Commit 5e97650c authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: amplc_pci230: rename 'thisboard' variables

For aesthetics, rename the 'thisboard' variables to 'board'. That name
is more commonly used for the boardinfo pointer in comedi drivers.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c7f53ea1
......@@ -528,7 +528,7 @@ static const struct comedi_lrange pci230_ao_range = {
static unsigned short pci230_ai_read(struct comedi_device *dev)
{
const struct pci230_board *thisboard = dev->board_ptr;
const struct pci230_board *board = dev->board_ptr;
struct pci230_private *devpriv = dev->private;
unsigned short data;
......@@ -543,21 +543,21 @@ static unsigned short pci230_ai_read(struct comedi_device *dev)
*/
if (devpriv->ai_bipolar)
data ^= 0x8000;
data >>= (16 - thisboard->ai_bits);
data >>= (16 - board->ai_bits);
return data;
}
static unsigned short pci230_ao_mangle_datum(struct comedi_device *dev,
unsigned short datum)
{
const struct pci230_board *thisboard = dev->board_ptr;
const struct pci230_board *board = dev->board_ptr;
struct pci230_private *devpriv = dev->private;
/*
* PCI230 is 12 bit - stored in upper bits of 16 bit register (lower
* four bits reserved for expansion). PCI230+ is also 12 bit AO.
*/
datum <<= (16 - thisboard->ao_bits);
datum <<= (16 - board->ao_bits);
/*
* If a bipolar range was specified, mangle it
* (straight binary->twos complement).
......@@ -877,7 +877,7 @@ static int pci230_ao_check_chanlist(struct comedi_device *dev,
static int pci230_ao_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
const struct pci230_board *thisboard = dev->board_ptr;
const struct pci230_board *board = dev->board_ptr;
struct pci230_private *devpriv = dev->private;
int err = 0;
unsigned int tmp;
......@@ -887,14 +887,14 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
err |= comedi_check_trigger_src(&cmd->start_src, TRIG_INT);
tmp = TRIG_TIMER | TRIG_INT;
if (thisboard->min_hwver > 0 && devpriv->hwver >= 2) {
if (board->min_hwver > 0 && devpriv->hwver >= 2) {
/*
* For PCI230+ hardware version 2 onwards, allow external
* trigger from EXTTRIG/EXTCONVCLK input (PCI230+ pin 25).
*
* FIXME: The permitted scan_begin_src values shouldn't depend
* on devpriv->hwver (the detected card's actual hardware
* version). They should only depend on thisboard->min_hwver
* version). They should only depend on board->min_hwver
* (the static capabilities of the configured card). To fix
* it, a new card model, e.g. "pci230+2" would have to be
* defined with min_hwver set to 2. It doesn't seem worth it
......@@ -1500,7 +1500,7 @@ static int pci230_ai_check_chanlist(struct comedi_device *dev,
static int pci230_ai_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
const struct pci230_board *thisboard = dev->board_ptr;
const struct pci230_board *board = dev->board_ptr;
struct pci230_private *devpriv = dev->private;
int err = 0;
unsigned int tmp;
......@@ -1510,7 +1510,7 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
err |= comedi_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_INT);
tmp = TRIG_FOLLOW | TRIG_TIMER | TRIG_INT;
if (thisboard->have_dio || thisboard->min_hwver > 0) {
if (board->have_dio || board->min_hwver > 0) {
/*
* Unfortunately, we cannot trigger a scan off an external
* source on the PCI260 board, since it uses the PPIC0 (DIO)
......@@ -2364,7 +2364,7 @@ static int pci230_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
const struct pci230_board *thisboard;
const struct pci230_board *board;
struct pci230_private *devpriv;
struct comedi_subdevice *s;
int rc;
......@@ -2381,14 +2381,14 @@ static int pci230_auto_attach(struct comedi_device *dev,
spin_lock_init(&devpriv->ai_stop_spinlock);
spin_lock_init(&devpriv->ao_stop_spinlock);
dev->board_ptr = pci230_find_pci_board(pci_dev);
if (!dev->board_ptr) {
board = pci230_find_pci_board(pci_dev);
if (!board) {
dev_err(dev->class_dev,
"amplc_pci230: BUG! cannot determine board type!\n");
return -EINVAL;
}
thisboard = dev->board_ptr;
dev->board_name = thisboard->name;
dev->board_ptr = board;
dev->board_name = board->name;
rc = comedi_pci_enable(dev);
if (rc)
......@@ -2414,15 +2414,15 @@ static int pci230_auto_attach(struct comedi_device *dev,
unsigned short extfunc = 0;
devpriv->hwver = inw(devpriv->daqio + PCI230P_HWVER);
if (devpriv->hwver < thisboard->min_hwver) {
if (devpriv->hwver < board->min_hwver) {
dev_err(dev->class_dev,
"%s - bad hardware version - got %u, need %u\n",
dev->board_name, devpriv->hwver,
thisboard->min_hwver);
board->min_hwver);
return -EIO;
}
if (devpriv->hwver > 0) {
if (!thisboard->have_dio) {
if (!board->have_dio) {
/*
* No DIO ports. Route counters' external gates
* to the EXTTRIG signal (PCI260+ pin 17).
......@@ -2432,7 +2432,7 @@ static int pci230_auto_attach(struct comedi_device *dev,
*/
extfunc |= PCI230P_EXTFUNC_GAT_EXTTRIG;
}
if (thisboard->ao_bits && devpriv->hwver >= 2) {
if (board->ao_bits && devpriv->hwver >= 2) {
/* Enable DAC FIFO functionality. */
extfunc |= PCI230P2_EXTFUNC_DACFIFO;
}
......@@ -2484,7 +2484,7 @@ static int pci230_auto_attach(struct comedi_device *dev,
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_DIFF | SDF_GROUND;
s->n_chan = 16;
s->maxdata = (1 << thisboard->ai_bits) - 1;
s->maxdata = (1 << board->ai_bits) - 1;
s->range_table = &pci230_ai_range;
s->insn_read = pci230_ai_insn_read;
s->len_chanlist = 256; /* but there are restrictions. */
......@@ -2498,11 +2498,11 @@ static int pci230_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[1];
/* analog output subdevice */
if (thisboard->ao_bits) {
if (board->ao_bits) {
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
s->n_chan = 2;
s->maxdata = (1 << thisboard->ao_bits) - 1;
s->maxdata = (1 << board->ao_bits) - 1;
s->range_table = &pci230_ao_range;
s->insn_write = pci230_ao_insn_write;
s->len_chanlist = 2;
......@@ -2523,7 +2523,7 @@ static int pci230_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[2];
/* digital i/o subdevice */
if (thisboard->have_dio) {
if (board->have_dio) {
rc = subdev_8255_init(dev, s, NULL, PCI230_PPI_X_BASE);
if (rc)
return rc;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment