Commit 5fb5caee authored by Enric Balletbo i Serra's avatar Enric Balletbo i Serra Committed by Lee Jones

pwm-backlight: Enable/disable the PWM before/after LCD enable toggle.

Before this patch the enable signal was set before the PWM signal and
vice-versa on power off. This sequence is wrong, at least, it is on
the different panels datasheets that I checked, so I inverted the sequence
to follow the specs.

For reference the following panels have the mentioned sequence:
  - N133HSE-EA1 (Innolux)
  - N116BGE (Innolux)
  - N156BGE-L21 (Innolux)
  - B101EAN0 (Auo)
  - B101AW03 (Auo)
  - LTN101NT05 (Samsung)
  - CLAA101WA01A (Chunghwa)
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: default avatarDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: default avatarJingoo Han <jingoohan1@gmail.com>
Acked-by: default avatarThierry Reding <thierry.reding@gmail.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent dda6fde8
...@@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) ...@@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
if (err < 0) if (err < 0)
dev_err(pb->dev, "failed to enable power supply\n"); dev_err(pb->dev, "failed to enable power supply\n");
pwm_enable(pb->pwm);
if (pb->enable_gpio) if (pb->enable_gpio)
gpiod_set_value_cansleep(pb->enable_gpio, 1); gpiod_set_value_cansleep(pb->enable_gpio, 1);
pwm_enable(pb->pwm);
pb->enabled = true; pb->enabled = true;
} }
...@@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb) ...@@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
if (!pb->enabled) if (!pb->enabled)
return; return;
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
if (pb->enable_gpio) if (pb->enable_gpio)
gpiod_set_value_cansleep(pb->enable_gpio, 0); gpiod_set_value_cansleep(pb->enable_gpio, 0);
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
regulator_disable(pb->power_supply); regulator_disable(pb->power_supply);
pb->enabled = false; pb->enabled = false;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment