Commit 6139b1b1 authored by Maciej S. Szmigiero's avatar Maciej S. Szmigiero Committed by Mark Brown

ASoC: fsl_ssi: remove explicit register defaults

There is no guarantee that on fsl_ssi module load
SSI registers will have their power-on-reset values.

In fact, if the driver is reloaded the values in
registers will be whatever they were set to previously.

However, the cache needs to be fully populated at probe
time to avoid non-atomic allocations during register
access.

Special case here is imx21-class SSI, since
according to datasheet it don't have SACC{ST,EN,DIS}
regs.

This fixes hard lockup on fsl_ssi module reload,
at least in AC'97 mode.

Fixes: 05cf2379 ("ASoC: fsl_ssi: Add driver suspend and resume to support MEGA Fast")
Signed-off-by: default avatarMaciej S. Szmigiero <mail@maciej.szmigiero.name>
Tested-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 99777b07
......@@ -112,20 +112,6 @@ struct fsl_ssi_rxtx_reg_val {
struct fsl_ssi_reg_val tx;
};
static const struct reg_default fsl_ssi_reg_defaults[] = {
{CCSR_SSI_SCR, 0x00000000},
{CCSR_SSI_SIER, 0x00003003},
{CCSR_SSI_STCR, 0x00000200},
{CCSR_SSI_SRCR, 0x00000200},
{CCSR_SSI_STCCR, 0x00040000},
{CCSR_SSI_SRCCR, 0x00040000},
{CCSR_SSI_SACNT, 0x00000000},
{CCSR_SSI_STMSK, 0x00000000},
{CCSR_SSI_SRMSK, 0x00000000},
{CCSR_SSI_SACCEN, 0x00000000},
{CCSR_SSI_SACCDIS, 0x00000000},
};
static bool fsl_ssi_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
......@@ -190,8 +176,7 @@ static const struct regmap_config fsl_ssi_regconfig = {
.val_bits = 32,
.reg_stride = 4,
.val_format_endian = REGMAP_ENDIAN_NATIVE,
.reg_defaults = fsl_ssi_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(fsl_ssi_reg_defaults),
.num_reg_defaults_raw = CCSR_SSI_SACCDIS / sizeof(uint32_t) + 1,
.readable_reg = fsl_ssi_readable_reg,
.volatile_reg = fsl_ssi_volatile_reg,
.precious_reg = fsl_ssi_precious_reg,
......@@ -201,6 +186,7 @@ static const struct regmap_config fsl_ssi_regconfig = {
struct fsl_ssi_soc_data {
bool imx;
bool imx21regs; /* imx21-class SSI - no SACC{ST,EN,DIS} regs */
bool offline_config;
u32 sisr_write_mask;
};
......@@ -303,6 +289,7 @@ static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = {
static struct fsl_ssi_soc_data fsl_ssi_imx21 = {
.imx = true,
.imx21regs = true,
.offline_config = true,
.sisr_write_mask = 0,
};
......@@ -586,8 +573,12 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private)
*/
regmap_write(regs, CCSR_SSI_SACNT,
CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV);
regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
/* no SACC{ST,EN,DIS} regs on imx21-class SSI */
if (!ssi_private->soc->imx21regs) {
regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
}
/*
* Enable SSI, Transmit and Receive. AC97 has to communicate with the
......@@ -1397,6 +1388,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *iomem;
char name[64];
struct regmap_config regconfig = fsl_ssi_regconfig;
of_id = of_match_device(fsl_ssi_ids, &pdev->dev);
if (!of_id || !of_id->data)
......@@ -1444,15 +1436,25 @@ static int fsl_ssi_probe(struct platform_device *pdev)
return PTR_ERR(iomem);
ssi_private->ssi_phys = res->start;
if (ssi_private->soc->imx21regs) {
/*
* According to datasheet imx21-class SSI
* don't have SACC{ST,EN,DIS} regs.
*/
regconfig.max_register = CCSR_SSI_SRMSK;
regconfig.num_reg_defaults_raw =
CCSR_SSI_SRMSK / sizeof(uint32_t) + 1;
}
ret = of_property_match_string(np, "clock-names", "ipg");
if (ret < 0) {
ssi_private->has_ipg_clk_name = false;
ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
&fsl_ssi_regconfig);
&regconfig);
} else {
ssi_private->has_ipg_clk_name = true;
ssi_private->regs = devm_regmap_init_mmio_clk(&pdev->dev,
"ipg", iomem, &fsl_ssi_regconfig);
"ipg", iomem, &regconfig);
}
if (IS_ERR(ssi_private->regs)) {
dev_err(&pdev->dev, "Failed to init register map\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment