Commit 5fbd305d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time/clocksource: Fix kernel-doc warnings
  rtc: m41t80: Workaround broken alarm functionality
  rtc: Expire alarms after the time is set.
parents a205b082 b1b73d09
......@@ -73,6 +73,8 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
err = -EINVAL;
mutex_unlock(&rtc->ops_lock);
/* A timer might have just expired */
schedule_work(&rtc->irqwork);
return err;
}
EXPORT_SYMBOL_GPL(rtc_set_time);
......@@ -112,6 +114,8 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
err = -EINVAL;
mutex_unlock(&rtc->ops_lock);
/* A timer might have just expired */
schedule_work(&rtc->irqwork);
return err;
}
......@@ -403,6 +407,8 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node);
}
mutex_unlock(&rtc->ops_lock);
/* maybe that was in the past.*/
schedule_work(&rtc->irqwork);
return err;
}
EXPORT_SYMBOL_GPL(rtc_initialize_alarm);
......
......@@ -357,10 +357,19 @@ static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t)
static struct rtc_class_ops m41t80_rtc_ops = {
.read_time = m41t80_rtc_read_time,
.set_time = m41t80_rtc_set_time,
/*
* XXX - m41t80 alarm functionality is reported broken.
* until it is fixed, don't register alarm functions.
*
.read_alarm = m41t80_rtc_read_alarm,
.set_alarm = m41t80_rtc_set_alarm,
*/
.proc = m41t80_rtc_proc,
/*
* See above comment on broken alarm
*
.alarm_irq_enable = m41t80_rtc_alarm_irq_enable,
*/
};
#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
......
......@@ -71,7 +71,7 @@ struct timecounter {
/**
* cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
* @tc: Pointer to cycle counter.
* @cc: Pointer to cycle counter.
* @cycles: Cycles
*
* XXX - This could use some mult_lxl_ll() asm optimization. Same code
......@@ -114,7 +114,7 @@ extern u64 timecounter_read(struct timecounter *tc);
* time base as values returned by
* timecounter_read()
* @tc: Pointer to time counter.
* @cycle: a value returned by tc->cc->read()
* @cycle_tstamp: a value returned by tc->cc->read()
*
* Cycle counts that are converted correctly as long as they
* fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
......@@ -156,11 +156,12 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
* @maxadj maximum adjustment value to mult (~11%)
* @maxadj: maximum adjustment value to mult (~11%)
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
* @resume: resume function for the clocksource, if necessary
* @cycle_last: most recent cycle counter value seen by ::read()
*/
struct clocksource {
/*
......@@ -187,6 +188,7 @@ struct clocksource {
void (*suspend)(struct clocksource *cs);
void (*resume)(struct clocksource *cs);
/* private: */
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
......@@ -261,6 +263,9 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
/**
* clocksource_cyc2ns - converts clocksource cycles to nanoseconds
* @cycles: cycles
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
*
* Converts cycles to nanoseconds, using the given mult and shift.
*
......
......@@ -647,7 +647,7 @@ static void clocksource_enqueue(struct clocksource *cs)
/**
* __clocksource_updatefreq_scale - Used update clocksource with new freq
* @t: clocksource to be registered
* @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
......@@ -699,7 +699,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
/**
* __clocksource_register_scale - Used to install new clocksources
* @t: clocksource to be registered
* @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
......@@ -727,7 +727,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
/**
* clocksource_register - Used to install new clocksources
* @t: clocksource to be registered
* @cs: clocksource to be registered
*
* Returns -EBUSY if registration fails, zero otherwise.
*/
......@@ -761,6 +761,8 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating)
/**
* clocksource_change_rating - Change the rating of a registered clocksource
* @cs: clocksource to be changed
* @rating: new rating
*/
void clocksource_change_rating(struct clocksource *cs, int rating)
{
......@@ -772,6 +774,7 @@ EXPORT_SYMBOL(clocksource_change_rating);
/**
* clocksource_unregister - remove a registered clocksource
* @cs: clocksource to be unregistered
*/
void clocksource_unregister(struct clocksource *cs)
{
......@@ -787,6 +790,7 @@ EXPORT_SYMBOL(clocksource_unregister);
/**
* sysfs_show_current_clocksources - sysfs interface for current clocksource
* @dev: unused
* @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing current clocksource.
......@@ -807,6 +811,7 @@ sysfs_show_current_clocksources(struct sys_device *dev,
/**
* sysfs_override_clocksource - interface for manually overriding clocksource
* @dev: unused
* @attr: unused
* @buf: name of override clocksource
* @count: length of buffer
*
......@@ -842,6 +847,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
/**
* sysfs_show_available_clocksources - sysfs interface for listing clocksource
* @dev: unused
* @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing registered clocksources
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment