Commit 5e1f9aca authored by Marek Vasut's avatar Marek Vasut Committed by Jonathan Cameron

iio: mxs: Add MX23 support into the IIO driver

This patch adds support for i.MX23 into the LRADC driver. The LRADC
block on MX23 is not much different from the one on MX28, thus this
is only a few changes fixing the parts that are specific to MX23.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 232827fb
......@@ -119,12 +119,12 @@ config LPC32XX_ADC
via sysfs.
config MXS_LRADC
tristate "Freescale i.MX28 LRADC"
tristate "Freescale i.MX23/i.MX28 LRADC"
depends on ARCH_MXS
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for i.MX28 LRADC convertor
Say yes here to build support for i.MX23/i.MX28 LRADC convertor
built into these chips.
To compile this driver as a module, choose M here: the
......
......@@ -76,7 +76,24 @@
*/
#define LRADC_TS_SAMPLE_AMOUNT 4
static const char * const mxs_lradc_irq_name[] = {
enum mxs_lradc_id {
IMX23_LRADC,
IMX28_LRADC,
};
static const char * const mx23_lradc_irq_names[] = {
"mxs-lradc-touchscreen",
"mxs-lradc-channel0",
"mxs-lradc-channel1",
"mxs-lradc-channel2",
"mxs-lradc-channel3",
"mxs-lradc-channel4",
"mxs-lradc-channel5",
"mxs-lradc-channel6",
"mxs-lradc-channel7",
};
static const char * const mx28_lradc_irq_names[] = {
"mxs-lradc-touchscreen",
"mxs-lradc-thresh0",
"mxs-lradc-thresh1",
......@@ -92,6 +109,22 @@ static const char * const mxs_lradc_irq_name[] = {
"mxs-lradc-button1",
};
struct mxs_lradc_of_config {
const int irq_count;
const char * const *irq_name;
};
static const struct mxs_lradc_of_config const mxs_lradc_of_config[] = {
[IMX23_LRADC] = {
.irq_count = ARRAY_SIZE(mx23_lradc_irq_names),
.irq_name = mx23_lradc_irq_names,
},
[IMX28_LRADC] = {
.irq_count = ARRAY_SIZE(mx28_lradc_irq_names),
.irq_name = mx28_lradc_irq_names,
},
};
enum mxs_lradc_ts {
MXS_LRADC_TOUCHSCREEN_NONE = 0,
MXS_LRADC_TOUCHSCREEN_4WIRE,
......@@ -857,8 +890,19 @@ static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
writel(0, lradc->base + LRADC_DELAY(i));
}
static const struct of_device_id mxs_lradc_dt_ids[] = {
{ .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
{ .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
static int mxs_lradc_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(mxs_lradc_dt_ids, &pdev->dev);
const struct mxs_lradc_of_config *of_cfg =
&mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data];
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct mxs_lradc *lradc;
......@@ -902,7 +946,7 @@ static int mxs_lradc_probe(struct platform_device *pdev)
ts_wires);
/* Grab all IRQ sources */
for (i = 0; i < 13; i++) {
for (i = 0; i < of_cfg->irq_count; i++) {
lradc->irq[i] = platform_get_irq(pdev, i);
if (lradc->irq[i] < 0) {
ret = -EINVAL;
......@@ -911,7 +955,7 @@ static int mxs_lradc_probe(struct platform_device *pdev)
ret = devm_request_irq(dev, lradc->irq[i],
mxs_lradc_handle_irq, 0,
mxs_lradc_irq_name[i], iio);
of_cfg->irq_name[i], iio);
if (ret)
goto err_addr;
}
......@@ -983,12 +1027,6 @@ static int mxs_lradc_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id mxs_lradc_dt_ids[] = {
{ .compatible = "fsl,imx28-lradc", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
static struct platform_driver mxs_lradc_driver = {
.driver = {
.name = DRIVER_NAME,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment