can: xilinx_can: use can_change_state()

Replace some custom code with a call to can_change_state().

This subtly changes the error reporting behavior when both RX and TX
error counters indicate the same state.

Previously, if both RX and TX counters indicated the same state:
- if overall state is PASSIVE, report CAN_ERR_CRTL_RX_PASSIVE
- if overall state is WARNING, report CAN_ERR_CRTL_TX_WARNING or
  CAN_ERR_CRTL_RX_WARNING depending on which counter is higher,
  or CAN_ERR_CRTL_RX_WARNING if the counters have the same value.

After this commit:
- report RX_* or TX_* depending on which counter is higher, or both if
  the counters have exactly the same value.

This behavior is consistent with many other CAN drivers that use this
same code pattern.

Tested with the integrated CAN on Zynq-7000 SoC.

v2: Simplify resolving states as suggested by Andri Yngvason.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/xilinx_can.c

@@ -594,39 +594,19 @@ static void xcan_set_error_state(struct net_device *ndev,
 	u32 ecr = priv->read_reg(priv, XCAN_ECR_OFFSET);
 	u32 txerr = ecr & XCAN_ECR_TEC_MASK;
 	u32 rxerr = (ecr & XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT;
+	enum can_state tx_state = txerr >= rxerr ? new_state : 0;
+	enum can_state rx_state = txerr <= rxerr ? new_state : 0;
 
-	priv->can.state = new_state;
+	/* non-ERROR states are handled elsewhere */
+	if (WARN_ON(new_state > CAN_STATE_ERROR_PASSIVE))
+		return;
+
+	can_change_state(ndev, cf, tx_state, rx_state);
 
 	if (cf) {
-		cf->can_id |= CAN_ERR_CRTL;
 		cf->data[6] = txerr;
 		cf->data[7] = rxerr;
 	}
-
-	switch (new_state) {
-	case CAN_STATE_ERROR_PASSIVE:
-		priv->can.can_stats.error_passive++;
-		if (cf)
-			cf->data[1] = (rxerr > 127) ?
-					CAN_ERR_CRTL_RX_PASSIVE :
-					CAN_ERR_CRTL_TX_PASSIVE;
-		break;
-	case CAN_STATE_ERROR_WARNING:
-		priv->can.can_stats.error_warning++;
-		if (cf)
-			cf->data[1] |= (txerr > rxerr) ?
-					CAN_ERR_CRTL_TX_WARNING :
-					CAN_ERR_CRTL_RX_WARNING;
-		break;
-	case CAN_STATE_ERROR_ACTIVE:
-		if (cf)
-			cf->data[1] |= CAN_ERR_CRTL_ACTIVE;
-		break;
-	default:
-		/* non-ERROR states are handled elsewhere */
-		WARN_ON(1);
-		break;
-	}
 }
 
 /**