Commit 60b050ff authored by Luca Ceresoli's avatar Luca Ceresoli Committed by Lee Jones

mfd: max77714: Add driver for Maxim MAX77714 PMIC

Add a simple driver for the Maxim MAX77714 PMIC, supporting RTC and
watchdog only.
Signed-off-by: default avatarLuca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent d1f31884
...@@ -11695,6 +11695,8 @@ MAXIM MAX77714 PMIC MFD DRIVER ...@@ -11695,6 +11695,8 @@ MAXIM MAX77714 PMIC MFD DRIVER
M: Luca Ceresoli <luca@lucaceresoli.net> M: Luca Ceresoli <luca@lucaceresoli.net>
S: Maintained S: Maintained
F: Documentation/devicetree/bindings/mfd/maxim,max77714.yaml F: Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
F: drivers/mfd/max77714.c
F: include/linux/mfd/max77714.h
MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org> M: Javier Martinez Canillas <javier@dowhile0.org>
......
...@@ -849,6 +849,20 @@ config MFD_MAX77693 ...@@ -849,6 +849,20 @@ config MFD_MAX77693
additional drivers must be enabled in order to use the functionality additional drivers must be enabled in order to use the functionality
of the device. of the device.
config MFD_MAX77714
tristate "Maxim Semiconductor MAX77714 PMIC Support"
depends on I2C
depends on OF || COMPILE_TEST
select MFD_CORE
select REGMAP_I2C
help
Say yes here to add support for Maxim Semiconductor MAX77714.
This is a Power Management IC with 4 buck regulators, 9
low-dropout regulators, 8 GPIOs, RTC, watchdog etc. This driver
provides common support for accessing the device; additional
drivers must be enabled in order to use each functionality of the
device.
config MFD_MAX77843 config MFD_MAX77843
bool "Maxim Semiconductor MAX77843 PMIC Support" bool "Maxim Semiconductor MAX77843 PMIC Support"
depends on I2C=y depends on I2C=y
......
...@@ -162,6 +162,7 @@ obj-$(CONFIG_MFD_MAX77620) += max77620.o ...@@ -162,6 +162,7 @@ obj-$(CONFIG_MFD_MAX77620) += max77620.o
obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77650) += max77650.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o obj-$(CONFIG_MFD_MAX77693) += max77693.o
obj-$(CONFIG_MFD_MAX77714) += max77714.o
obj-$(CONFIG_MFD_MAX77843) += max77843.o obj-$(CONFIG_MFD_MAX77843) += max77843.o
obj-$(CONFIG_MFD_MAX8907) += max8907.o obj-$(CONFIG_MFD_MAX8907) += max8907.o
max8925-objs := max8925-core.o max8925-i2c.o max8925-objs := max8925-core.o max8925-i2c.o
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* Maxim MAX77714 Core Driver
*
* Copyright (C) 2022 Luca Ceresoli
* Author: Luca Ceresoli <luca@lucaceresoli.net>
*/
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/mfd/max77714.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
static const struct mfd_cell max77714_cells[] = {
{ .name = "max77714-watchdog" },
{ .name = "max77714-rtc" },
};
static const struct regmap_range max77714_readable_ranges[] = {
regmap_reg_range(MAX77714_INT_TOP, MAX77714_INT_TOP),
regmap_reg_range(MAX77714_INT_TOPM, MAX77714_INT_TOPM),
regmap_reg_range(MAX77714_32K_STATUS, MAX77714_32K_CONFIG),
regmap_reg_range(MAX77714_CNFG_GLBL2, MAX77714_CNFG2_ONOFF),
};
static const struct regmap_range max77714_writable_ranges[] = {
regmap_reg_range(MAX77714_INT_TOPM, MAX77714_INT_TOPM),
regmap_reg_range(MAX77714_32K_CONFIG, MAX77714_32K_CONFIG),
regmap_reg_range(MAX77714_CNFG_GLBL2, MAX77714_CNFG2_ONOFF),
};
static const struct regmap_access_table max77714_readable_table = {
.yes_ranges = max77714_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(max77714_readable_ranges),
};
static const struct regmap_access_table max77714_writable_table = {
.yes_ranges = max77714_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(max77714_writable_ranges),
};
static const struct regmap_config max77714_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = MAX77714_CNFG2_ONOFF,
.rd_table = &max77714_readable_table,
.wr_table = &max77714_writable_table,
};
static const struct regmap_irq max77714_top_irqs[] = {
REGMAP_IRQ_REG(MAX77714_IRQ_TOP_ONOFF, 0, MAX77714_INT_TOP_ONOFF),
REGMAP_IRQ_REG(MAX77714_IRQ_TOP_RTC, 0, MAX77714_INT_TOP_RTC),
REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GPIO, 0, MAX77714_INT_TOP_GPIO),
REGMAP_IRQ_REG(MAX77714_IRQ_TOP_LDO, 0, MAX77714_INT_TOP_LDO),
REGMAP_IRQ_REG(MAX77714_IRQ_TOP_SD, 0, MAX77714_INT_TOP_SD),
REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GLBL, 0, MAX77714_INT_TOP_GLBL),
};
static const struct regmap_irq_chip max77714_irq_chip = {
.name = "max77714-pmic",
.status_base = MAX77714_INT_TOP,
.mask_base = MAX77714_INT_TOPM,
.num_regs = 1,
.irqs = max77714_top_irqs,
.num_irqs = ARRAY_SIZE(max77714_top_irqs),
};
/*
* MAX77714 initially uses the internal, low precision oscillator. Enable
* the external oscillator by setting the XOSC_RETRY bit. If the external
* oscillator is not OK (probably not installed) this has no effect.
