Commit 5e999fb4 authored by Paul Greenwalt's avatar Paul Greenwalt Committed by Jeff Kirsher

ixgbe: Remove MAC X550EM_X 1Gbase-t led_[on|off] support

Since FW configures the PHY and MAC X550EM_X has no
PHY access, led_[on|off] is not supported with the 1Gbase-t design.

Removed MAC X550EM_X 1Gbase-t led_[on|off] support by setting
function pointers to NULL and added NULL pointer checks. Also set
init_led_link_act to NULL and added NULL pointer check.
Signed-off-by: default avatarPaul Greenwalt <paul.greenwalt@intel.com>
Tested-by: default avatarKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent b09457e7
......@@ -395,7 +395,8 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
}
/* Initialize the LED link active for LED blink support */
hw->mac.ops.init_led_link_act(hw);
if (hw->mac.ops.init_led_link_act)
hw->mac.ops.init_led_link_act(hw);
return status;
}
......
......@@ -2254,6 +2254,9 @@ static int ixgbe_set_phys_id(struct net_device *netdev,
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
if (!hw->mac.ops.led_on || !hw->mac.ops.led_off)
return -EOPNOTSUPP;
switch (state) {
case ETHTOOL_ID_ACTIVE:
adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
......
......@@ -3206,6 +3206,7 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
phy->ops.setup_link = NULL;
phy->ops.read_reg = NULL;
phy->ops.write_reg = NULL;
phy->ops.reset = NULL;
break;
default:
break;
......@@ -3819,6 +3820,28 @@ static const struct ixgbe_mac_operations mac_ops_X550EM_x = {
.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550,
};
static const struct ixgbe_mac_operations mac_ops_X550EM_x_fw = {
X550_COMMON_MAC
.led_on = NULL,
.led_off = NULL,
.init_led_link_act = NULL,
.reset_hw = &ixgbe_reset_hw_X550em,
.get_media_type = &ixgbe_get_media_type_X550em,
.get_san_mac_addr = NULL,
.get_wwn_prefix = NULL,
.setup_link = &ixgbe_setup_mac_link_X540,
.get_link_capabilities = &ixgbe_get_link_capabilities_X550em,
.get_bus_info = &ixgbe_get_bus_info_X550em,
.setup_sfp = ixgbe_setup_sfp_modules_X550em,
.acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em,
.release_swfw_sync = &ixgbe_release_swfw_sync_X550em,
.init_swfw_sync = &ixgbe_init_swfw_sync_X540,
.setup_fc = NULL,
.fc_autoneg = ixgbe_fc_autoneg,
.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550,
.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550,
};
static struct ixgbe_mac_operations mac_ops_x550em_a = {
X550_COMMON_MAC
.led_on = ixgbe_led_on_t_x550em,
......@@ -3986,7 +4009,7 @@ const struct ixgbe_info ixgbe_X550EM_x_info = {
const struct ixgbe_info ixgbe_x550em_x_fw_info = {
.mac = ixgbe_mac_X550EM_x,
.get_invariants = ixgbe_get_invariants_X550_x_fw,
.mac_ops = &mac_ops_X550EM_x,
.mac_ops = &mac_ops_X550EM_x_fw,
.eeprom_ops = &eeprom_ops_X550EM_x,
.phy_ops = &phy_ops_x550em_x_fw,
.mbx_ops = &mbx_ops_generic,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment