MIPS: Loongson32: Remove DMA & NAND devices from ls1b/board.c

Commit 7b3415f5 ("MIPS: Loongson32: Remove unused platform devices")
removed the definitions of platform devices which have no in tree
drivers from common Loongson32 code, but missed their removal from
Loongson 1B board code in arch/mips/loongson32/ls1b/board.c. This causes
build failures due to the missing declarations of ls1x_dma_pdev,
ls1x_nand_pdev & their associated *_set_platdata functions.

Remove the dead code from arch/mips/loongson32/ls1b/board.c to fix the
build.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 7b3415f5 ("MIPS: Loongson32: Remove unused platform devices")

arch/mips/loongson32/ls1b/board.c

@@ -16,30 +16,6 @@
 #include <nand.h>
 #include <platform.h>
 
-struct plat_ls1x_dma ls1x_dma_pdata = {
-	.nr_channels	= 3,
-};
-
-static struct mtd_partition ls1x_nand_parts[] = {
-	{
-		.name        = "kernel",
-		.offset      = 0,
-		.size        = SZ_16M,
-	},
-	{
-		.name        = "rootfs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-struct plat_ls1x_nand ls1x_nand_pdata = {
-	.parts		= ls1x_nand_parts,
-	.nr_parts	= ARRAY_SIZE(ls1x_nand_parts),
-	.hold_cycle	= 0x2,
-	.wait_cycle	= 0xc,
-};
-
 static const struct gpio_led ls1x_gpio_leds[] __initconst = {
 	{
 		.name			= "LED9",
@@ -64,13 +40,11 @@ static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
 static struct platform_device *ls1b_platform_devices[] __initdata = {
 	&ls1x_uart_pdev,
 	&ls1x_cpufreq_pdev,
-	&ls1x_dma_pdev,
 	&ls1x_eth0_pdev,
 	&ls1x_eth1_pdev,
 	&ls1x_ehci_pdev,
 	&ls1x_gpio0_pdev,
 	&ls1x_gpio1_pdev,
-	&ls1x_nand_pdev,
 	&ls1x_rtc_pdev,
 	&ls1x_wdt_pdev,
 };
@@ -78,8 +52,6 @@ static struct platform_device *ls1b_platform_devices[] __initdata = {
 static int __init ls1b_platform_init(void)
 {
 	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-	ls1x_dma_set_platdata(&ls1x_dma_pdata);
-	ls1x_nand_set_platdata(&ls1x_nand_pdata);
 
 	gpio_led_register_device(-1, &ls1x_led_pdata);