ARM: imx: pllv3: add shift for frequency multiplier

Add shift capabilties for the frequency multiplier (DIV_SELECT) to
support Vybrid's USB PLL oddity. The PLL3 and PLL7 are the only
PLL control registers which have the DIV_SELECT bit shifted by
one. Be aware, there are known documentation errors in the
reference manual too.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/mach-imx/clk-pllv3.c

@@ -31,6 +31,7 @@
  * @base:	 base address of PLL registers
  * @powerup_set: set POWER bit to power up the PLL
  * @div_mask:	 mask of divider bits
+ * @div_shift:	 shift of divider bits
  *
  * IMX PLL clock version 3, found on i.MX6 series.  Divider for pllv3
  * is actually a multiplier, and always sits at bit 0.
@@ -40,6 +41,7 @@ struct clk_pllv3 {
 	void __iomem	*base;
 	bool		powerup_set;
 	u32		div_mask;
+	u32		div_shift;
 };
 
 #define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
@@ -97,7 +99,7 @@ static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
 					   unsigned long parent_rate)
 {
 	struct clk_pllv3 *pll = to_clk_pllv3(hw);
-	u32 div = readl_relaxed(pll->base)  & pll->div_mask;
+	u32 div = (readl_relaxed(pll->base) >> pll->div_shift)  & pll->div_mask;
 
 	return (div == 1) ? parent_rate * 22 : parent_rate * 20;
 }
@@ -125,8 +127,8 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
 		return -EINVAL;
 
 	val = readl_relaxed(pll->base);
-	val &= ~pll->div_mask;
-	val |= div;
+	val &= ~(pll->div_mask << pll->div_shift);
+	val |= (div << pll->div_shift);
 	writel_relaxed(val, pll->base);
 
 	return clk_pllv3_wait_lock(pll);
@@ -295,6 +297,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 	case IMX_PLLV3_SYS:
 		ops = &clk_pllv3_sys_ops;
 		break;
+	case IMX_PLLV3_USB_VF610:
+		pll->div_shift = 1;
 	case IMX_PLLV3_USB:
 		ops = &clk_pllv3_ops;
 		pll->powerup_set = true;

arch/arm/mach-imx/clk-vf610.c

@@ -172,11 +172,11 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 
 	clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
 	clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
-	clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+	clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB_VF610,     "pll3", "pll3_bypass_src", PLL3_CTRL, 0x2);
 	clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
 	clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET,    "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
 	clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
-	clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
+	clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB_VF610,     "pll7", "pll7_bypass_src", PLL7_CTRL, 0x2);
 
 	clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
 	clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);

arch/arm/mach-imx/clk.h

@@ -20,6 +20,7 @@ enum imx_pllv3_type {
 	IMX_PLLV3_GENERIC,
 	IMX_PLLV3_SYS,
 	IMX_PLLV3_USB,
+	IMX_PLLV3_USB_VF610,
 	IMX_PLLV3_AV,
 	IMX_PLLV3_ENET,
 };