drm/amd/display: move wm ranges reporting to end of init hw

[Why]
SMU does not keep the wm table across S3, S4, need to re-send
the table. Also defer sending the cable to after DCN bave initialized

[How]
Send table at end of init hw
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c

@@ -396,12 +396,87 @@ void rn_init_clocks(struct clk_mgr *clk_mgr)
 	clk_mgr->clks.pwr_state = DCN_PWR_STATE_UNKNOWN;
 }
 
+void build_watermark_ranges(struct clk_bw_params *bw_params, struct pp_smu_wm_range_sets *ranges)
+{
+	int i, num_valid_sets;
+
+	num_valid_sets = 0;
+
+	for (i = 0; i < WM_SET_COUNT; i++) {
+		/* skip empty entries, the smu array has no holes*/
+		if (!bw_params->wm_table.entries[i].valid)
+			continue;
+
+		ranges->reader_wm_sets[num_valid_sets].wm_inst = bw_params->wm_table.entries[i].wm_inst;
+		ranges->reader_wm_sets[num_valid_sets].wm_type = bw_params->wm_table.entries[i].wm_type;;
+		/* We will not select WM based on dcfclk, so leave it as unconstrained */
+		ranges->reader_wm_sets[num_valid_sets].min_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
+		ranges->reader_wm_sets[num_valid_sets].max_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
+		/* fclk wil be used to select WM*/
+
+		if (ranges->reader_wm_sets[num_valid_sets].wm_type == WM_TYPE_PSTATE_CHG) {
+			if (i == 0)
+				ranges->reader_wm_sets[num_valid_sets].min_fill_clk_mhz = 0;
+			else {
+				/* add 1 to make it non-overlapping with next lvl */
+				ranges->reader_wm_sets[num_valid_sets].min_fill_clk_mhz = bw_params->clk_table.entries[i - 1].fclk_mhz + 1;
+			}
+			ranges->reader_wm_sets[num_valid_sets].max_fill_clk_mhz = bw_params->clk_table.entries[i].fclk_mhz;
+
+		} else {
+			/* unconstrained for memory retraining */
+			ranges->reader_wm_sets[num_valid_sets].min_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
+			ranges->reader_wm_sets[num_valid_sets].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
+
+			/* Modify previous watermark range to cover up to max */
+			ranges->reader_wm_sets[num_valid_sets - 1].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
+		}
+		num_valid_sets++;
+	}
+
+	ASSERT(num_valid_sets != 0); /* Must have at least one set of valid watermarks */
+	ranges->num_reader_wm_sets = num_valid_sets;
+
+	/* modify the min and max to make sure we cover the whole range*/
+	ranges->reader_wm_sets[0].min_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
+	ranges->reader_wm_sets[0].min_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
+	ranges->reader_wm_sets[ranges->num_reader_wm_sets - 1].max_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
+	ranges->reader_wm_sets[ranges->num_reader_wm_sets - 1].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
+
+	/* This is for writeback only, does not matter currently as no writeback support*/
+	ranges->num_writer_wm_sets = 1;
+	ranges->writer_wm_sets[0].wm_inst = WM_A;
+	ranges->writer_wm_sets[0].min_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
+	ranges->writer_wm_sets[0].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
+	ranges->writer_wm_sets[0].min_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
+	ranges->writer_wm_sets[0].max_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
+
+}
+
+static void rn_notify_wm_ranges(struct clk_mgr *clk_mgr_base)
+{
+	struct dc_debug_options *debug = &clk_mgr_base->ctx->dc->debug;
+	struct pp_smu_wm_range_sets ranges = {0};
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	struct pp_smu_funcs *pp_smu = clk_mgr->pp_smu;
+
+	if (!debug->disable_pplib_wm_range) {
+		build_watermark_ranges(clk_mgr_base->bw_params, &ranges);
+
+		/* Notify PP Lib/SMU which Watermarks to use for which clock ranges */
+		if (pp_smu && pp_smu->rn_funcs.set_wm_ranges)
+			pp_smu->rn_funcs.set_wm_ranges(&pp_smu->rn_funcs.pp_smu, &ranges);
+	}
+
+}
+
 static struct clk_mgr_funcs dcn21_funcs = {
 	.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
 	.update_clocks = rn_update_clocks,
 	.init_clocks = rn_init_clocks,
 	.enable_pme_wa = rn_enable_pme_wa,
-	/* .dump_clk_registers = rn_dump_clk_registers */
+	/* .dump_clk_registers = rn_dump_clk_registers, */
+	.notify_wm_ranges = rn_notify_wm_ranges
 };
 
 struct clk_bw_params rn_bw_params = {
@@ -472,63 +547,6 @@ struct clk_bw_params rn_bw_params = {
 	}
 };
 
-static void rn_build_watermark_ranges(struct clk_bw_params *bw_params, struct pp_smu_wm_range_sets *ranges)
-{
-	int i, num_valid_sets;
-
-	num_valid_sets = 0;
-
-	for (i = 0; i < WM_SET_COUNT; i++) {
-		/* skip empty entries, the smu array has no holes*/
-		if (!bw_params->wm_table.entries[i].valid)
-			continue;
-
-		ranges->reader_wm_sets[num_valid_sets].wm_inst = bw_params->wm_table.entries[i].wm_inst;
-		ranges->reader_wm_sets[num_valid_sets].wm_type = bw_params->wm_table.entries[i].wm_type;;
-		/* We will not select WM based on dcfclk, so leave it as unconstrained */
-		ranges->reader_wm_sets[num_valid_sets].min_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
-		ranges->reader_wm_sets[num_valid_sets].max_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
-		/* fclk wil be used to select WM*/
-
-		if (ranges->reader_wm_sets[num_valid_sets].wm_type == WM_TYPE_PSTATE_CHG) {
-			if (i == 0)
-				ranges->reader_wm_sets[num_valid_sets].min_fill_clk_mhz = 0;
-			else {
-				/* add 1 to make it non-overlapping with next lvl */
-				ranges->reader_wm_sets[num_valid_sets].min_fill_clk_mhz = bw_params->clk_table.entries[i - 1].fclk_mhz + 1;
-			}
-			ranges->reader_wm_sets[num_valid_sets].max_fill_clk_mhz = bw_params->clk_table.entries[i].fclk_mhz;
-
-		} else {
-			/* unconstrained for memory retraining */
-			ranges->reader_wm_sets[num_valid_sets].min_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
-			ranges->reader_wm_sets[num_valid_sets].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
-
-			/* Modify previous watermark range to cover up to max */
-			ranges->reader_wm_sets[num_valid_sets - 1].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
-		}
-		num_valid_sets++;
-	}
-
-	ASSERT(num_valid_sets != 0); /* Must have at least one set of valid watermarks */
-	ranges->num_reader_wm_sets = num_valid_sets;
-
-	/* modify the min and max to make sure we cover the whole range*/
-	ranges->reader_wm_sets[0].min_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
-	ranges->reader_wm_sets[0].min_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
-	ranges->reader_wm_sets[ranges->num_reader_wm_sets - 1].max_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
-	ranges->reader_wm_sets[ranges->num_reader_wm_sets - 1].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
-
-	/* This is for writeback only, does not matter currently as no writeback support*/
-	ranges->num_writer_wm_sets = 1;
-	ranges->writer_wm_sets[0].wm_inst = WM_A;
-	ranges->writer_wm_sets[0].min_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
-	ranges->writer_wm_sets[0].max_fill_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
-	ranges->writer_wm_sets[0].min_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MIN;
-	ranges->writer_wm_sets[0].max_drain_clk_mhz = PP_SMU_WM_SET_RANGE_CLK_UNCONSTRAINED_MAX;
-
-}
-
 static unsigned int find_dcfclk_for_voltage(struct dpm_clocks *clock_table, unsigned int voltage)
 {
 	int i;
@@ -661,21 +679,6 @@ void rn_clk_mgr_construct(
 		rn_clk_mgr_helper_populate_bw_params(clk_mgr->base.bw_params, &clock_table, &ctx->asic_id);
 	}
 
-	/*
-	 * Notify SMU which set of WM should be selected for different ranges of fclk
-	 * On Renoir there is a maximumum of 4 DF pstates supported, could be less
-	 * depending on DDR speed and fused maximum fclk.
-	 */
-	if (!debug->disable_pplib_wm_range) {
-		struct pp_smu_wm_range_sets ranges = {0};
-
-		rn_build_watermark_ranges(clk_mgr->base.bw_params, &ranges);
-
-		/* Notify PP Lib/SMU which Watermarks to use for which clock ranges */
-		if (pp_smu && pp_smu->rn_funcs.set_wm_ranges)
-			pp_smu->rn_funcs.set_wm_ranges(&pp_smu->rn_funcs.pp_smu, &ranges);
-	}
-
 	if (!IS_FPGA_MAXIMUS_DC(ctx->dce_environment) && clk_mgr->smu_ver >= 0x00371500) {
 		/* enable powerfeatures when displaycount goes to 0 */
 		rn_vbios_smu_enable_48mhz_tmdp_refclk_pwrdwn(clk_mgr, !debug->disable_48mhz_pwrdwn);

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -1304,6 +1304,10 @@ static void dcn10_init_hw(struct dc *dc)
 	}
 
 	dc->hwss.enable_power_gating_plane(dc->hwseq, true);
+
+	if (dc->clk_mgr->funcs->notify_wm_ranges)
+		dc->clk_mgr->funcs->notify_wm_ranges(dc->clk_mgr);
+
 }
 
 static void dcn10_reset_hw_ctx_wrap(

drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h

@@ -183,6 +183,7 @@ struct clk_mgr_funcs {
 
 	bool (*are_clock_states_equal) (struct dc_clocks *a,
 			struct dc_clocks *b);
+	void (*notify_wm_ranges)(struct clk_mgr *clk_mgr);
 };
 
 struct clk_mgr {