Commit 61fa9dcf authored by Anton Vorontsov's avatar Anton Vorontsov Committed by David S. Miller

ucc_geth: Fix oops when using fixed-link support

commit b1c4a9dd ("ucc_geth: Change
uec phy id to the same format as gianfar's") introduced a regression
in the ucc_geth driver that causes this oops when fixed-link is used:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0151270
Oops: Kernel access of bad area, sig: 11 [#1]
TMCUTU
NIP: c0151270 LR: c0151270 CTR: c0017760
REGS: cf81fa60 TRAP: 0300   Not tainted  (2.6.29-rc8)
MSR: 00009032 <EE,ME,IR,DR>  CR: 24024042  XER: 20000000
DAR: 00000000, DSISR: 20000000
TASK = cf81cba0[1] 'swapper' THREAD: cf81e000
GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80
cf86b08c
GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000
0ffc81a0
GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c
cf83f000
GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80
cf83f360
NIP [c0151270] ucc_geth_open+0x330/0x1efc
LR [c0151270] ucc_geth_open+0x330/0x1efc
Call Trace:
[cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable)
[cf81fba0] [c0187638] dev_open+0xbc/0x12c
[cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0

This patch fixes the issue by removing offending (and somewhat
duplicate) code from init_phy() routine, and changes _probe()
function to use uec_mdio_bus_name().

Also, since we fully construct phy_bus_id in the _probe() routine,
we no longer need ->phy_address and ->mdio_bus fields in
ucc_geth_info structure.

I wish the patch would be a bit shorter, but it seems like the only
way to fix the issue in a sane way. Luckily, the patch has been
tested with real PHYs and fixed-link, so no further regressions
expected.
Reported-by: default avatarJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: default avatarJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e3162d38
......@@ -1536,32 +1536,15 @@ static void adjust_link(struct net_device *dev)
static int init_phy(struct net_device *dev)
{
struct ucc_geth_private *priv = netdev_priv(dev);
struct device_node *np = priv->node;
struct device_node *phy, *mdio;
const phandle *ph;
char bus_name[MII_BUS_ID_SIZE];
const unsigned int *id;
struct ucc_geth_info *ug_info = priv->ug_info;
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
mdio = of_get_parent(phy);
id = of_get_property(phy, "reg", NULL);
of_node_put(phy);
of_node_put(mdio);
uec_mdio_bus_name(bus_name, mdio);
snprintf(phy_id, sizeof(phy_id), "%s:%02x",
bus_name, *id);
phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
priv->phy_interface);
if (IS_ERR(phydev)) {
printk("%s: Could not attach to PHY\n", dev->name);
......@@ -3629,10 +3612,12 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
fixed_link = of_get_property(np, "fixed-link", NULL);
if (fixed_link) {
snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
ug_info->phy_address = fixed_link[0];
snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
PHY_ID_FMT, "0", fixed_link[0]);
phy = NULL;
} else {
char bus_name[MII_BUS_ID_SIZE];
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
......@@ -3643,7 +3628,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
prop = of_get_property(phy, "reg", NULL);
if (prop == NULL)
return -1;
ug_info->phy_address = *prop;
/* Set the bus id */
mdio = of_get_parent(phy);
......@@ -3657,7 +3641,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
if (err)
return -1;
snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x", res.start);
uec_mdio_bus_name(bus_name, mdio);
snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
"%s:%02x", bus_name, *prop);
}
/* get the phy interface type, or default to MII */
......
......@@ -1091,8 +1091,7 @@ struct ucc_geth_info {
u32 eventRegMask;
u16 pausePeriod;
u16 extensionField;
u8 phy_address;
char mdio_bus[MII_BUS_ID_SIZE];
char phy_bus_id[BUS_ID_SIZE];
u8 weightfactor[NUM_TX_QUEUES];
u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment