Commit 5f3ae016 authored by Marlon Rac Cambasis's avatar Marlon Rac Cambasis Committed by Rob Herring

Docs: Fixing spelling errors in Documentation/devicetree/bindings/

Revised patch fixing six spelling errors within
Documentation/devicetree/bindings/. "specfied" replaced with "specified"
in all three files modified. "atleast" seperated into "at least" three
times in samsung-pinctrl.txt. This should remove any confusion that a
reader might have.
Signed-off-by: default avatarMarlon Rac Cambasis <marlonrc08@gmail.com>
Link: https://lore.kernel.org/r/20201007071705.GA11381@marlonpc-debianSigned-off-by: default avatarRob Herring <robh@kernel.org>
parent 12d1f4c3
...@@ -65,7 +65,7 @@ Required Properties: ...@@ -65,7 +65,7 @@ Required Properties:
- Pin mux/config groups as child nodes: The pin mux (selecting pin function - Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented mode) and pin config (pull up/down, driver strength) settings are represented
as child nodes of the pin-controller node. There should be atleast one as child nodes of the pin-controller node. There should be at least one
child node and there is no limit on the count of these child nodes. It is child node and there is no limit on the count of these child nodes. It is
also possible for a child node to consist of several further child nodes also possible for a child node to consist of several further child nodes
to allow grouping multiple pinctrl groups into one. The format of second to allow grouping multiple pinctrl groups into one. The format of second
...@@ -75,7 +75,7 @@ Required Properties: ...@@ -75,7 +75,7 @@ Required Properties:
The child node should contain a list of pin(s) on which a particular pin The child node should contain a list of pin(s) on which a particular pin
function selection or pin configuration (or both) have to applied. This function selection or pin configuration (or both) have to applied. This
list of pins is specified using the property name "samsung,pins". There list of pins is specified using the property name "samsung,pins". There
should be atleast one pin specfied for this property and there is no upper should be at least one pin specified for this property and there is no upper
limit on the count of pins that can be specified. The pins are specified limit on the count of pins that can be specified. The pins are specified
using pin names which are derived from the hardware manual of the SoC. As using pin names which are derived from the hardware manual of the SoC. As
an example, the pins in GPA0 bank of the pin controller can be represented an example, the pins in GPA0 bank of the pin controller can be represented
...@@ -107,7 +107,7 @@ Required Properties: ...@@ -107,7 +107,7 @@ Required Properties:
hardware manual and these values are programmed as-is into the pin hardware manual and these values are programmed as-is into the pin
pull up/down and driver strength register of the pin-controller. pull up/down and driver strength register of the pin-controller.
Note: A child should include atleast a pin function selection property or Note: A child should include at least a pin function selection property or
pin configuration property (one or more) or both. pin configuration property (one or more) or both.
The client nodes that require a particular pin function selection and/or The client nodes that require a particular pin function selection and/or
......
...@@ -9,7 +9,7 @@ Optional property: ...@@ -9,7 +9,7 @@ Optional property:
- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
NPCM7xx contain four software reset that represent numbers 1 to 4. NPCM7xx contain four software reset that represent numbers 1 to 4.
If 'nuvoton,sw-reset-number' is not specfied software reset is disabled. If 'nuvoton,sw-reset-number' is not specified software reset is disabled.
Example: Example:
rstc: rstc@f0801000 { rstc: rstc@f0801000 {
......
...@@ -20,7 +20,7 @@ Optional properties: ...@@ -20,7 +20,7 @@ Optional properties:
This is useful in situations where another watchdog engine on chip is This is useful in situations where another watchdog engine on chip is
to perform the reset. to perform the reset.
If 'aspeed,reset-type=' is not specfied the default is to enable system If 'aspeed,reset-type=' is not specified the default is to enable system
reset. reset.
Reset types: Reset types:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment