Merge bk://kernel.bkbits.net/davem/set_pte-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/i386/kernel/i386_ksyms.c

@@ -97,6 +97,11 @@ EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
 EXPORT_SYMBOL(__get_user_4);
 
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+
 EXPORT_SYMBOL(strpbrk);
 EXPORT_SYMBOL(strstr);
 

arch/i386/kernel/signal.c

@@ -277,6 +277,18 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
 {
 	int tmp, err = 0;
 
+	/*
+	 * If TF is set due to a debugger (PT_DTRACE), clear the TF
+	 * flag so that register information in the sigcontext is
+	 * correct.
+	 */
+	if (unlikely(regs->eflags & TF_MASK)) {
+		if (likely(current->ptrace & PT_DTRACE)) {
+			current->ptrace &= ~PT_DTRACE;
+			regs->eflags &= ~TF_MASK;
+		}
+	}
+
 	tmp = 0;
 	__asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp));
 	err |= __put_user(tmp, (unsigned int __user *)&sc->gs);

arch/i386/lib/Makefile

@@ -3,7 +3,7 @@
 #
 
 
-lib-y = checksum.o delay.o usercopy.o getuser.o memcpy.o strstr.o \
+lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \
 	bitops.o
 
 lib-$(CONFIG_X86_USE_3DNOW) += mmx.o

arch/i386/lib/putuser.S

+/*
+ * __put_user functions.
+ *
+ * (C) Copyright 2005 Linus Torvalds
+ *
+ * These functions have a non-standard call interface
+ * to make them more efficient, especially as they
+ * return an error value in addition to the "real"
+ * return value.
+ */
+#include <asm/thread_info.h>
+
+
+/*
+ * __put_user_X
+ *
+ * Inputs:	%eax[:%edx] contains the data
+ *		%ecx contains the address
+ *
+ * Outputs:	%eax is error code (0 or -EFAULT)
+ *
+ * These functions should not modify any other registers,
+ * as they get called from within inline assembly.
+ */
+
+#define ENTER	pushl %ebx ; GET_THREAD_INFO(%ebx)
+#define EXIT	popl %ebx ; ret
+
+.text
+.align 4
+.globl __put_user_1
+__put_user_1:
+	ENTER
+	cmpl TI_addr_limit(%ebx),%ecx
+	jae bad_put_user
+1:	movb %al,(%ecx)
+	xorl %eax,%eax
+	EXIT
+
+.align 4
+.globl __put_user_2
+__put_user_2:
+	ENTER
+	movl TI_addr_limit(%ebx),%ebx
+	subl $1,%ebx
+	cmpl %ebx,%ecx
+	jae bad_put_user
+2:	movw %ax,(%ecx)
+	xorl %eax,%eax
+	EXIT
+
+.align 4
+.globl __put_user_4
+__put_user_4:
+	ENTER
+	movl TI_addr_limit(%ebx),%ebx
+	subl $3,%ebx
+	cmpl %ebx,%ecx
+	jae bad_put_user
+3:	movl %eax,(%ecx)
+	xorl %eax,%eax
+	EXIT
+
+.align 4
+.globl __put_user_8
+__put_user_8:
+	ENTER
+	movl TI_addr_limit(%ebx),%ebx
+	subl $7,%ebx
+	cmpl %ebx,%ecx
+	jae bad_put_user
+4:	movl %eax,(%ecx)
+5:	movl %edx,4(%ecx)
+	xorl %eax,%eax
+	EXIT
+
+bad_put_user:
+	movl $-14,%eax
+	EXIT
+
+.section __ex_table,"a"
+	.long 1b,bad_put_user
+	.long 2b,bad_put_user
+	.long 3b,bad_put_user
+	.long 4b,bad_put_user
+	.long 5b,bad_put_user
+.previous

arch/sparc64/kernel/pci_schizo.c

@@ -326,9 +326,9 @@ static int __init schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino)
 	return ret;
 }
 
-static unsigned int __init schizo_irq_build(struct pci_pbm_info *pbm,
-					    struct pci_dev *pdev,
-					    unsigned int ino)
+static unsigned int schizo_irq_build(struct pci_pbm_info *pbm,
+				     struct pci_dev *pdev,
+				     unsigned int ino)
 {
 	struct ino_bucket *bucket;
 	unsigned long imap, iclr;
@@ -382,19 +382,57 @@ static unsigned long stc_error_buf[128];
 static unsigned long stc_tag_buf[16];
 static unsigned long stc_line_buf[16];
 
-/* These offsets look weird because I keep in pbm->controller_regs
- * the second PROM register property minus 0x10000 which is the
- * base of the Safari and UPA64S registers of SCHIZO.
- */
-#define SCHIZO_PBM_A_REGS_OFF	(0x600000UL - 0x400000UL)
-#define SCHIZO_PBM_B_REGS_OFF	(0x700000UL - 0x400000UL)
+#define SCHIZO_UE_INO		0x30 /* Uncorrectable ECC error */
+#define SCHIZO_CE_INO		0x31 /* Correctable ECC error */
+#define SCHIZO_PCIERR_A_INO	0x32 /* PBM A PCI bus error */
+#define SCHIZO_PCIERR_B_INO	0x33 /* PBM B PCI bus error */
+#define SCHIZO_SERR_INO		0x34 /* Safari interface error */
+
+struct pci_pbm_info *pbm_for_ino(struct pci_controller_info *p, u32 ino)
+{
+	ino &= IMAP_INO;
+	if (p->pbm_A.ino_bitmap & (1UL << ino))
+		return &p->pbm_A;
+	if (p->pbm_B.ino_bitmap & (1UL << ino))
+		return &p->pbm_B;
+
+	printk("PCI%d: No ino_bitmap entry for ino[%x], bitmaps "
+	       "PBM_A[%016lx] PBM_B[%016lx]",
+	       p->index, ino,
+	       p->pbm_A.ino_bitmap,
+	       p->pbm_B.ino_bitmap);
+	printk("PCI%d: Using PBM_A, report this problem immediately.\n",
+	       p->index);
+
+	return &p->pbm_A;
+}
 
-static void schizo_clear_other_err_intr(int irq)
+static void schizo_clear_other_err_intr(struct pci_controller_info *p, int irq)
 {
-	struct ino_bucket *bucket = __bucket(irq);
-	unsigned long iclr = bucket->iclr;
+	struct pci_pbm_info *pbm;
+	struct ino_bucket *bucket;
+	unsigned long iclr;
+
+	/* Do not clear the interrupt for the other PCI bus.
+	 *
+	 * This "ACK both PBM IRQs" only needs to be performed
+	 * for chip-wide error interrupts.
+	 */
+	if ((irq & IMAP_INO) == SCHIZO_PCIERR_A_INO ||
+	    (irq & IMAP_INO) == SCHIZO_PCIERR_B_INO)
+		return;
+
+	pbm = pbm_for_ino(p, irq);
+	if (pbm == &p->pbm_A)
+		pbm = &p->pbm_B;
+	else
+		pbm = &p->pbm_A;
+
+	irq = schizo_irq_build(pbm, NULL,
+			       (pbm->portid << 6) | (irq & IMAP_INO));
+	bucket = __bucket(irq);
+	iclr = bucket->iclr;
 
-	iclr += (SCHIZO_PBM_B_REGS_OFF - SCHIZO_PBM_A_REGS_OFF);
 	upa_writel(ICLR_IDLE, iclr);
 }
 
@@ -728,7 +766,7 @@ static irqreturn_t schizo_ue_intr(int irq, void *dev_id, struct pt_regs *regs)
 	/* Interrogate IOMMU for error status. */
 	schizo_check_iommu_error(p, UE_ERR);
 
-	schizo_clear_other_err_intr(irq);
+	schizo_clear_other_err_intr(p, irq);
 
 	return IRQ_HANDLED;
 }
@@ -819,7 +857,7 @@ static irqreturn_t schizo_ce_intr(int irq, void *dev_id, struct pt_regs *regs)
 		printk("(none)");
 	printk("]\n");
 
-	schizo_clear_other_err_intr(irq);
+	schizo_clear_other_err_intr(p, irq);
 
 	return IRQ_HANDLED;
 }
@@ -856,9 +894,9 @@ static irqreturn_t schizo_ce_intr(int irq, void *dev_id, struct pt_regs *regs)
 #define SCHIZO_PCICTRL_SBH_ERR	(1UL << 35UL) /* Safari */
 #define SCHIZO_PCICTRL_SERR	(1UL << 34UL) /* Safari/Tomatillo */
 #define SCHIZO_PCICTRL_PCISPD	(1UL << 33UL) /* Safari */
-#define SCHIZO_PCICTRL_MRM_PREF	(1UL << 28UL) /* Tomatillo */
-#define SCHIZO_PCICTRL_RDO_PREF	(1UL << 27UL) /* Tomatillo */
-#define SCHIZO_PCICTRL_RDL_PREF	(1UL << 26UL) /* Tomatillo */
+#define SCHIZO_PCICTRL_MRM_PREF	(1UL << 30UL) /* Tomatillo */
+#define SCHIZO_PCICTRL_RDO_PREF	(1UL << 29UL) /* Tomatillo */
+#define SCHIZO_PCICTRL_RDL_PREF	(1UL << 28UL) /* Tomatillo */
 #define SCHIZO_PCICTRL_PTO	(3UL << 24UL) /* Safari/Tomatillo */
 #define SCHIZO_PCICTRL_PTO_SHIFT 24UL
 #define SCHIZO_PCICTRL_TRWSW	(7UL << 21UL) /* Tomatillo */
@@ -1040,7 +1078,7 @@ static irqreturn_t schizo_pcierr_intr(int irq, void *dev_id, struct pt_regs *reg
 	if (error_bits & (SCHIZO_PCIAFSR_PPERR | SCHIZO_PCIAFSR_SPERR))
 		pci_scan_for_parity_error(p, pbm, pbm->pci_bus);
 
-	schizo_clear_other_err_intr(irq);
+	schizo_clear_other_err_intr(p, irq);
 
 	return IRQ_HANDLED;
 }
@@ -1097,7 +1135,7 @@ static irqreturn_t schizo_safarierr_intr(int irq, void *dev_id, struct pt_regs *
 		printk("PCI%d: Unexpected Safari/JBUS error interrupt, errlog[%016lx]\n",
 		       p->index, errlog);
 
-		schizo_clear_other_err_intr(irq);
+		schizo_clear_other_err_intr(p, irq);
 		return IRQ_HANDLED;
 	}
 
@@ -1105,7 +1143,7 @@ static irqreturn_t schizo_safarierr_intr(int irq, void *dev_id, struct pt_regs *
 	       p->index);
 	schizo_check_iommu_error(p, SAFARI_ERR);
 
-	schizo_clear_other_err_intr(irq);
+	schizo_clear_other_err_intr(p, irq);
 	return IRQ_HANDLED;
 }
 
@@ -1120,26 +1158,6 @@ static irqreturn_t schizo_safarierr_intr(int irq, void *dev_id, struct pt_regs *
 #define SCHIZO_SAFARI_IRQCTRL	0x10010UL
 #define  SCHIZO_SAFIRQCTRL_EN	 0x8000000000000000UL
 
-#define SCHIZO_UE_INO		0x30 /* Uncorrectable ECC error */
-#define SCHIZO_CE_INO		0x31 /* Correctable ECC error */
-#define SCHIZO_PCIERR_A_INO	0x32 /* PBM A PCI bus error */
-#define SCHIZO_PCIERR_B_INO	0x33 /* PBM B PCI bus error */
-#define SCHIZO_SERR_INO		0x34 /* Safari interface error */
-
-struct pci_pbm_info *pbm_for_ino(struct pci_controller_info *p, u32 ino)
-{
-	ino &= IMAP_INO;
-	if (p->pbm_A.ino_bitmap & (1UL << ino))
-		return &p->pbm_A;
-	if (p->pbm_B.ino_bitmap & (1UL << ino))
-		return &p->pbm_B;
-	prom_printf("TOMATILLO%d: No entry in ino bitmap for %d\n",
-		    p->index, ino);
-	prom_halt();
-	/* NOTREACHED */
-	return NULL;
-}
-
 /* How the Tomatillo IRQs are routed around is pure guesswork here.
  *
  * All the Tomatillo devices I see in prtconf dumps seem to have only
@@ -1887,7 +1905,7 @@ static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 
 	tmp &= ~SCHIZO_PCICTRL_PTO;
 	if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO &&
-	    pbm->chip_version == 0x2)
+	    pbm->chip_version >= 0x2)
 		tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT;
 	else
 		tmp |= 0x1UL << SCHIZO_PCICTRL_PTO_SHIFT;
@@ -1895,8 +1913,16 @@ static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 	if (!prom_getbool(pbm->prom_node, "no-bus-parking"))
 		tmp |= SCHIZO_PCICTRL_PARK;
 
+	if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO &&
+	    pbm->chip_version <= 0x1)
+		tmp |= (1UL << 61);
+	else
+		tmp &= ~(1UL << 61);
+
 	if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO)
-		tmp |= SCHIZO_PCICTRL_MRM_PREF;
+		tmp |= (SCHIZO_PCICTRL_MRM_PREF |
+			SCHIZO_PCICTRL_RDO_PREF |
+			SCHIZO_PCICTRL_RDL_PREF);
 
 	schizo_write(pbm->pbm_regs + SCHIZO_PCI_CTRL, tmp);
 

drivers/net/tg3.c

@@ -60,8 +60,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.23"
-#define DRV_MODULE_RELDATE	"February 15, 2005"
+#define DRV_MODULE_VERSION	"3.24"
+#define DRV_MODULE_RELDATE	"March 4, 2005"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -3697,8 +3697,9 @@ static void tg3_nvram_unlock(struct tg3 *tp)
 /* tp->lock is held. */
 static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
 {
-	tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
-		      NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
+	if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
+		tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
+			      NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
 
 	if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
 		switch (kind) {
@@ -3902,19 +3903,20 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tw32_f(MAC_MODE, 0);
 	udelay(40);
 
-	/* Wait for firmware initialization to complete. */
-	for (i = 0; i < 100000; i++) {
-		tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
-		if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
-			break;
-		udelay(10);
-	}
-	if (i >= 100000 &&
-	    !(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
-		printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, "
-		       "firmware will not restart magic=%08x\n",
-		       tp->dev->name, val);
-		return -ENODEV;
+	if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
+		/* Wait for firmware initialization to complete. */
+		for (i = 0; i < 100000; i++) {
+			tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
+			if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
+				break;
+			udelay(10);
+		}
+		if (i >= 100000) {
+			printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, "
+			       "firmware will not restart magic=%08x\n",
+			       tp->dev->name, val);
+			return -ENODEV;
+		}
 	}
 
 	if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&

include/asm-i386/uaccess.h

@@ -185,6 +185,21 @@ extern void __get_user_4(void);
 
 extern void __put_user_bad(void);
 
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax, no clobbers.
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#define __put_user_1(x, ptr) __asm__ __volatile__("call __put_user_1":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_2(x, ptr) __asm__ __volatile__("call __put_user_2":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_4(x, ptr) __asm__ __volatile__("call __put_user_4":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_8(x, ptr) __asm__ __volatile__("call __put_user_8":"=a" (__ret_pu):"A" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_X(x, ptr) __asm__ __volatile__("call __put_user_X":"=a" (__ret_pu):"c" (ptr))
+
 /**
  * put_user: - Write a simple value into user space.
  * @x:   Value to copy to user space.
@@ -201,9 +216,18 @@ extern void __put_user_bad(void);
  *
  * Returns zero on success, or -EFAULT on error.
  */
-#define put_user(x,ptr)							\
-  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
+#define put_user(x,ptr)						\
+({	int __ret_pu;						\
+	__chk_user_ptr(ptr);					\
+	switch(sizeof(*(ptr))) {				\
+	case 1: __put_user_1(x, ptr); break;			\
+	case 2: __put_user_2(x, ptr); break;			\
+	case 4: __put_user_4(x, ptr); break;			\
+	case 8: __put_user_8(x, ptr); break;			\
+	default:__put_user_X(x, ptr); break;			\
+	}							\
+	__ret_pu;						\
+})
 
 /**
  * __get_user: - Get a simple variable from user space, with less checking.
@@ -259,16 +283,6 @@ extern void __put_user_bad(void);
 })
 
 
-#define __put_user_check(x,ptr,size)					\
-({									\
-	long __pu_err = -EFAULT;					\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
-	might_sleep();						\
-	if (access_ok(VERIFY_WRITE,__pu_addr,size))			\
-		__put_user_size((x),__pu_addr,(size),__pu_err,-EFAULT);	\
-	__pu_err;							\
-})							
-
 #define __put_user_u64(x, addr, err)				\
 	__asm__ __volatile__(					\
 		"1:	movl %%eax,0(%2)\n"			\