Input: bfin_rotary - move pin lists into into platform data

Newer Blackfin boards use pinctrl API to manage pins and the legacy
peripherial lists are not useful on them. Let's move pin lists into
platform data so older boards can still use them and newer boards can use
the modern API.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

arch/blackfin/mach-bf527/boards/ad7160eval.c

@@ -668,6 +668,13 @@ static struct platform_device bfin_sport1_uart_device = {
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 #include <linux/platform_data/bfin_rotary.h>
 
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
+
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
 	/*.rotary_down_key   = KEY_DOWN,*/
@@ -676,6 +683,7 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 	.debounce	   = 10,	/* 0..17 */
 	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
 	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
 };
 
 static struct resource bfin_rotary_resources[] = {

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -1094,6 +1094,13 @@ static struct platform_device bfin_device_gpiokeys = {
 #if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 #include <linux/platform_data/bfin_rotary.h>
 
+static const u16 per_cnt[] = {
+	P_CNT_CUD,
+	P_CNT_CDG,
+	P_CNT_CZM,
+	0
+};
+
 static struct bfin_rotary_platform_data bfin_rotary_data = {
 	/*.rotary_up_key     = KEY_UP,*/
 	/*.rotary_down_key   = KEY_DOWN,*/
@@ -1102,6 +1109,7 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
 	.debounce	   = 10,	/* 0..17 */
 	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
 	.pm_wakeup	   = 1,
+	.pin_list	   = per_cnt,
 };
 
 static struct resource bfin_rotary_resources[] = {

drivers/input/misc/bfin_rotary.c

@@ -16,13 +16,6 @@
 
 #include <asm/portmux.h>
 
-static const u16 per_cnt[] = {
-	P_CNT_CUD,
-	P_CNT_CDG,
-	P_CNT_CZM,
-	0
-};
-
 struct bfin_rot {
 	struct input_dev *input;
 	int irq;
@@ -90,7 +83,8 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 
 static int bfin_rotary_probe(struct platform_device *pdev)
 {
-	struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	const struct bfin_rotary_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
 	struct bfin_rot *rotary;
 	struct input_dev *input;
 	int error;
@@ -101,10 +95,13 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	error = peripheral_request_list(per_cnt, dev_name(&pdev->dev));
-	if (error) {
-		dev_err(&pdev->dev, "requesting peripherals failed\n");
-		return error;
+	if (pdata->pin_list) {
+		error = peripheral_request_list(pdata->pin_list,
+						dev_name(&pdev->dev));
+		if (error) {
+			dev_err(&pdev->dev, "requesting peripherals failed\n");
+			return error;
+		}
 	}
 
 	rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL);
@@ -189,13 +186,16 @@ static int bfin_rotary_probe(struct platform_device *pdev)
 out1:
 	input_free_device(input);
 	kfree(rotary);
-	peripheral_free_list(per_cnt);
+	if (pdata->pin_list)
+		peripheral_free_list(pdata->pin_list);
 
 	return error;
 }
 
 static int bfin_rotary_remove(struct platform_device *pdev)
 {
+	const struct bfin_rotary_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
 	struct bfin_rot *rotary = platform_get_drvdata(pdev);
 
 	bfin_write_CNT_CONFIG(0);
@@ -203,7 +203,9 @@ static int bfin_rotary_remove(struct platform_device *pdev)
 
 	free_irq(rotary->irq, rotary);
 	input_unregister_device(rotary->input);
-	peripheral_free_list(per_cnt);
+
+	if (pdata->pin_list)
+		peripheral_free_list(pdata->pin_list);
 
 	kfree(rotary);
 

include/linux/platform_data/bfin_rotary.h

@@ -40,6 +40,7 @@ struct bfin_rotary_platform_data {
 	unsigned short debounce;	/* 0..17 */
 	unsigned short mode;
 	unsigned short pm_wakeup;
+	unsigned short *pin_list;
 };
 
 /* CNT_CONFIG bitmasks */