ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK

* Use PC_FLAG_DMA_OK flag instead of PC_FLAG_DMA_RECOMMENDED one.

* Remove no longer used PC_FLAG_DMA_RECOMMENDED flag.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-floppy.c

@@ -630,7 +630,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 	}
 	dma = 0;
 
-	if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
+	if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma)
 		dma = !hwif->dma_ops->dma_setup(drive);
 
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma);
@@ -755,7 +755,7 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
 		pc->flags |= PC_FLAG_WRITING;
 	pc->buf = NULL;
 	pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
-	pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+	pc->flags |= PC_FLAG_DMA_OK;
 }
 
 static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
@@ -769,7 +769,7 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
 		pc->flags |= PC_FLAG_WRITING;
 	pc->buf = rq->data;
 	if (rq->bio)
-		pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+		pc->flags |= PC_FLAG_DMA_OK;
 	/*
 	 * possibly problematic, doesn't look like ide-floppy correctly
 	 * handled scattered requests if dma fails...

drivers/ide/ide-tape.c

@@ -1050,7 +1050,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 		pc->flags &= ~PC_FLAG_DMA_ERROR;
 		ide_dma_off(drive);
 	}
-	if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
+	if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma)
 		dma_ok = !hwif->dma_ops->dma_setup(drive);
 
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
@@ -1138,7 +1138,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape,
 	pc->buf_size = length * tape->blk_size;
 	pc->req_xfer = pc->buf_size;
 	if (pc->req_xfer == tape->buffer_size)
-		pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+		pc->flags |= PC_FLAG_DMA_OK;
 }
 
 static void idetape_create_write_cmd(idetape_tape_t *tape,
@@ -1157,7 +1157,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape,
 	pc->buf_size = length * tape->blk_size;
 	pc->req_xfer = pc->buf_size;
 	if (pc->req_xfer == tape->buffer_size)
-		pc->flags |= PC_FLAG_DMA_RECOMMENDED;
+		pc->flags |= PC_FLAG_DMA_OK;
 }
 
 static ide_startstop_t idetape_do_request(ide_drive_t *drive,

include/linux/ide.h

@@ -602,12 +602,11 @@ enum {
 	PC_FLAG_SUPPRESS_ERROR		= (1 << 1),
 	PC_FLAG_WAIT_FOR_DSC		= (1 << 2),
 	PC_FLAG_DMA_OK			= (1 << 3),
-	PC_FLAG_DMA_RECOMMENDED		= (1 << 4),
-	PC_FLAG_DMA_IN_PROGRESS		= (1 << 5),
-	PC_FLAG_DMA_ERROR		= (1 << 6),
-	PC_FLAG_WRITING			= (1 << 7),
+	PC_FLAG_DMA_IN_PROGRESS		= (1 << 4),
+	PC_FLAG_DMA_ERROR		= (1 << 5),
+	PC_FLAG_WRITING			= (1 << 6),
 	/* command timed out */
-	PC_FLAG_TIMEDOUT		= (1 << 8),
+	PC_FLAG_TIMEDOUT		= (1 << 7),
 };
 
 struct ide_atapi_pc {