*/
static int max77714_setup_xosc(struct device *dev, struct regmap *regmap)
{
/* Internal Crystal Load Capacitance, indexed by value of 32KLOAD bits */
static const unsigned int load_cap[4] = {0, 10, 12, 22}; /* pF */
unsigned int load_cap_idx;
unsigned int status;
int err;
err = regmap_update_bits(regmap, MAX77714_32K_CONFIG,
MAX77714_32K_CONFIG_XOSC_RETRY,
MAX77714_32K_CONFIG_XOSC_RETRY);
if (err)
return dev_err_probe(dev, err, "Failed to configure the external oscillator\n");
err = regmap_read(regmap, MAX77714_32K_STATUS, &status);
if (err)
return dev_err_probe(dev, err, "Failed to read external oscillator status\n");
load_cap_idx = (status >> MAX77714_32K_STATUS_32KLOAD_SHF)
& MAX77714_32K_STATUS_32KLOAD_MSK;
dev_info(dev, "Using %s oscillator, %d pF load cap\n",
status & MAX77714_32K_STATUS_32KSOURCE ? "internal" : "external",
load_cap[load_cap_idx]);
return 0;
}
static int max77714_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct regmap *regmap;
struct regmap_irq_chip_data *irq_data;
int err;
regmap = devm_regmap_init_i2c(client, &max77714_regmap_config);
if (IS_ERR(regmap))
return dev_err_probe(dev, PTR_ERR(regmap),
"Failed to initialise regmap\n");
err = max77714_setup_xosc(dev, regmap);
if (err)
return err;
err = devm_regmap_add_irq_chip(dev, regmap, client->irq,
IRQF_ONESHOT | IRQF_SHARED, 0,
&max77714_irq_chip, &irq_data);
if (err)
return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n");
err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
max77714_cells, ARRAY_SIZE(max77714_cells),
NULL, 0, NULL);
if (err)
return dev_err_probe(dev, err, "Failed to register child devices\n");
return 0;
}
static const struct of_device_id max77714_dt_match[] = {
{ .compatible = "maxim,max77714" },
{},
};
MODULE_DEVICE_TABLE(of, max77714_dt_match);
static struct i2c_driver max77714_driver = {
.driver = {
.name = "max77714",
.of_match_table = max77714_dt_match,
},
.probe_new = max77714_probe,
};
module_i2c_driver(max77714_driver);
MODULE_DESCRIPTION("Maxim MAX77714 MFD core driver");
MODULE_AUTHOR("Luca Ceresoli <luca@lucaceresoli.net>");
MODULE_LICENSE("GPL");
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Maxim MAX77714 Register and data structures definition.
*
* Copyright (C) 2022 Luca Ceresoli
* Author: Luca Ceresoli <luca@lucaceresoli.net>
*/
#ifndef __LINUX_MFD_MAX77714_H_
#define __LINUX_MFD_MAX77714_H_
#include <linux/bits.h>
#define MAX77714_INT_TOP 0x00
#define MAX77714_INT_TOPM 0x07 /* Datasheet says "read only", but it is RW */
#define MAX77714_INT_TOP_ONOFF BIT(1)
#define MAX77714_INT_TOP_RTC BIT(3)
#define MAX77714_INT_TOP_GPIO BIT(4)
#define MAX77714_INT_TOP_LDO BIT(5)
#define MAX77714_INT_TOP_SD BIT(6)
#define MAX77714_INT_TOP_GLBL BIT(7)
#define MAX77714_32K_STATUS 0x30
#define MAX77714_32K_STATUS_SIOSCOK BIT(5)
#define MAX77714_32K_STATUS_XOSCOK BIT(4)
#define MAX77714_32K_STATUS_32KSOURCE BIT(3)
#define MAX77714_32K_STATUS_32KLOAD_MSK 0x3
#define MAX77714_32K_STATUS_32KLOAD_SHF 1
#define MAX77714_32K_STATUS_CRYSTAL_CFG BIT(0)
#define MAX77714_32K_CONFIG 0x31
#define MAX77714_32K_CONFIG_XOSC_RETRY BIT(4)
#define MAX77714_CNFG_GLBL2 0x91
#define MAX77714_WDTEN BIT(2)
#define MAX77714_WDTSLPC BIT(3)
#define MAX77714_TWD_MASK 0x3
#define MAX77714_TWD_2s 0x0
#define MAX77714_TWD_16s 0x1
#define MAX77714_TWD_64s 0x2
#define MAX77714_TWD_128s 0x3
#define MAX77714_CNFG_GLBL3 0x92
#define MAX77714_WDTC BIT(0)
#define MAX77714_CNFG2_ONOFF 0x94
#define MAX77714_WD_RST_WK BIT(5)
/* Interrupts */
enum {
MAX77714_IRQ_TOP_ONOFF,
MAX77714_IRQ_TOP_RTC, /* Real-time clock */
MAX77714_IRQ_TOP_GPIO, /* GPIOs */
MAX77714_IRQ_TOP_LDO, /* Low-dropout regulators */
MAX77714_IRQ_TOP_SD, /* Step-down regulators */
MAX77714_IRQ_TOP_GLBL, /* "Global resources": Low-Battery, overtemp... */
};
#endif /* __LINUX_MFD_MAX77714_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment