled"; status = "disabled";
}; };
ssi1: ssi-controller@2028000 { ssi1: ssi@2028000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02028000 0x4000>; reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
...@@ -274,7 +274,7 @@ ssi1: ssi-controller@2028000 { ...@@ -274,7 +274,7 @@ ssi1: ssi-controller@2028000 {
status = "disabled"; status = "disabled";
}; };
ssi2: ssi-controller@202c000 { ssi2: ssi@202c000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>; reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
...@@ -287,7 +287,7 @@ ssi2: ssi-controller@202c000 { ...@@ -287,7 +287,7 @@ ssi2: ssi-controller@202c000 {
status = "disabled"; status = "disabled";
}; };
ssi3: ssi-controller@2030000 { ssi3: ssi@2030000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02030000 0x4000>; reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment