Commit 5e04ae85 authored by Christophe Leroy's avatar Christophe Leroy Committed by Michael Ellerman

powerpc/mm/32s: add setibat() clearibat() and update_bats()

setibat() and clearibat() allows to manipulate IBATs independently
of DBATs.

update_bats() allows to update bats after init. This is done
with MMU off.
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 166d97d9
......@@ -92,6 +92,8 @@ typedef struct {
unsigned long vdso_base;
} mm_context_t;
void update_bats(void);
/* patch sites */
extern s32 patch__hash_page_A0, patch__hash_page_A1, patch__hash_page_A2;
extern s32 patch__hash_page_B, patch__hash_page_C;
......
......@@ -1096,6 +1096,41 @@ BEGIN_MMU_FTR_SECTION
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
_ENTRY(update_bats)
lis r4, 1f@h
ori r4, r4, 1f@l
tophys(r4, r4)
mfmsr r6
mflr r7
li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR)
rlwinm r0, r6, 0, ~MSR_RI
rlwinm r0, r0, 0, ~MSR_EE
mtmsr r0
mtspr SPRN_SRR0, r4
mtspr SPRN_SRR1, r3
SYNC
RFI
1: bl clear_bats
lis r3, BATS@ha
addi r3, r3, BATS@l
tophys(r3, r3)
LOAD_BAT(0, r3, r4, r5)
LOAD_BAT(1, r3, r4, r5)
LOAD_BAT(2, r3, r4, r5)
LOAD_BAT(3, r3, r4, r5)
BEGIN_MMU_FTR_SECTION
LOAD_BAT(4, r3, r4, r5)
LOAD_BAT(5, r3, r4, r5)
LOAD_BAT(6, r3, r4, r5)
LOAD_BAT(7, r3, r4, r5)
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI)
mtmsr r3
mtspr SPRN_SRR0, r7
mtspr SPRN_SRR1, r6
SYNC
RFI
flush_tlbs:
lis r10, 0x40
1: addic. r10, r10, -0x1000
......
......@@ -106,6 +106,38 @@ static unsigned int block_size(unsigned long base, unsigned long top)
return min3(max_size, 1U << base_shift, 1U << block_shift);
}
/*
* Set up one of the IBAT (block address translation) register pairs.
* The parameters are not checked; in particular size must be a power
* of 2 between 128k and 256M.
* Only for 603+ ...
*/
static void setibat(int index, unsigned long virt, phys_addr_t phys,
unsigned int size, pgprot_t prot)
{
unsigned int bl = (size >> 17) - 1;
int wimgxpp;
struct ppc_bat *bat = BATS[index];
unsigned long flags = pgprot_val(prot);
if (!cpu_has_feature(CPU_FTR_NEED_COHERENT))
flags &= ~_PAGE_COHERENT;
wimgxpp = (flags & _PAGE_COHERENT) | (_PAGE_EXEC ? BPP_RX : BPP_XX);
bat[0].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
bat[0].batl = BAT_PHYS_ADDR(phys) | wimgxpp;
if (flags & _PAGE_USER)
bat[0].batu |= 1; /* Vp = 1 */
}
static void clearibat(int index)
{
struct ppc_bat *bat = BATS[index];
bat[0].batu = 0;
bat[0].batl = 0;
}
unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
{
int idx;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment