Commit 62194244 authored by Jingoo Han's avatar Jingoo Han Committed by Kukjin Kim

USB: Add Samsung Exynos OHCI diver

This patch adds USB OHCI driver for Samsung EXYNOS SoCs.
Signed-off-by: default avatarJingoo Han <jg1.han@samsung.com>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 744f20f2
......@@ -48,6 +48,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_DAVINCI_DA8XX
default y if ARCH_CNS3XXX
default y if PLAT_SPEAR
default y if ARCH_EXYNOS
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
......
......@@ -371,6 +371,12 @@ config USB_OHCI_SH
Enables support for the on-chip OHCI controller on the SuperH.
If you use the PCI OHCI controller, this option is not necessary.
config USB_OHCI_EXYNOS
boolean "OHCI support for Samsung EXYNOS SoC Series"
depends on USB_OHCI_HCD && ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
config USB_CNS3XXX_OHCI
bool "Cavium CNS3XXX OHCI Module"
depends on USB_OHCI_HCD && ARCH_CNS3XXX
......
/*
* SAMSUNG EXYNOS USB HOST OHCI Controller
*
* Copyright (C) 2011 Samsung Electronics Co.Ltd
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <mach/ohci.h>
#include <plat/usb-phy.h>
struct exynos_ohci_hcd {
struct device *dev;
struct usb_hcd *hcd;
struct clk *clk;
};
static int ohci_exynos_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
ret = ohci_init(ohci);
if (ret < 0)
return ret;
ret = ohci_run(ohci);
if (ret < 0) {
err("can't start %s", hcd->self.bus_name);
ohci_stop(hcd);
return ret;
}
return 0;
}
static const struct hc_driver exynos_ohci_hc_driver = {
.description = hcd_name,
.product_desc = "EXYNOS OHCI Host Controller",
.hcd_priv_size = sizeof(struct ohci_hcd),
.irq = ohci_irq,
.flags = HCD_MEMORY|HCD_USB11,
.start = ohci_exynos_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
.get_frame_number = ohci_get_frame,
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
static int __devinit exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata;
struct exynos_ohci_hcd *exynos_ohci;
struct usb_hcd *hcd;
struct ohci_hcd *ohci;
struct resource *res;
int irq;
int err;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "No platform data defined\n");
return -EINVAL;
}
exynos_ohci = kzalloc(sizeof(struct exynos_ohci_hcd), GFP_KERNEL);
if (!exynos_ohci)
return -ENOMEM;
exynos_ohci->dev = &pdev->dev;
hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
err = -ENOMEM;
goto fail_hcd;
}
exynos_ohci->hcd = hcd;
exynos_ohci->clk = clk_get(&pdev->dev, "usbhost");
if (IS_ERR(exynos_ohci->clk)) {
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
err = PTR_ERR(exynos_ohci->clk);
goto fail_clk;
}
err = clk_enable(exynos_ohci->clk);
if (err)
goto fail_clken;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get I/O memory\n");
err = -ENXIO;
goto fail_io;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(res->start, resource_size(res));
if (!hcd->regs) {
dev_err(&pdev->dev, "Failed to remap I/O memory\n");
err = -ENOMEM;
goto fail_io;
}
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "Failed to get IRQ\n");
err = -ENODEV;
goto fail;
}
if (pdata->phy_init)
pdata->phy_init(pdev, S5P_USB_PHY_HOST);
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");
goto fail;
}
platform_set_drvdata(pdev, exynos_ohci);
return 0;
fail:
iounmap(hcd->regs);
fail_io:
clk_disable(exynos_ohci->clk);
fail_clken:
clk_put(exynos_ohci->clk);
fail_clk:
usb_put_hcd(hcd);
fail_hcd:
kfree(exynos_ohci);
return err;
}
static int __devexit exynos_ohci_remove(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = exynos_ohci->hcd;
usb_remove_hcd(hcd);
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
iounmap(hcd->regs);
clk_disable(exynos_ohci->clk);
clk_put(exynos_ohci->clk);
usb_put_hcd(hcd);
kfree(exynos_ohci);
return 0;
}
static void exynos_ohci_shutdown(struct platform_device *pdev)
{
struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = exynos_ohci->hcd;
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
#ifdef CONFIG_PM
static int exynos_ohci_suspend(struct device *dev)
{
struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
struct usb_hcd *hcd = exynos_ohci->hcd;
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct platform_device *pdev = to_platform_device(dev);
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
unsigned long flags;
int rc = 0;
/*
* Root hub was already suspended. Disable irq emission and
* mark HW unaccessible, bail out if RH has been resumed. Use
* the spinlock to properly synchronize with possible pending
* RH suspend or resume activity.
*
* This is still racy as hcd->state is manipulated outside of
* any locks =P But that will be a different fix.
*/
spin_lock_irqsave(&ohci->lock, flags);
if (hcd->state != HC_STATE_SUSPENDED && hcd->state != HC_STATE_HALT) {
rc = -EINVAL;
goto fail;
}
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
fail:
spin_unlock_irqrestore(&ohci->lock, flags);
return rc;
}
static int exynos_ohci_resume(struct device *dev)
{
struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
struct usb_hcd *hcd = exynos_ohci->hcd;
struct platform_device *pdev = to_platform_device(dev);
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
if (pdata && pdata->phy_init)
pdata->phy_init(pdev, S5P_USB_PHY_HOST);
/* Mark hardware accessible again as we are out of D3 state by now */
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
ohci_finish_controller_resume(hcd);
return 0;
}
#else
#define exynos_ohci_suspend NULL
#define exynos_ohci_resume NULL
#endif
static const struct dev_pm_ops exynos_ohci_pm_ops = {
.suspend = exynos_ohci_suspend,
.resume = exynos_ohci_resume,
};
static struct platform_driver exynos_ohci_driver = {
.probe = exynos_ohci_probe,
.remove = __devexit_p(exynos_ohci_remove),
.shutdown = exynos_ohci_shutdown,
.driver = {
.name = "exynos-ohci",
.owner = THIS_MODULE,
.pm = &exynos_ohci_pm_ops,
}
};
MODULE_ALIAS("platform:exynos-ohci");
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
......@@ -1005,6 +1005,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver
#endif
#ifdef CONFIG_USB_OHCI_EXYNOS
#include "ohci-exynos.c"
#define PLATFORM_DRIVER exynos_ohci_driver
#endif
#ifdef CONFIG_USB_OHCI_HCD_OMAP1
#include "ohci-omap.c"
#define OMAP1_PLATFORM_DRIVER ohci_hcd_omap_driver
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment