Commit 5fac0e18 authored by Shawn Guo's avatar Shawn Guo

mtd: gpmi: move to use generic DMA helper

With the generic DMA device tree helper supported by mxs-dma driver,
client devices only need to call dma_request_slave_channel() for
requesting a DMA channel from dmaengine.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Acked-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: default avatarArnd Bergmann <arnd@arndb.de>
parent e5aba13d
......@@ -7,10 +7,12 @@ Required properties:
- compatible : should be "fsl,<chip>-gpmi-nand"
- reg : should contain registers location and length for gpmi and bch.
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
- interrupts : The first is the DMA interrupt number for GPMI.
The second is the BCH interrupt number.
- interrupt-names : The interrupt names "gpmi-dma", "bch";
- fsl,gpmi-dma-channel : Should contain the dma channel it uses.
- interrupts : BCH interrupt number.
- interrupt-names : Should be "bch".
- dmas: DMA specifier, consisting of a phandle to DMA controller node
and GPMI DMA channel ID.
Refer to dma.txt and fsl-mxs-dma.txt for details.
- dma-names: Must be "rx-tx".
Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
......@@ -27,9 +29,10 @@ gpmi-nand@8000c000 {
#size-cells = <1>;
reg = <0x8000c000 2000>, <0x8000a000 2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
fsl,gpmi-dma-channel = <4>;
interrupts = <41>;
interrupt-names = "bch";
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
partition@0 {
...
......
......@@ -36,7 +36,6 @@
#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch"
#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch"
#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma"
/* add our owner bbt descriptor */
static uint8_t scan_ff_pattern[] = { 0xff };
......@@ -420,28 +419,6 @@ static void release_bch_irq(struct gpmi_nand_data *this)
free_irq(i, this);
}
static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
{
struct gpmi_nand_data *this = param;
int dma_channel = (int)this->private;
if (!mxs_dma_is_apbh(chan))
return false;
/*
* only catch the GPMI dma channels :
* for mx23 : MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
* (These four channels share the same IRQ!)
*
* for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
* (These eight channels share the same IRQ!)
*/
if (dma_channel == chan->chan_id) {
chan->private = &this->dma_data;
return true;
}
return false;
}
static void release_dma_channels(struct gpmi_nand_data *this)
{
unsigned int i;
......@@ -455,36 +432,10 @@ static void release_dma_channels(struct gpmi_nand_data *this)
static int acquire_dma_channels(struct gpmi_nand_data *this)
{
struct platform_device *pdev = this->pdev;
struct resource *r_dma;
struct device_node *dn;
u32 dma_channel;
int ret;
struct dma_chan *dma_chan;
dma_cap_mask_t mask;
/* dma channel, we only use the first one. */
dn = pdev->dev.of_node;
ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
if (ret) {
pr_err("unable to get DMA channel from dt.\n");
goto acquire_err;
}
this->private = (void *)dma_channel;
/* gpmi dma interrupt */
r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
GPMI_NAND_DMA_INTERRUPT_RES_NAME);
if (!r_dma) {
pr_err("Can't get resource for DMA\n");
goto acquire_err;
}
this->dma_data.chan_irq = r_dma->start;
/* request dma channel */
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
if (!dma_chan) {
pr_err("Failed to request DMA channel.\n");
goto acquire_err;
......
......@@ -20,7 +20,7 @@
#include <linux/mtd/nand.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/fsl/mxs-dma.h>
#include <linux/dmaengine.h>
#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
struct resources {
......@@ -180,7 +180,6 @@ struct gpmi_nand_data {
/* DMA channels */
#define DMA_CHANS 8
struct dma_chan *dma_chans[DMA_CHANS];
struct mxs_dma_data dma_data;
enum dma_ops_type last_dma_type;
enum dma_ops_type dma_type;
struct completion dma_done;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment