Commit 5f9e8c1f authored by Maxime Chevallier's avatar Maxime Chevallier Committed by Greg Kroah-Hartman

ethtool: Check for vlan etype or vlan tci when parsing flow_rule

[ Upstream commit b73484b2 ]

When parsing an ethtool flow spec to build a flow_rule, the code checks
if both the vlan etype and the vlan tci are specified by the user to add
a FLOW_DISSECTOR_KEY_VLAN match.

However, when the user only specified a vlan etype or a vlan tci, this
check silently ignores these parameters.

For example, the following rule :

ethtool -N eth0 flow-type udp4 vlan 0x0010 action -1 loc 0

will result in no error being issued, but the equivalent rule will be
created and passed to the NIC driver :

ethtool -N eth0 flow-type udp4 action -1 loc 0

In the end, neither the NIC driver using the rule nor the end user have
a way to know that these keys were dropped along the way, or that
incorrect parameters were entered.

This kind of check should be left to either the driver, or the ethtool
flow spec layer.

This commit makes so that ethtool parameters are forwarded as-is to the
NIC driver.

Since none of the users of ethtool_rx_flow_rule_create are using the
VLAN dissector, I don't think this qualifies as a regression.

Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: default avatarPablo Neira Ayuso <pablo@gnumonks.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 38df5fd9
...@@ -3008,11 +3008,12 @@ ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input) ...@@ -3008,11 +3008,12 @@ ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input)
const struct ethtool_flow_ext *ext_h_spec = &fs->h_ext; const struct ethtool_flow_ext *ext_h_spec = &fs->h_ext;
const struct ethtool_flow_ext *ext_m_spec = &fs->m_ext; const struct ethtool_flow_ext *ext_m_spec = &fs->m_ext;
if (ext_m_spec->vlan_etype && if (ext_m_spec->vlan_etype) {
ext_m_spec->vlan_tci) {
match->key.vlan.vlan_tpid = ext_h_spec->vlan_etype; match->key.vlan.vlan_tpid = ext_h_spec->vlan_etype;
match->mask.vlan.vlan_tpid = ext_m_spec->vlan_etype; match->mask.vlan.vlan_tpid = ext_m_spec->vlan_etype;
}
if (ext_m_spec->vlan_tci) {
match->key.vlan.vlan_id = match->key.vlan.vlan_id =
ntohs(ext_h_spec->vlan_tci) & 0x0fff; ntohs(ext_h_spec->vlan_tci) & 0x0fff;
match->mask.vlan.vlan_id = match->mask.vlan.vlan_id =
...@@ -3022,7 +3023,10 @@ ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input) ...@@ -3022,7 +3023,10 @@ ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input)
(ntohs(ext_h_spec->vlan_tci) & 0xe000) >> 13; (ntohs(ext_h_spec->vlan_tci) & 0xe000) >> 13;
match->mask.vlan.vlan_priority = match->mask.vlan.vlan_priority =
(ntohs(ext_m_spec->vlan_tci) & 0xe000) >> 13; (ntohs(ext_m_spec->vlan_tci) & 0xe000) >> 13;
}
if (ext_m_spec->vlan_etype ||
ext_m_spec->vlan_tci) {
match->dissector.used_keys |= match->dissector.used_keys |=
BIT(FLOW_DISSECTOR_KEY_VLAN); BIT(FLOW_DISSECTOR_KEY_VLAN);
match->dissector.offset[FLOW_DISSECTOR_KEY_VLAN] = match->dissector.offset[FLOW_DISSECTOR_KEY_VLAN] =
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment