platform/x86/intel/tpmi: Read feature control status

Some of the PM features can be locked or disabled. In that case, write
interface can be locked.

This status is read via a mailbox. There is one TPMI ID which provides
base address for interface and data register for mail box operation.
The mailbox operations is defined in the TPMI specification. Refer to
https://github.com/intel/tpmi_power_management/ for TPMI specifications.

An API is exposed to feature drivers to read feature control status.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230712225950.171326-2-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

drivers/platform/x86/intel/tpmi.c

@@ -47,10 +47,14 @@
  */
 
 #include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
 #include <linux/intel_tpmi.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/sizes.h>
 
 #include "vsec.h"
 
@@ -98,6 +102,7 @@ struct intel_tpmi_pm_feature {
  * @feature_count:	Number of TPMI of TPMI instances pointed by tpmi_features
  * @pfs_start:		Start of PFS offset for the TPMI instances in this device
  * @plat_info:		Stores platform info which can be used by the client drivers
+ * @tpmi_control_mem:	Memory mapped IO for getting control information
  *
  * Stores the information for all TPMI devices enumerated from a single PCI device.
  */
@@ -107,6 +112,7 @@ struct intel_tpmi_info {
 	int feature_count;
 	u64 pfs_start;
 	struct intel_tpmi_plat_info plat_info;
+	void __iomem *tpmi_control_mem;
 };
 
 /**
@@ -139,9 +145,19 @@ enum intel_tpmi_id {
 	TPMI_ID_PEM = 1, /* Power and Perf excursion Monitor */
 	TPMI_ID_UNCORE = 2, /* Uncore Frequency Scaling */
 	TPMI_ID_SST = 5, /* Speed Select Technology */
+	TPMI_CONTROL_ID = 0x80, /* Special ID for getting feature status */
 	TPMI_INFO_ID = 0x81, /* Special ID for PCI BDF and Package ID information */
 };
 
+/*
+ * The size from hardware is in u32 units. This size is from a trusted hardware,
+ * but better to verify for pre silicon platforms. Set size to 0, when invalid.
+ */
+#define TPMI_GET_SINGLE_ENTRY_SIZE(pfs)							\
+({											\
+	pfs->pfs_header.entry_size > SZ_1K ? 0 : pfs->pfs_header.entry_size << 2;	\
+})
+
 /* Used during auxbus device creation */
 static DEFINE_IDA(intel_vsec_tpmi_ida);
 
@@ -175,6 +191,167 @@ struct resource *tpmi_get_resource_at_index(struct auxiliary_device *auxdev, int
 }
 EXPORT_SYMBOL_NS_GPL(tpmi_get_resource_at_index, INTEL_TPMI);
 
+/* TPMI Control Interface */
+
+#define TPMI_CONTROL_STATUS_OFFSET	0x00
+#define TPMI_COMMAND_OFFSET		0x08
+
+/*
+ * Spec is calling for max 1 seconds to get ownership at the worst
+ * case. Read at 10 ms timeouts and repeat up to 1 second.
+ */
+#define TPMI_CONTROL_TIMEOUT_US		(10 * USEC_PER_MSEC)
+#define TPMI_CONTROL_TIMEOUT_MAX_US	(1 * USEC_PER_SEC)
+
+#define TPMI_RB_TIMEOUT_US		(10 * USEC_PER_MSEC)
+#define TPMI_RB_TIMEOUT_MAX_US		USEC_PER_SEC
+
+/* TPMI Control status register defines */
+
+#define TPMI_CONTROL_STATUS_RB		BIT_ULL(0)
+
+#define TPMI_CONTROL_STATUS_OWNER	GENMASK_ULL(5, 4)
+#define TPMI_OWNER_NONE			0
+#define TPMI_OWNER_IN_BAND		1
+
+#define TPMI_CONTROL_STATUS_CPL		BIT_ULL(6)
+#define TPMI_CONTROL_STATUS_RESULT	GENMASK_ULL(15, 8)
+#define TPMI_CONTROL_STATUS_LEN		GENMASK_ULL(31, 16)
+
+#define TPMI_CMD_PKT_LEN		2
+#define TPMI_CMD_STATUS_SUCCESS		0x40
+
+/* TPMI command data registers */
+#define TMPI_CONTROL_DATA_CMD		GENMASK_ULL(7, 0)
+#define TMPI_CONTROL_DATA_VAL		GENMASK_ULL(63, 32)
+#define TPMI_CONTROL_DATA_VAL_FEATURE	GENMASK_ULL(48, 40)
+
+/* Command to send via control interface */
+#define TPMI_CONTROL_GET_STATE_CMD	0x10
+
+#define TPMI_CONTROL_CMD_MASK		GENMASK_ULL(48, 40)
+
+#define TPMI_CMD_LEN_MASK		GENMASK_ULL(18, 16)
+
+#define TPMI_STATE_DISABLED		BIT_ULL(0)
+#define TPMI_STATE_LOCKED		BIT_ULL(31)
+
+/* Mutex to complete get feature status without interruption */
+static DEFINE_MUTEX(tpmi_dev_lock);
+
+static int tpmi_wait_for_owner(struct intel_tpmi_info *tpmi_info, u8 owner)
+{
+	u64 control;
+
+	return readq_poll_timeout(tpmi_info->tpmi_control_mem + TPMI_CONTROL_STATUS_OFFSET,
+				  control, owner == FIELD_GET(TPMI_CONTROL_STATUS_OWNER, control),
+				  TPMI_CONTROL_TIMEOUT_US, TPMI_CONTROL_TIMEOUT_MAX_US);
+}
+
+static int tpmi_read_feature_status(struct intel_tpmi_info *tpmi_info, int feature_id,
+				    int *locked, int *disabled)
+{
+	u64 control, data;
+	int ret;
+
+	if (!tpmi_info->tpmi_control_mem)
+		return -EFAULT;
+
+	mutex_lock(&tpmi_dev_lock);
+
+	/* Wait for owner bit set to 0 (none) */
+	ret = tpmi_wait_for_owner(tpmi_info, TPMI_OWNER_NONE);
+	if (ret)
+		goto err_unlock;
+
+	/* set command id to 0x10 for TPMI_GET_STATE */
+	data = FIELD_PREP(TMPI_CONTROL_DATA_CMD, TPMI_CONTROL_GET_STATE_CMD);
+
+	/* 32 bits for DATA offset and +8 for feature_id field */
+	data |= FIELD_PREP(TPMI_CONTROL_DATA_VAL_FEATURE, feature_id);
+
+	/* Write at command offset for qword access */
+	writeq(data, tpmi_info->tpmi_control_mem + TPMI_COMMAND_OFFSET);
+
+	/* Wait for owner bit set to in-band */
+	ret = tpmi_wait_for_owner(tpmi_info, TPMI_OWNER_IN_BAND);
+	if (ret)
+		goto err_unlock;
+
+	/* Set Run Busy and packet length of 2 dwords */
+	control = TPMI_CONTROL_STATUS_RB;
+	control |= FIELD_PREP(TPMI_CONTROL_STATUS_LEN, TPMI_CMD_PKT_LEN);
+
+	/* Write at status offset for qword access */
+	writeq(control, tpmi_info->tpmi_control_mem + TPMI_CONTROL_STATUS_OFFSET);
+
+	/* Wait for Run Busy clear */
+	ret = readq_poll_timeout(tpmi_info->tpmi_control_mem + TPMI_CONTROL_STATUS_OFFSET,
+				 control, !(control & TPMI_CONTROL_STATUS_RB),
+				 TPMI_RB_TIMEOUT_US, TPMI_RB_TIMEOUT_MAX_US);
+	if (ret)
+		goto done_proc;
+
+	control = FIELD_GET(TPMI_CONTROL_STATUS_RESULT, control);
+	if (control != TPMI_CMD_STATUS_SUCCESS) {
+		ret = -EBUSY;
+		goto done_proc;
+	}
+
+	/* Response is ready */
+	data = readq(tpmi_info->tpmi_control_mem + TPMI_COMMAND_OFFSET);
+	data = FIELD_GET(TMPI_CONTROL_DATA_VAL, data);
+
+	*disabled = 0;
+	*locked = 0;
+
+	if (!(data & TPMI_STATE_DISABLED))
+		*disabled = 1;
+
+	if (data & TPMI_STATE_LOCKED)
+		*locked = 1;
+
+	ret = 0;
+
+done_proc:
+	/* Set CPL "completion" bit */
+	writeq(TPMI_CONTROL_STATUS_CPL, tpmi_info->tpmi_control_mem + TPMI_CONTROL_STATUS_OFFSET);
+
+err_unlock:
+	mutex_unlock(&tpmi_dev_lock);
+
+	return ret;
+}
+
+int tpmi_get_feature_status(struct auxiliary_device *auxdev, int feature_id,
+			    int *locked, int *disabled)
+{
+	struct intel_vsec_device *intel_vsec_dev = dev_to_ivdev(auxdev->dev.parent);
+	struct intel_tpmi_info *tpmi_info = auxiliary_get_drvdata(&intel_vsec_dev->auxdev);
+
+	return tpmi_read_feature_status(tpmi_info, feature_id, locked, disabled);
+}
+EXPORT_SYMBOL_NS_GPL(tpmi_get_feature_status, INTEL_TPMI);
+
+static void tpmi_set_control_base(struct auxiliary_device *auxdev,
+				  struct intel_tpmi_info *tpmi_info,
+				  struct intel_tpmi_pm_feature *pfs)
+{
+	void __iomem *mem;
+	u32 size;
+
+	size = TPMI_GET_SINGLE_ENTRY_SIZE(pfs);
+	if (!size)
+		return;
+
+	mem = devm_ioremap(&auxdev->dev, pfs->vsec_offset, size);
+	if (!mem)
+		return;
+
+	/* mem is pointing to TPMI CONTROL base */
+	tpmi_info->tpmi_control_mem = mem;
+}
+
 static const char *intel_tpmi_name(enum intel_tpmi_id id)
 {
 	switch (id) {
@@ -369,6 +546,9 @@ static int intel_vsec_tpmi_init(struct auxiliary_device *auxdev)
 		 */
 		if (pfs->pfs_header.tpmi_id == TPMI_INFO_ID)
 			tpmi_process_info(tpmi_info, pfs);
+
+		if (pfs->pfs_header.tpmi_id == TPMI_CONTROL_ID)
+			tpmi_set_control_base(auxdev, tpmi_info, pfs);
 	}
 
 	tpmi_info->pfs_start = pfs_start;

include/linux/intel_tpmi.h

@@ -27,4 +27,6 @@ struct intel_tpmi_plat_info *tpmi_get_platform_data(struct auxiliary_device *aux
 struct resource *tpmi_get_resource_at_index(struct auxiliary_device *auxdev, int index);
 int tpmi_get_resource_count(struct auxiliary_device *auxdev);
 
+int tpmi_get_feature_status(struct auxiliary_device *auxdev, int feature_id, int *locked,
+			    int *disabled);
 #endif