Commit 5e9a3d70 authored by Kever Yang's avatar Kever Yang Committed by Mike Turquette

clk: rockchip: add some needed clock binding id for rk3288

This patch add some clock binding id for different modules
that under development and going to send upstream.
Signed-off-by: default avatarKever Yang <kever.yang@rock-chips.com>
Reviewed-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent d1a559a1
......@@ -61,6 +61,15 @@
#define SCLK_LCDC_PWM1 101
#define SCLK_MAC_RX 102
#define SCLK_MAC_TX 103
#define SCLK_EDP_24M 104
#define SCLK_EDP 105
#define SCLK_RGA 106
#define SCLK_ISP 107
#define SCLK_ISP_JPE 108
#define SCLK_HDMI_HDCP 109
#define SCLK_HDMI_CEC 110
#define SCLK_HEVC_CABAC 111
#define SCLK_HEVC_CORE 112
#define DCLK_VOP0 190
#define DCLK_VOP1 191
......@@ -75,6 +84,16 @@
#define ACLK_VOP1 198
#define ACLK_CRYPTO 199
#define ACLK_RGA 200
#define ACLK_RGA_NIU 201
#define ACLK_IEP 202
#define ACLK_VIO0_NIU 203
#define ACLK_VIP 204
#define ACLK_ISP 205
#define ACLK_VIO1_NIU 206
#define ACLK_HEVC 207
#define ACLK_VCODEC 208
#define ACLK_CPU 209
#define ACLK_PERI 210
/* pclk gates */
#define PCLK_GPIO0 320
......@@ -112,6 +131,15 @@
#define PCLK_PS2C 352
#define PCLK_TIMER 353
#define PCLK_TZPC 354
#define PCLK_EDP_CTRL 355
#define PCLK_MIPI_DSI0 356
#define PCLK_MIPI_DSI1 357
#define PCLK_MIPI_CSI 358
#define PCLK_LVDS_PHY 359
#define PCLK_HDMI_CTRL 360
#define PCLK_VIO2_H2P 361
#define PCLK_CPU 362
#define PCLK_PERI 363
/* hclk gates */
#define HCLK_GPS 448
......@@ -137,8 +165,16 @@
#define HCLK_IEP 468
#define HCLK_ISP 469
#define HCLK_RGA 470
#define HCLK_VIO_AHB_ARBI 471
#define HCLK_VIO_NIU 472
#define HCLK_VIP 473
#define HCLK_VIO2_H2P 474
#define HCLK_HEVC 475
#define HCLK_VCODEC 476
#define HCLK_CPU 477
#define HCLK_PERI 478
#define CLK_NR_CLKS (HCLK_RGA + 1)
#define CLK_NR_CLKS (HCLK_PERI + 1)
/* soft-reset indices */
#define SRST_CORE0 0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment