Commit 5fd41f2a authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal updates from Zhang Rui:
 "Specifics:

   - adds full support for 2 types of Thermal Controllers produced by
     STMicroelectronics.  One is a more traditional memory mapped
     variant, the other is controlled solely by system configuration
     registers.  From Lee Jones.

   - add TMU (Thermal Management Unit) support for Exynos3250 Soc.
     From Chanwoo Choi.

   - add critical and passive trip point support for int3403 thermal
     driver.  From Srinivas Pandruvada.

   - a couple of small fixes/cleanups from Javi Merino, and Geert
     Uytterhoeven"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: document struct thermal_zone_device and thermal_governor
  thermal: cpu_cooling: fix typo highjack -> hijack
  thermal: rcar: Document SoC-specific bindings
  thermal: samsung: Add TMU support for Exynos3250 SoC
  thermal: exynos: fix ordering in exynos_tmu_remove()
  thermal: allow building dove_thermal with mvebu
  thermal: sti: Add support for ST's Memory Mapped based Thermal controller
  thermal: sti: Add support for ST's System Config Register based Thermal controller
  thermal: sti: Introduce ST Thermal core code
  thermal: sti: Supply Device Tree documentation
  Thermal: int3403: Add CRT and PSV trip
parents 2213d7c2 47d104ba
......@@ -3,6 +3,7 @@
** Required properties:
- compatible : One of the following:
"samsung,exynos3250-tmu"
"samsung,exynos4412-tmu"
"samsung,exynos4210-tmu"
"samsung,exynos5250-tmu"
......
* Renesas R-Car Thermal
Required properties:
- compatible : "renesas,rcar-thermal"
- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal"
as fallback.
Examples with soctypes are:
- "renesas,thermal-r8a73a4" (R-Mobile AP6)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- "renesas,thermal-r8a7791" (R-Car M2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
......@@ -12,18 +18,18 @@ Option properties:
Example (non interrupt support):
thermal@e61f0100 {
compatible = "renesas,rcar-thermal";
reg = <0xe61f0100 0x38>;
thermal@ffc48000 {
compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
};
Example (interrupt support):
thermal@e61f0000 {
compatible = "renesas,rcar-thermal";
compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0xe61f0000 0x14
0xe61f0100 0x38
0xe61f0200 0x38
0xe61f0300 0x38>;
interrupts = <0 69 4>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
Required parameters:
-------------------
compatible : st,<SoC>-<module>-thermal; should be one of:
"st,stih415-sas-thermal",
"st,stih415-mpe-thermal",
"st,stih416-sas-thermal"
"st,stih416-mpe-thermal"
"st,stid127-thermal" or
"st,stih407-thermal"
according to the SoC type (stih415, stih416, stid127, stih407)
and module type (sas or mpe). On stid127 & stih407 there is only
one die/module, so there is no module type in the compatible
string.
clock-names : Should be "thermal".
See: Documentation/devicetree/bindings/resource-names.txt
clocks : Phandle of the clock used by the thermal sensor.
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
Optional parameters:
-------------------
reg : For non-sysconf based sensors, this should be the physical base
address and length of the sensor's registers.
interrupts : Standard way to define interrupt number.
Interrupt is mandatory to be defined when compatible is
"stih416-mpe-thermal".
NB: For thermal sensor's for which no interrupt has been
defined, a polling delay of 1000ms will be used to read the
temperature from device.
Example:
temp1@fdfe8000 {
compatible = "st,stih416-mpe-thermal";
reg = <0xfdfe8000 0x10>;
clock-names = "thermal";
clocks = <&clk_m_mpethsens>;
interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>;
};
......@@ -151,7 +151,7 @@ config KIRKWOOD_THERMAL
config DOVE_THERMAL
tristate "Temperature sensor on Marvell Dove SoCs"
depends on ARCH_DOVE
depends on ARCH_DOVE || MACH_DOVE
depends on OF
help
Support for the Dove thermal sensor driver in the Linux thermal
......@@ -243,4 +243,9 @@ depends on ARCH_EXYNOS
source "drivers/thermal/samsung/Kconfig"
endmenu
menu "STMicroelectronics thermal drivers"
depends on ARCH_STI && OF
source "drivers/thermal/st/Kconfig"
endmenu
endif
......@@ -32,3 +32,4 @@ obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o
obj-$(CONFIG_ST_THERMAL) += st/
......@@ -305,7 +305,7 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
* @event: value showing cpufreq event for which this function invoked.
* @data: callback-specific data
*
* Callback to highjack the notification on cpufreq policy transition.
* Callback to hijack the notification on cpufreq policy transition.
* Every time there is a change in policy, we will intercept and
* update the cpufreq policy with thermal constraints.
*
......
......@@ -33,6 +33,10 @@
struct int3403_sensor {
struct thermal_zone_device *tzone;
unsigned long *thresholds;
unsigned long crit_temp;
int crit_trip_id;
unsigned long psv_temp;
int psv_trip_id;
};
static int sys_get_curr_temp(struct thermal_zone_device *tzone,
......@@ -79,12 +83,18 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone,
struct acpi_device *device = tzone->devdata;
struct int3403_sensor *obj = acpi_driver_data(device);
/*
* get_trip_temp is a mandatory callback but
* PATx method doesn't return any value, so return
* cached value, which was last set from user space.
*/
*temp = obj->thresholds[trip];
if (trip == obj->crit_trip_id)
*temp = obj->crit_temp;
else if (trip == obj->psv_trip_id)
*temp = obj->psv_temp;
else {
/*
* get_trip_temp is a mandatory callback but
* PATx method doesn't return any value, so return
* cached value, which was last set from user space.
*/
*temp = obj->thresholds[trip];
}
return 0;
}
......@@ -92,8 +102,14 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone,
static int sys_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
{
struct acpi_device *device = thermal->devdata;
struct int3403_sensor *obj = acpi_driver_data(device);
/* Mandatory callback, may not mean much here */
*type = THERMAL_TRIP_PASSIVE;
if (trip == obj->crit_trip_id)
*type = THERMAL_TRIP_CRITICAL;
else
*type = THERMAL_TRIP_PASSIVE;
return 0;
}
......@@ -155,6 +171,34 @@ static void acpi_thermal_notify(struct acpi_device *device, u32 event)
}
}
static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp)
{
unsigned long long crt;
acpi_status status;
status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt);
if (ACPI_FAILURE(status))
return -EIO;
*temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET);
return 0;
}
static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp)
{
unsigned long long psv;
acpi_status status;
status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv);
if (ACPI_FAILURE(status))
return -EIO;
*temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET);
return 0;
}
static int acpi_int3403_add(struct acpi_device *device)
{
int result = 0;
......@@ -194,6 +238,15 @@ static int acpi_int3403_add(struct acpi_device *device)
return -ENOMEM;
trip_mask = BIT(trip_cnt) - 1;
}
obj->psv_trip_id = -1;
if (!sys_get_trip_psv(device, &obj->psv_temp))
obj->psv_trip_id = trip_cnt++;
obj->crit_trip_id = -1;
if (!sys_get_trip_crt(device, &obj->crit_temp))
obj->crit_trip_id = trip_cnt++;
obj->tzone = thermal_zone_device_register(acpi_device_bid(device),
trip_cnt, trip_mask, device, &tzone_ops,
NULL, 0, 0);
......
......@@ -504,6 +504,10 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
}
static const struct of_device_id exynos_tmu_match[] = {
{
.compatible = "samsung,exynos3250-tmu",
.data = (void *)EXYNOS3250_TMU_DRV_DATA,
},
{
.compatible = "samsung,exynos4210-tmu",
.data = (void *)EXYNOS4210_TMU_DRV_DATA,
......@@ -677,7 +681,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
goto err_clk_sec;
}
if (pdata->type == SOC_ARCH_EXYNOS4210 ||
if (pdata->type == SOC_ARCH_EXYNOS3250 ||
pdata->type == SOC_ARCH_EXYNOS4210 ||
pdata->type == SOC_ARCH_EXYNOS4412 ||
pdata->type == SOC_ARCH_EXYNOS5250 ||
pdata->type == SOC_ARCH_EXYNOS5260 ||
......@@ -759,10 +764,10 @@ static int exynos_tmu_remove(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
exynos_tmu_control(pdev, false);
exynos_unregister_thermal(data->reg_conf);
exynos_tmu_control(pdev, false);
clk_unprepare(data->clk);
if (!IS_ERR(data->clk_sec))
clk_unprepare(data->clk_sec);
......
......@@ -40,7 +40,8 @@ enum calibration_mode {
};
enum soc_type {
SOC_ARCH_EXYNOS4210 = 1,
SOC_ARCH_EXYNOS3250 = 1,
SOC_ARCH_EXYNOS4210,
SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
SOC_ARCH_EXYNOS5260,
......
......@@ -90,6 +90,95 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
};
#endif
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
.intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
.intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
.intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS3250_TMU_DATA \
.threshold_falling = 10, \
.trigger_levels[0] = 70, \
.trigger_levels[1] = 95, \
.trigger_levels[2] = 110, \
.trigger_levels[3] = 120, \
.trigger_enable[0] = true, \
.trigger_enable[1] = true, \
.trigger_enable[2] = true, \
.trigger_enable[3] = false, \
.trigger_type[0] = THROTTLE_ACTIVE, \
.trigger_type[1] = THROTTLE_ACTIVE, \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_TWO_POINT_TRIMMING, \
.efuse_value = 55, \
.min_efuse_value = 40, \
.max_efuse_value = 100, \
.first_point_trim = 25, \
.second_point_trim = 85, \
.default_temp_offset = 50, \
.freq_tab[0] = { \
.freq_clip_max = 800 * 1000, \
.temp_level = 70, \
}, \
.freq_tab[1] = { \
.freq_clip_max = 400 * 1000, \
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
.registers = &exynos3250_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
#endif
#if defined(CONFIG_SOC_EXYNOS3250)
struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
.tmu_data = {
{
EXYNOS3250_TMU_DATA,
.type = SOC_ARCH_EXYNOS3250,
.test_mux = EXYNOS4412_MUX_ADDR_VALUE,
},
},
.tmu_count = 1,
};
#endif
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
......
......@@ -148,6 +148,13 @@
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
#if defined(CONFIG_SOC_EXYNOS3250)
extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data)
#else
#define EXYNOS3250_TMU_DRV_DATA (NULL)
#endif
#if defined(CONFIG_CPU_EXYNOS4210)
extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
......
config ST_THERMAL
tristate "Thermal sensors on STMicroelectronics STi series of SoCs"
help
Support for thermal sensors on STMicroelectronics STi series of SoCs.
config ST_THERMAL_SYSCFG
select ST_THERMAL
tristate "STi series syscfg register access based thermal sensors"
config ST_THERMAL_MEMMAP
select ST_THERMAL
tristate "STi series memory mapped access based thermal sensors"
obj-$(CONFIG_ST_THERMAL) := st_thermal.o
obj-$(CONFIG_ST_THERMAL_SYSCFG) += st_thermal_syscfg.o
obj-$(CONFIG_ST_THERMAL_MEMMAP) += st_thermal_memmap.o
/*
* ST Thermal Sensor Driver core routines
* Author: Ajit Pal Singh <ajitpal.singh@st.com>
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include "st_thermal.h"
/* The Thermal Framework expects millidegrees */
#define mcelsius(temp) ((temp) * 1000)
/*
* Function to allocate regfields which are common
* between syscfg and memory mapped based sensors
*/
int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
{
struct device *dev = sensor->dev;
struct regmap *regmap = sensor->regmap;
const struct reg_field *reg_fields = sensor->cdata->reg_fields;
sensor->dcorrect = devm_regmap_field_alloc(dev, regmap,
reg_fields[DCORRECT]);
sensor->overflow = devm_regmap_field_alloc(dev, regmap,
reg_fields[OVERFLOW]);
sensor->temp_data = devm_regmap_field_alloc(dev, regmap,
reg_fields[DATA]);
if (IS_ERR(sensor->dcorrect) ||
IS_ERR(sensor->overflow) ||
IS_ERR(sensor->temp_data)) {
dev_err(dev, "failed to allocate common regfields\n");
return -EINVAL;
}
return sensor->ops->alloc_regfields(sensor);
}
static int st_thermal_sensor_on(struct st_thermal_sensor *sensor)
{
int ret;
struct device *dev = sensor->dev;
ret = clk_prepare_enable(sensor->clk);
if (ret) {
dev_err(dev, "failed to enable clk\n");
return ret;
}
ret = sensor->ops->power_ctrl(sensor, POWER_ON);
if (ret) {
dev_err(dev, "failed to power on sensor\n");
clk_disable_unprepare(sensor->clk);
}
return ret;
}
static int st_thermal_sensor_off(struct st_thermal_sensor *sensor)
{
int ret;
ret = sensor->ops->power_ctrl(sensor, POWER_OFF);
if (ret)
return ret;
clk_disable_unprepare(sensor->clk);
return 0;
}
static int st_thermal_calibration(struct st_thermal_sensor *sensor)
{
int ret;
unsigned int val;
struct device *dev = sensor->dev;
/* Check if sensor calibration data is already written */
ret = regmap_field_read(sensor->dcorrect, &val);
if (ret) {
dev_err(dev, "failed to read calibration data\n");
return ret;
}
if (!val) {
/*
* Sensor calibration value not set by bootloader,
* default calibration data to be used
*/
ret = regmap_field_write(sensor->dcorrect,
sensor->cdata->calibration_val);
if (ret)
dev_err(dev, "failed to set calibration data\n");
}
return ret;
}
/* Callback to get temperature from HW*/
static int st_thermal_get_temp(struct thermal_zone_device *th,
unsigned long *temperature)
{
struct st_thermal_sensor *sensor = th->devdata;
struct device *dev = sensor->dev;
unsigned int temp;
unsigned int overflow;
int ret;
ret = regmap_field_read(sensor->overflow, &overflow);
if (ret)
return ret;
if (overflow)
return -EIO;
ret = regmap_field_read(sensor->temp_data, &temp);
if (ret)
return ret;
temp += sensor->cdata->temp_adjust_val;
temp = mcelsius(temp);
dev_dbg(dev, "temperature: %d\n", temp);
*temperature = temp;
return 0;
}
static int st_thermal_get_trip_type(struct thermal_zone_device *th,
int trip, enum thermal_trip_type *type)
{
struct st_thermal_sensor *sensor = th->devdata;
struct device *dev = sensor->dev;
switch (trip) {
case 0:
*type = THERMAL_TRIP_CRITICAL;
break;
default:
dev_err(dev, "invalid trip point\n");
return -EINVAL;
}
return 0;
}
static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
int trip, unsigned long *temp)
{
struct st_thermal_sensor *sensor = th->devdata;
struct device *dev = sensor->dev;
switch (trip) {
case 0:
*temp = mcelsius(sensor->cdata->crit_temp);
break;
default:
dev_err(dev, "Invalid trip point\n");
return -EINVAL;
}
return 0;
}
static struct thermal_zone_device_ops st_tz_ops = {
.get_temp = st_thermal_get_temp,
.get_trip_type = st_thermal_get_trip_type,
.get_trip_temp = st_thermal_get_trip_temp,
};
int st_thermal_register(struct platform_device *pdev,
const struct of_device_id *st_thermal_of_match)
{
struct st_thermal_sensor *sensor;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
const struct of_device_id *match;
int polling_delay;
int ret;
if (!np) {
dev_err(dev, "device tree node not found\n");
return -EINVAL;
}
sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor)
return -ENOMEM;
sensor->dev = dev;
match = of_match_device(st_thermal_of_match, dev);
if (!(match && match->data))
return -EINVAL;
sensor->cdata = match->data;
if (!sensor->cdata->ops)
return -EINVAL;
sensor->ops = sensor->cdata->ops;
ret = sensor->ops->regmap_init(sensor);
if (ret)
return ret;
ret = st_thermal_alloc_regfields(sensor);
if (ret)
return ret;
sensor->clk = devm_clk_get(dev, "thermal");
if (IS_ERR(sensor->clk)) {
dev_err(dev, "failed to fetch clock\n");
return PTR_ERR(sensor->clk);
}
if (sensor->ops->register_enable_irq) {
ret = sensor->ops->register_enable_irq(sensor);
if (ret)
return ret;
}
ret = st_thermal_sensor_on(sensor);
if (ret)
return ret;
ret = st_thermal_calibration(sensor);
if (ret)
goto sensor_off;
polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;
sensor->thermal_dev =
thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
&st_tz_ops, NULL, 0, polling_delay);
if (IS_ERR(sensor->thermal_dev)) {
dev_err(dev, "failed to register thermal zone device\n");
ret = PTR_ERR(sensor->thermal_dev);
goto sensor_off;
}
platform_set_drvdata(pdev, sensor);
return 0;
sensor_off:
st_thermal_sensor_off(sensor);
return ret;
}
EXPORT_SYMBOL_GPL(st_thermal_register);
int st_thermal_unregister(struct platform_device *pdev)
{
struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
st_thermal_sensor_off(sensor);
thermal_zone_device_unregister(sensor->thermal_dev);
return 0;
}
EXPORT_SYMBOL_GPL(st_thermal_unregister);
static int st_thermal_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
return st_thermal_sensor_off(sensor);
}
static int st_thermal_resume(struct device *dev)
{
int ret;
struct platform_device *pdev = to_platform_device(dev);
struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
ret = st_thermal_sensor_on(sensor);
if (ret)
return ret;
ret = st_thermal_calibration(sensor);
if (ret)
return ret;
if (sensor->ops->enable_irq) {
ret = sensor->ops->enable_irq(sensor);
if (ret)
return ret;
}
return 0;
}
SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
EXPORT_SYMBOL_GPL(st_thermal_pm_ops);
MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
MODULE_LICENSE("GPL v2");
/*
* ST Thermal Sensor Driver for STi series of SoCs
* Author: Ajit Pal Singh <ajitpal.singh@st.com>
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __STI_THERMAL_SYSCFG_H
#define __STI_THERMAL_SYSCFG_H
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
enum st_thermal_regfield_ids {
INT_THRESH_HI = 0, /* Top two regfield IDs are mutually exclusive */
TEMP_PWR = 0,
DCORRECT,
OVERFLOW,
DATA,
INT_ENABLE,
MAX_REGFIELDS
};
/* Thermal sensor power states */
enum st_thermal_power_state {
POWER_OFF = 0,
POWER_ON
};
struct st_thermal_sensor;
/**
* Description of private thermal sensor ops.
*
* @power_ctrl: Function for powering on/off a sensor. Clock to the
* sensor is also controlled from this function.
* @alloc_regfields: Allocate regmap register fields, specific to a sensor.
* @do_memmap_regmap: Memory map the thermal register space and init regmap
* instance or find regmap instance.
* @register_irq: Register an interrupt handler for a sensor.
*/
struct st_thermal_sensor_ops {
int (*power_ctrl)(struct st_thermal_sensor *, enum st_thermal_power_state);
int (*alloc_regfields)(struct st_thermal_sensor *);
int (*regmap_init)(struct st_thermal_sensor *);
int (*register_enable_irq)(struct st_thermal_sensor *);
int (*enable_irq)(struct st_thermal_sensor *);
};
/**
* Description of thermal driver compatible data.
*
* @reg_fields: Pointer to the regfields array for a sensor.
* @sys_compat: Pointer to the syscon node compatible string.
* @ops: Pointer to private thermal ops for a sensor.
* @calibration_val: Default calibration value to be written to the DCORRECT
* register field for a sensor.
* @temp_adjust_val: Value to be added/subtracted from the data read from
* the sensor. If value needs to be added please provide a
* positive value and if it is to be subtracted please
* provide a negative value.
* @crit_temp: The temperature beyond which the SoC should be shutdown
* to prevent damage.
*/
struct st_thermal_compat_data {
char *sys_compat;
const struct reg_field *reg_fields;
const struct st_thermal_sensor_ops *ops;
unsigned int calibration_val;
int temp_adjust_val;
int crit_temp;
};
struct st_thermal_sensor {
struct device *dev;
struct thermal_zone_device *thermal_dev;
const struct st_thermal_sensor_ops *ops;
const struct st_thermal_compat_data *cdata;
struct clk *clk;
struct regmap *regmap;
struct regmap_field *pwr;
struct regmap_field *dcorrect;
struct regmap_field *overflow;
struct regmap_field *temp_data;
struct regmap_field *int_thresh_hi;
struct regmap_field *int_enable;
int irq;
void __iomem *mmio_base;
};
extern int st_thermal_register(struct platform_device *pdev,
const struct of_device_id *st_thermal_of_match);
extern int st_thermal_unregister(struct platform_device *pdev);
extern const struct dev_pm_ops st_thermal_pm_ops;
#endif /* __STI_RESET_SYSCFG_H */
/*
* ST Thermal Sensor Driver for memory mapped sensors.
* Author: Ajit Pal Singh <ajitpal.singh@st.com>
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/of.h>
#include <linux/module.h>
#include "st_thermal.h"
#define STIH416_MPE_CONF 0x0
#define STIH416_MPE_STATUS 0x4
#define STIH416_MPE_INT_THRESH 0x8
#define STIH416_MPE_INT_EN 0xC
/* Power control bits for the memory mapped thermal sensor */
#define THERMAL_PDN BIT(4)
#define THERMAL_SRSTN BIT(10)
static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = {
/*
* According to the STIH416 MPE temp sensor data sheet -
* the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be
* written simultaneously for powering on and off the temperature
* sensor. regmap_update_bits() will be used to update the register.
*/
[INT_THRESH_HI] = REG_FIELD(STIH416_MPE_INT_THRESH, 0, 7),
[DCORRECT] = REG_FIELD(STIH416_MPE_CONF, 5, 9),
[OVERFLOW] = REG_FIELD(STIH416_MPE_STATUS, 9, 9),
[DATA] = REG_FIELD(STIH416_MPE_STATUS, 11, 18),
[INT_ENABLE] = REG_FIELD(STIH416_MPE_INT_EN, 0, 0),
};
static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata)
{
struct st_thermal_sensor *sensor = sdata;
thermal_zone_device_update(sensor->thermal_dev);
return IRQ_HANDLED;
}
/* Private ops for the Memory Mapped based thermal sensors */
static int st_mmap_power_ctrl(struct st_thermal_sensor *sensor,
enum st_thermal_power_state power_state)
{
const unsigned int mask = (THERMAL_PDN | THERMAL_SRSTN);
const unsigned int val = power_state ? mask : 0;
return regmap_update_bits(sensor->regmap, STIH416_MPE_CONF, mask, val);
}
static int st_mmap_alloc_regfields(struct st_thermal_sensor *sensor)
{
struct device *dev = sensor->dev;
struct regmap *regmap = sensor->regmap;
const struct reg_field *reg_fields = sensor->cdata->reg_fields;
sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap,
reg_fields[INT_THRESH_HI]);
sensor->int_enable = devm_regmap_field_alloc(dev, regmap,
reg_fields[INT_ENABLE]);
if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) {
dev_err(dev, "failed to alloc mmap regfields\n");
return -EINVAL;
}
return 0;
}
static int st_mmap_enable_irq(struct st_thermal_sensor *sensor)
{
int ret;
/* Set upper critical threshold */
ret = regmap_field_write(sensor->int_thresh_hi,
sensor->cdata->crit_temp -
sensor->cdata->temp_adjust_val);
if (ret)
return ret;
return regmap_field_write(sensor->int_enable, 1);
}
static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor)
{
struct device *dev = sensor->dev;
struct platform_device *pdev = to_platform_device(dev);
int ret;
sensor->irq = platform_get_irq(pdev, 0);
if (sensor->irq < 0) {
dev_err(dev, "failed to register IRQ\n");
return sensor->irq;
}
ret = devm_request_threaded_irq(dev, sensor->irq,
NULL, st_mmap_thermal_trip_handler,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
dev->driver->name, sensor);
if (ret) {
dev_err(dev, "failed to register IRQ %d\n", sensor->irq);
return ret;
}
return st_mmap_enable_irq(sensor);
}
static const struct regmap_config st_416mpe_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static int st_mmap_regmap_init(struct st_thermal_sensor *sensor)
{
struct device *dev = sensor->dev;
struct platform_device *pdev = to_platform_device(dev);
struct resource *res;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "no memory resources defined\n");
return -ENODEV;
}
sensor->mmio_base = devm_ioremap_resource(dev, res);
if (IS_ERR(sensor->mmio_base)) {
dev_err(dev, "failed to remap IO\n");
return PTR_ERR(sensor->mmio_base);
}
sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base,
&st_416mpe_regmap_config);
if (IS_ERR(sensor->regmap)) {
dev_err(dev, "failed to initialise regmap\n");
return PTR_ERR(sensor->regmap);
}
return 0;
}
static const struct st_thermal_sensor_ops st_mmap_sensor_ops = {
.power_ctrl = st_mmap_power_ctrl,
.alloc_regfields = st_mmap_alloc_regfields,
.regmap_init = st_mmap_regmap_init,
.register_enable_irq = st_mmap_register_enable_irq,
.enable_irq = st_mmap_enable_irq,
};
/* Compatible device data stih416 mpe thermal sensor */
const struct st_thermal_compat_data st_416mpe_cdata = {
.reg_fields = st_mmap_thermal_regfields,
.ops = &st_mmap_sensor_ops,
.calibration_val = 14,
.temp_adjust_val = -95,
.crit_temp = 120,
};
/* Compatible device data stih407 thermal sensor */
const struct st_thermal_compat_data st_407_cdata = {
.reg_fields = st_mmap_thermal_regfields,
.ops = &st_mmap_sensor_ops,
.calibration_val = 16,
.temp_adjust_val = -95,
.crit_temp = 120,
};
static struct of_device_id st_mmap_thermal_of_match[] = {
{ .compatible = "st,stih416-mpe-thermal", .data = &st_416mpe_cdata },
{ .compatible = "st,stih407-thermal", .data = &st_407_cdata },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match);
int st_mmap_probe(struct platform_device *pdev)
{
return st_thermal_register(pdev, st_mmap_thermal_of_match);
}
int st_mmap_remove(struct platform_device *pdev)
{
return st_thermal_unregister(pdev);
}
static struct platform_driver st_mmap_thermal_driver = {
.driver = {
.name = "st_thermal_mmap",
.owner = THIS_MODULE,
.pm = &st_thermal_pm_ops,
.of_match_table = st_mmap_thermal_of_match,
},
.probe = st_mmap_probe,
.remove = st_mmap_remove,
};
module_platform_driver(st_mmap_thermal_driver);
MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
MODULE_LICENSE("GPL v2");
/*
* ST Thermal Sensor Driver for syscfg based sensors.
* Author: Ajit Pal Singh <ajitpal.singh@st.com>
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/of.h>
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include "st_thermal.h"
/* STiH415 */
#define STIH415_SYSCFG_FRONT(num) ((num - 100) * 4)
#define STIH415_SAS_THSENS_CONF STIH415_SYSCFG_FRONT(178)
#define STIH415_SAS_THSENS_STATUS STIH415_SYSCFG_FRONT(198)
#define STIH415_SYSCFG_MPE(num) ((num - 600) * 4)
#define STIH415_MPE_THSENS_CONF STIH415_SYSCFG_MPE(607)
#define STIH415_MPE_THSENS_STATUS STIH415_SYSCFG_MPE(667)
/* STiH416 */
#define STIH416_SYSCFG_FRONT(num) ((num - 1000) * 4)
#define STIH416_SAS_THSENS_CONF STIH416_SYSCFG_FRONT(1552)
#define STIH416_SAS_THSENS_STATUS1 STIH416_SYSCFG_FRONT(1554)
#define STIH416_SAS_THSENS_STATUS2 STIH416_SYSCFG_FRONT(1594)
/* STiD127 */
#define STID127_SYSCFG_CPU(num) ((num - 700) * 4)
#define STID127_THSENS_CONF STID127_SYSCFG_CPU(743)
#define STID127_THSENS_STATUS STID127_SYSCFG_CPU(767)
static const struct reg_field st_415sas_regfields[MAX_REGFIELDS] = {
[TEMP_PWR] = REG_FIELD(STIH415_SAS_THSENS_CONF, 9, 9),
[DCORRECT] = REG_FIELD(STIH415_SAS_THSENS_CONF, 4, 8),
[OVERFLOW] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 8, 8),
[DATA] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 10, 16),
};
static const struct reg_field st_415mpe_regfields[MAX_REGFIELDS] = {
[TEMP_PWR] = REG_FIELD(STIH415_MPE_THSENS_CONF, 8, 8),
[DCORRECT] = REG_FIELD(STIH415_MPE_THSENS_CONF, 3, 7),
[OVERFLOW] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 9, 9),
[DATA] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 11, 18),
};
static const struct reg_field st_416sas_regfields[MAX_REGFIELDS] = {
[TEMP_PWR] = REG_FIELD(STIH416_SAS_THSENS_CONF, 9, 9),
[DCORRECT] = REG_FIELD(STIH416_SAS_THSENS_CONF, 4, 8),
[OVERFLOW] = REG_FIELD(STIH416_SAS_THSENS_STATUS1, 8, 8),
[DATA] = REG_FIELD(STIH416_SAS_THSENS_STATUS2, 10, 16),
};
static const struct reg_field st_127_regfields[MAX_REGFIELDS] = {
[TEMP_PWR] = REG_FIELD(STID127_THSENS_CONF, 7, 7),
[DCORRECT] = REG_FIELD(STID127_THSENS_CONF, 2, 6),
[OVERFLOW] = REG_FIELD(STID127_THSENS_STATUS, 9, 9),
[DATA] = REG_FIELD(STID127_THSENS_STATUS, 11, 18),
};
/* Private OPs for System Configuration Register based thermal sensors */
static int st_syscfg_power_ctrl(struct st_thermal_sensor *sensor,
enum st_thermal_power_state power_state)
{
return regmap_field_write(sensor->pwr, power_state);
}
static int st_syscfg_alloc_regfields(struct st_thermal_sensor *sensor)
{
struct device *dev = sensor->dev;
sensor->pwr = devm_regmap_field_alloc(dev, sensor->regmap,
sensor->cdata->reg_fields[TEMP_PWR]);
if (IS_ERR(sensor->pwr)) {
dev_err(dev, "failed to alloc syscfg regfields\n");
return PTR_ERR(sensor->pwr);
}
return 0;
}
static int st_syscfg_regmap_init(struct st_thermal_sensor *sensor)
{
sensor->regmap =
syscon_regmap_lookup_by_compatible(sensor->cdata->sys_compat);
if (IS_ERR(sensor->regmap)) {
dev_err(sensor->dev, "failed to find syscfg regmap\n");
return PTR_ERR(sensor->regmap);
}
return 0;
}
static const struct st_thermal_sensor_ops st_syscfg_sensor_ops = {
.power_ctrl = st_syscfg_power_ctrl,
.alloc_regfields = st_syscfg_alloc_regfields,
.regmap_init = st_syscfg_regmap_init,
};
/* Compatible device data for stih415 sas thermal sensor */
const struct st_thermal_compat_data st_415sas_cdata = {
.sys_compat = "st,stih415-front-syscfg",
.reg_fields = st_415sas_regfields,
.ops = &st_syscfg_sensor_ops,
.calibration_val = 16,
.temp_adjust_val = 20,
.crit_temp = 120,
};
/* Compatible device data for stih415 mpe thermal sensor */
const struct st_thermal_compat_data st_415mpe_cdata = {
.sys_compat = "st,stih415-system-syscfg",
.reg_fields = st_415mpe_regfields,
.ops = &st_syscfg_sensor_ops,
.calibration_val = 16,
.temp_adjust_val = -103,
.crit_temp = 120,
};
/* Compatible device data for stih416 sas thermal sensor */
const struct st_thermal_compat_data st_416sas_cdata = {
.sys_compat = "st,stih416-front-syscfg",
.reg_fields = st_416sas_regfields,
.ops = &st_syscfg_sensor_ops,
.calibration_val = 16,
.temp_adjust_val = 20,
.crit_temp = 120,
};
/* Compatible device data for stid127 thermal sensor */
const struct st_thermal_compat_data st_127_cdata = {
.sys_compat = "st,stid127-cpu-syscfg",
.reg_fields = st_127_regfields,
.ops = &st_syscfg_sensor_ops,
.calibration_val = 8,
.temp_adjust_val = -103,
.crit_temp = 120,
};
static struct of_device_id st_syscfg_thermal_of_match[] = {
{ .compatible = "st,stih415-sas-thermal", .data = &st_415sas_cdata },
{ .compatible = "st,stih415-mpe-thermal", .data = &st_415mpe_cdata },
{ .compatible = "st,stih416-sas-thermal", .data = &st_416sas_cdata },
{ .compatible = "st,stid127-thermal", .data = &st_127_cdata },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, st_syscfg_thermal_of_match);
int st_syscfg_probe(struct platform_device *pdev)
{
return st_thermal_register(pdev, st_syscfg_thermal_of_match);
}
int st_syscfg_remove(struct platform_device *pdev)
{
return st_thermal_unregister(pdev);
}
static struct platform_driver st_syscfg_thermal_driver = {
.driver = {
.name = "st_syscfg_thermal",
.owner = THIS_MODULE,
.pm = &st_thermal_pm_ops,
.of_match_table = st_syscfg_thermal_of_match,
},
.probe = st_syscfg_probe,
.remove = st_syscfg_remove,
};
module_platform_driver(st_syscfg_thermal_driver);
MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
MODULE_LICENSE("GPL v2");
......@@ -158,6 +158,42 @@ struct thermal_attr {
char name[THERMAL_NAME_LENGTH];
};
/**
* struct thermal_zone_device - structure for a thermal zone
* @id: unique id number for each thermal zone
* @type: the thermal zone device type
* @device: &struct device for this thermal zone
* @trip_temp_attrs: attributes for trip points for sysfs: trip temperature
* @trip_type_attrs: attributes for trip points for sysfs: trip type
* @trip_hyst_attrs: attributes for trip points for sysfs: trip hysteresis
* @devdata: private pointer for device private data
* @trips: number of trip points the thermal zone supports
* @passive_delay: number of milliseconds to wait between polls when
* performing passive cooling. Currenty only used by the
* step-wise governor
* @polling_delay: number of milliseconds to wait between polls when
* checking whether trip points have been crossed (0 for
* interrupt driven systems)
* @temperature: current temperature. This is only for core code,
* drivers should use thermal_zone_get_temp() to get the
* current temperature
* @last_temperature: previous temperature read
* @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION
* @passive: 1 if you've crossed a passive trip point, 0 otherwise.
* Currenty only used by the step-wise governor.
* @forced_passive: If > 0, temperature at which to switch on all ACPI
* processor cooling devices. Currently only used by the
* step-wise governor.
* @ops: operations this &thermal_zone_device supports
* @tzp: thermal zone parameters
* @governor: pointer to the governor for this thermal zone
* @thermal_instances: list of &struct thermal_instance of this thermal zone
* @idr: &struct idr to generate unique id for this zone's cooling
* devices
* @lock: lock to protect thermal_instances list
* @node: node in thermal_tz_list (in thermal_core.c)
* @poll_queue: delayed work for polling
*/
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
......@@ -179,12 +215,18 @@ struct thermal_zone_device {
struct thermal_governor *governor;
struct list_head thermal_instances;
struct idr idr;
struct mutex lock; /* protect thermal_instances list */
struct mutex lock;
struct list_head node;
struct delayed_work poll_queue;
};
/* Structure that holds thermal governor information */
/**
* struct thermal_governor - structure that holds thermal governor information
* @name: name of the governor
* @throttle: callback called for every trip point even if temperature is
* below the trip point temperature
* @governor_list: node in thermal_governor_list (in thermal_core.c)
*/
struct thermal_governor {
char name[THERMAL_NAME_LENGTH];
int (*throttle)(struct thermal_zone_device *tz, int trip);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment