Commit 6058ee09 authored by David S. Miller's avatar David S. Miller

Merge tag 'mac80211-for-net-2020-04-15' of...

Merge tag 'mac80211-for-net-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A couple of fixes:
 * FTM responder policy netlink validation fix
   (but the only user validates again later)
 * kernel-doc fixes
 * a fix for a race in mac80211 radio registration vs. userspace
 * a mesh channel switch fix
 * a fix for a syzbot reported kasprintf() issue
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 91fac45c 93e2d04a
......@@ -3669,9 +3669,9 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info)
}
if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
hwname = kasprintf(GFP_KERNEL, "%.*s",
nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
(char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
hwname = kstrndup((char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]),
nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
GFP_KERNEL);
if (!hwname)
return -ENOMEM;
param.hwname = hwname;
......@@ -3691,9 +3691,9 @@ static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info)
if (info->attrs[HWSIM_ATTR_RADIO_ID]) {
idx = nla_get_u32(info->attrs[HWSIM_ATTR_RADIO_ID]);
} else if (info->attrs[HWSIM_ATTR_RADIO_NAME]) {
hwname = kasprintf(GFP_KERNEL, "%.*s",
nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
(char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]));
hwname = kstrndup((char *)nla_data(info->attrs[HWSIM_ATTR_RADIO_NAME]),
nla_len(info->attrs[HWSIM_ATTR_RADIO_NAME]),
GFP_KERNEL);
if (!hwname)
return -ENOMEM;
} else
......
......@@ -905,6 +905,8 @@ struct survey_info {
* protocol frames.
* @control_port_over_nl80211: TRUE if userspace expects to exchange control
* port frames over NL80211 instead of the network interface.
* @control_port_no_preauth: disables pre-auth rx over the nl80211 control
* port for mac80211
* @wep_keys: static WEP keys, if not NULL points to an array of
* CFG80211_MAX_WEP_KEYS WEP keys
* @wep_tx_key: key index (0..3) of the default TX static WEP key
......@@ -1222,6 +1224,7 @@ struct sta_txpwr {
* @he_capa: HE capabilities of station
* @he_capa_len: the length of the HE capabilities
* @airtime_weight: airtime scheduler weight for this station
* @txpwr: transmit power for an associated station
*/
struct station_parameters {
const u8 *supported_rates;
......@@ -4666,6 +4669,9 @@ struct wiphy_iftype_akm_suites {
* @txq_memory_limit: configuration internal TX queue memory limit
* @txq_quantum: configuration of internal TX queue scheduler quantum
*
* @tx_queue_len: allow setting transmit queue len for drivers not using
* wake_tx_queue
*
* @support_mbssid: can HW support association with nontransmitted AP
* @support_only_he_mbssid: don't parse MBSSID elements if it is not
* HE AP, in order to avoid compatibility issues.
......@@ -4681,6 +4687,10 @@ struct wiphy_iftype_akm_suites {
* supported by the driver for each peer
* @tid_config_support.max_retry: maximum supported retry count for
* long/short retry configuration
*
* @max_data_retry_count: maximum supported per TID retry count for
* configuration through the %NL80211_TID_CONFIG_ATTR_RETRY_SHORT and
* %NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes
*/
struct wiphy {
/* assign these fields before you register the wiphy */
......
......@@ -1069,7 +1069,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
if (hw->max_signal <= 0) {
result = -EINVAL;
goto fail_wiphy_register;
goto fail_workqueue;
}
}
......@@ -1135,7 +1135,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
result = ieee80211_init_cipher_suites(local);
if (result < 0)
goto fail_wiphy_register;
goto fail_workqueue;
if (!local->ops->remain_on_channel)
local->hw.wiphy->max_remain_on_channel_duration = 5000;
......@@ -1161,10 +1161,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
/*
* We use the number of queues for feature tests (QoS, HT) internally
* so restrict them appropriately.
......@@ -1217,9 +1213,9 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
goto fail_flows;
rtnl_lock();
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
rtnl_unlock();
if (result < 0) {
wiphy_debug(local->hw.wiphy,
"Failed to initialize rate control algorithm\n");
......@@ -1273,6 +1269,12 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
local->sband_allocated |= BIT(band);
}
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
rtnl_lock();
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
!ieee80211_hw_check(hw, NO_AUTO_VIF)) {
......@@ -1312,17 +1314,17 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
fail_ifa:
#endif
wiphy_unregister(local->hw.wiphy);
fail_wiphy_register:
rtnl_lock();
rate_control_deinitialize(local);
ieee80211_remove_interfaces(local);
fail_rate:
rtnl_unlock();
fail_rate:
fail_flows:
ieee80211_led_exit(local);
destroy_workqueue(local->workqueue);
fail_workqueue:
wiphy_unregister(local->hw.wiphy);
fail_wiphy_register:
if (local->wiphy_ciphers_allocated)
kfree(local->hw.wiphy->cipher_suites);
kfree(local->int_scan_req);
......@@ -1372,8 +1374,8 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
skb_queue_purge(&local->skb_queue_unreliable);
skb_queue_purge(&local->skb_queue_tdls_chsw);
destroy_workqueue(local->workqueue);
wiphy_unregister(local->hw.wiphy);
destroy_workqueue(local->workqueue);
ieee80211_led_exit(local);
kfree(local->int_scan_req);
}
......
......@@ -1257,15 +1257,15 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
mesh_neighbour_update(sdata, mgmt->sa, &elems,
rx_status);
if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
!sdata->vif.csa_active)
ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
if (ifmsh->sync_ops)
ifmsh->sync_ops->rx_bcn_presp(sdata,
stype, mgmt, &elems, rx_status);
if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
!sdata->vif.csa_active)
ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
......@@ -1373,6 +1373,9 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
ieee802_11_parse_elems(pos, len - baselen, true, &elems,
mgmt->bssid, NULL);
if (!mesh_matches_local(sdata, &elems))
return;
ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
if (!--ifmsh->chsw_ttl)
fwd_csa = false;
......
......@@ -644,10 +644,8 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_HE_CAPABILITY] = { .type = NLA_BINARY,
.len = NL80211_HE_MAX_CAPABILITY_LEN },
[NL80211_ATTR_FTM_RESPONDER] = {
.type = NLA_NESTED,
.validation_data = nl80211_ftm_responder_policy,
},
[NL80211_ATTR_FTM_RESPONDER] =
NLA_POLICY_NESTED(nl80211_ftm_responder_policy),
[NL80211_ATTR_TIMEOUT] = NLA_POLICY_MIN(NLA_U32, 1),
[NL80211_ATTR_PEER_MEASUREMENTS] =
NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment