Commit 5f41741a authored by Oak Zeng's avatar Oak Zeng Committed by Alex Deucher

Revert "drm/amdgpu: workaround the TMR MC address issue (v2)"

This reverts commit 2f055097.
2f055097 was a driver workaround
when PSP firmware was not ready. Now the PSP fw is ready so we
revert this driver workaround.
Signed-off-by: default avatarOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: default avatarHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 839ede89
......@@ -218,15 +218,6 @@ struct amdgpu_gmc {
*/
u64 fb_start;
u64 fb_end;
/* In the case of use GART table for vmid0 FB access, [fb_start, fb_end]
* will be squeezed to GART aperture. But we have a PSP FW issue to fix
* for now. To temporarily workaround the PSP FW issue, added below two
* variables to remember the original fb_start/end to re-enable FB
* aperture to workaround the PSP FW issue. Will delete it after we
* get a proper PSP FW fix.
*/
u64 fb_start_original;
u64 fb_end_original;
unsigned vram_width;
u64 real_vram_size;
int vram_mtrr;
......
......@@ -414,16 +414,6 @@ static int psp_tmr_init(struct psp_context *psp)
AMDGPU_GEM_DOMAIN_VRAM,
&psp->tmr_bo, &psp->tmr_mc_addr, pptr);
/* workaround the tmr_mc_addr:
* PSP requires an address in FB aperture. Right now driver produce
* tmr_mc_addr in the GART aperture. Convert it back to FB aperture
* for PSP. Will revert it after we get a fix from PSP FW.
*/
if (psp->adev->asic_type == CHIP_ALDEBARAN) {
psp->tmr_mc_addr -= psp->adev->gmc.fb_start;
psp->tmr_mc_addr += psp->adev->gmc.fb_start_original;
}
return ret;
}
......
......@@ -140,21 +140,12 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
* FB aperture and AGP aperture. Disable them.
*/
if (adev->gmc.pdb0_bo) {
if (adev->asic_type == CHIP_ALDEBARAN) {
WREG32_SOC15(GC, 0, mmMC_VM_FB_LOCATION_TOP, adev->gmc.fb_end_original >> 24);
WREG32_SOC15(GC, 0, mmMC_VM_FB_LOCATION_BASE, adev->gmc.fb_start_original >> 24);
WREG32_SOC15(GC, 0, mmMC_VM_AGP_TOP, 0);
WREG32_SOC15(GC, 0, mmMC_VM_AGP_BOT, 0xFFFFFF);
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR, adev->gmc.fb_start_original >> 18);
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, adev->gmc.fb_end_original >> 18);
} else {
WREG32_SOC15(GC, 0, mmMC_VM_FB_LOCATION_TOP, 0);
WREG32_SOC15(GC, 0, mmMC_VM_FB_LOCATION_BASE, 0x00FFFFFF);
WREG32_SOC15(GC, 0, mmMC_VM_AGP_TOP, 0);
WREG32_SOC15(GC, 0, mmMC_VM_AGP_BOT, 0xFFFFFF);
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR, 0x3FFFFFFF);
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, 0);
}
WREG32_SOC15(GC, 0, mmMC_VM_FB_LOCATION_TOP, 0);
WREG32_SOC15(GC, 0, mmMC_VM_FB_LOCATION_BASE, 0x00FFFFFF);
WREG32_SOC15(GC, 0, mmMC_VM_AGP_TOP, 0);
WREG32_SOC15(GC, 0, mmMC_VM_AGP_BOT, 0xFFFFFF);
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR, 0x3FFFFFFF);
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, 0);
}
}
......
......@@ -47,8 +47,6 @@ static u64 mmhub_v1_7_get_fb_location(struct amdgpu_device *adev)
adev->gmc.fb_start = base;
adev->gmc.fb_end = top;
adev->gmc.fb_start_original = base;
adev->gmc.fb_end_original = top;
return base;
}
......@@ -126,10 +124,10 @@ static void mmhub_v1_7_init_system_aperture_regs(struct amdgpu_device *adev)
if (adev->gmc.pdb0_bo) {
WREG32_SOC15(MMHUB, 0, regMC_VM_AGP_BOT, 0xFFFFFF);
WREG32_SOC15(MMHUB, 0, regMC_VM_AGP_TOP, 0);
WREG32_SOC15(MMHUB, 0, regMC_VM_FB_LOCATION_TOP, adev->gmc.fb_end_original >> 24);
WREG32_SOC15(MMHUB, 0, regMC_VM_FB_LOCATION_BASE, adev->gmc.fb_start_original >> 24);
WREG32_SOC15(MMHUB, 0, regMC_VM_SYSTEM_APERTURE_LOW_ADDR, adev->gmc.fb_start_original >> 18);
WREG32_SOC15(MMHUB, 0, regMC_VM_SYSTEM_APERTURE_HIGH_ADDR, adev->gmc.fb_end_original >> 18);
WREG32_SOC15(MMHUB, 0, regMC_VM_FB_LOCATION_TOP, 0);
WREG32_SOC15(MMHUB, 0, regMC_VM_FB_LOCATION_BASE, 0x00FFFFFF);
WREG32_SOC15(MMHUB, 0, regMC_VM_SYSTEM_APERTURE_LOW_ADDR, 0x3FFFFFFF);
WREG32_SOC15(MMHUB, 0, regMC_VM_SYSTEM_APERTURE_HIGH_ADDR, 0);
}
if (amdgpu_sriov_vf(adev))
return;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment