Merge tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
  addresses a compilation error encountered during compile test on
  powerpc"

* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix block process call transactions
  i2c: pasemi: split driver into two separate modules
  i2c: qcom-geni: Correct I2C TRE sequence

drivers/i2c/busses/Makefile

@@ -90,10 +90,8 @@ obj-$(CONFIG_I2C_NPCM)		+= i2c-npcm7xx.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_OWL)		+= i2c-owl.o
-i2c-pasemi-objs := i2c-pasemi-core.o i2c-pasemi-pci.o
-obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
-i2c-apple-objs := i2c-pasemi-core.o i2c-pasemi-platform.o
-obj-$(CONFIG_I2C_APPLE)	+= i2c-apple.o
+obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi-core.o i2c-pasemi-pci.o
+obj-$(CONFIG_I2C_APPLE)		+= i2c-pasemi-core.o i2c-pasemi-platform.o
 obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o

drivers/i2c/busses/i2c-i801.c

@@ -498,11 +498,10 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
 	/* Set block buffer mode */
 	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
 
-	inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
-
 	if (read_write == I2C_SMBUS_WRITE) {
 		len = data->block[0];
 		outb_p(len, SMBHSTDAT0(priv));
+		inb_p(SMBHSTCNT(priv));	/* reset the data buffer index */
 		for (i = 0; i < len; i++)
 			outb_p(data->block[i+1], SMBBLKDAT(priv));
 	}
@@ -520,6 +519,7 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
 		}
 
 		data->block[0] = len;
+		inb_p(SMBHSTCNT(priv));	/* reset the data buffer index */
 		for (i = 0; i < len; i++)
 			data->block[i + 1] = inb_p(SMBBLKDAT(priv));
 	}

drivers/i2c/busses/i2c-pasemi-core.c

@@ -369,6 +369,7 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(pasemi_i2c_common_probe);
 
 irqreturn_t pasemi_irq_handler(int irq, void *dev_id)
 {
@@ -378,3 +379,8 @@ irqreturn_t pasemi_irq_handler(int irq, void *dev_id)
 	complete(&smbus->irq_completion);
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(pasemi_irq_handler);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
+MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver");

drivers/i2c/busses/i2c-qcom-geni.c

@@ -613,20 +613,20 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i
 
 		peripheral.addr = msgs[i].addr;
 
+		ret =  geni_i2c_gpi(gi2c, &msgs[i], &config,
+				    &tx_addr, &tx_buf, I2C_WRITE, gi2c->tx_c);
+		if (ret)
+			goto err;
+
 		if (msgs[i].flags & I2C_M_RD) {
 			ret =  geni_i2c_gpi(gi2c, &msgs[i], &config,
 					    &rx_addr, &rx_buf, I2C_READ, gi2c->rx_c);
 			if (ret)
 				goto err;
-		}
-
-		ret =  geni_i2c_gpi(gi2c, &msgs[i], &config,
-				    &tx_addr, &tx_buf, I2C_WRITE, gi2c->tx_c);
-		if (ret)
-			goto err;
 
-		if (msgs[i].flags & I2C_M_RD)
 			dma_async_issue_pending(gi2c->rx_c);
+		}
+
 		dma_async_issue_pending(gi2c->tx_c);
 
 		timeout = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);