Commit 619a341b authored by Takashi Iwai's avatar Takashi Iwai

Revert "ALSA: hda - Set codec to D3 forcibly even if not used"

This reverts commit 785f857d.

The commit causes a problem with the wrong D3 state after suspend
because the call of hda_set_power_state() involves with the power-up
sequence, which changes the power_count, and this confuses the resume
sequence that checks the power_count as well.

Originally, this go-to-D3 sequence should be a simple task without the
power-up sequence.  But, it'd need some proper sanity checks in the
case of power-saved state, so it's not too easy to write now in the
3.4-rc cycle.

In short, the safest option now is to revert this affecting commit.

Of course, we need to clean up and robustify the power-saving code
better for 3.5 kernel.
Reported-by: default avatarKonstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent af741c15
......@@ -5444,10 +5444,6 @@ int snd_hda_suspend(struct hda_bus *bus)
list_for_each_entry(codec, &bus->codec_list, list) {
if (hda_codec_is_power_on(codec))
hda_call_codec_suspend(codec);
else /* forcibly change the power to D3 even if not used */
hda_set_power_state(codec,
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D3);
if (codec->patch_ops.post_suspend)
codec->patch_ops.post_suspend(codec);
}
......
......@@ -2351,6 +2351,17 @@ static void azx_power_notify(struct hda_bus *bus)
* power management
*/
static int snd_hda_codecs_inuse(struct hda_bus *bus)
{
struct hda_codec *codec;
list_for_each_entry(codec, &bus->codec_list, list) {
if (snd_hda_codec_needs_resume(codec))
return 1;
}
return 0;
}
static int azx_suspend(struct pci_dev *pci, pm_message_t state)
{
struct snd_card *card = pci_get_drvdata(pci);
......@@ -2397,7 +2408,8 @@ static int azx_resume(struct pci_dev *pci)
return -EIO;
azx_init_pci(chip);
azx_init_chip(chip, 1);
if (snd_hda_codecs_inuse(chip->bus))
azx_init_chip(chip, 1);
snd_hda_resume(chip->bus);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment