Commit 62d0ff83 authored by Minghuan Lian's avatar Minghuan Lian Committed by Bjorn Helgaas

PCI: layerscape: Add Freescale Layerscape PCIe driver

Add support for Freescale Layerscape PCIe controller.  This driver re-uses
the Synopsis DesignWare core code.

[bhelgaas: add Kconfig dependency on CONFIG_ARM]
Signed-off-by: default avatarMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
parent f114040e
Freescale Layerscape PCIe controller
This PCIe host controller is based on the Synopsis Designware PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie"
- reg: base addresses and lengths of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
- interrupt-names: Must include the following entries:
"intr": The interrupt that is asserted for controller interrupts
- fsl,pcie-scfg: Must include two entries.
The first entry must be a link to the SCFG device node
The second entry must be '0' or '1' based on physical PCIe controller index.
This is used to get SCFG PEXN registers
Example:
pcie@3400000 {
compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
interrupt-names = "intr";
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000 /* prefetchable memory */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
};
......@@ -6983,6 +6983,16 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/xgene-pci.txt
F: drivers/pci/host/pci-xgene.c
PCI DRIVER FOR FREESCALE LAYERSCAPE
M: Minghuan Lian <minghuan.Lian@freescale.com>
M: Mingkai Hu <mingkai.hu@freescale.com>
M: Roy Zang <tie-fei.zang@freescale.com>
L: linuxppc-dev@lists.ozlabs.org
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: drivers/pci/host/*layerscape*
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
M: Lucas Stach <l.stach@pengutronix.de>
......
......@@ -91,4 +91,12 @@ config PCI_XGENE
There are 5 internal PCIe ports available. Each port is GEN3 capable
and have varied lanes from x1 to x8.
config PCI_LAYERSCAPE
bool "Freescale Layerscape PCIe controller"
depends on OF && ARM
select PCIE_DW
select MFD_SYSCON
help
Say Y here if you want PCIe controller support on Layerscape SoCs.
endmenu
......@@ -11,3 +11,4 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
/*
* PCIe host controller driver for Freescale Layerscape SoCs
*
* Copyright (C) 2014 Freescale Semiconductor.
*
* Author: Minghuan Lian <Minghuan.Lian@freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include "pcie-designware.h"
/* PEX1/2 Misc Ports Status Register */
#define SCFG_PEXMSCPORTSR(pex_idx) (0x94 + (pex_idx) * 4)
#define LTSSM_STATE_SHIFT 20
#define LTSSM_STATE_MASK 0x3f
#define LTSSM_PCIE_L0 0x11 /* L0 state */
/* Symbol Timer Register and Filter Mask Register 1 */
#define PCIE_STRFMR1 0x71c
struct ls_pcie {
struct list_head node;
struct device *dev;
struct pci_bus *bus;
void __iomem *dbi;
struct regmap *scfg;
struct pcie_port pp;
int index;
int msi_irq;
};
#define to_ls_pcie(x) container_of(x, struct ls_pcie, pp)
static int ls_pcie_link_up(struct pcie_port *pp)
{
u32 state;
struct ls_pcie *pcie = to_ls_pcie(pp);
regmap_read(pcie->scfg, SCFG_PEXMSCPORTSR(pcie->index), &state);
state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
if (state < LTSSM_PCIE_L0)
return 0;
return 1;
}
static void ls_pcie_host_init(struct pcie_port *pp)
{
struct ls_pcie *pcie = to_ls_pcie(pp);
int count = 0;
u32 val;
dw_pcie_setup_rc(pp);
while (!ls_pcie_link_up(pp)) {
usleep_range(100, 1000);
count++;
if (count >= 200) {
dev_err(pp->dev, "phy link never came up\n");
return;
}
}
/*
* LS1021A Workaround for internal TKT228622
* to fix the INTx hang issue
*/
val = ioread32(pcie->dbi + PCIE_STRFMR1);
val &= 0xffff;
iowrite32(val, pcie->dbi + PCIE_STRFMR1);
}
static struct pcie_host_ops ls_pcie_host_ops = {
.link_up = ls_pcie_link_up,
.host_init = ls_pcie_host_init,
};
static int ls_add_pcie_port(struct ls_pcie *pcie)
{
struct pcie_port *pp;
int ret;
pp = &pcie->pp;
pp->dev = pcie->dev;
pp->dbi_base = pcie->dbi;
pp->root_bus_nr = -1;
pp->ops = &ls_pcie_host_ops;
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(pp->dev, "failed to initialize host\n");
return ret;
}
return 0;
}
static int __init ls_pcie_probe(struct platform_device *pdev)
{
struct ls_pcie *pcie;
struct resource *dbi_base;
u32 index[2];
int ret;
pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
return -ENOMEM;
pcie->dev = &pdev->dev;
dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
if (!dbi_base) {
dev_err(&pdev->dev, "missing *regs* space\n");
return -ENODEV;
}
pcie->dbi = devm_ioremap_resource(&pdev->dev, dbi_base);
if (IS_ERR(pcie->dbi))
return PTR_ERR(pcie->dbi);
pcie->scfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"fsl,pcie-scfg");
if (IS_ERR(pcie->scfg)) {
dev_err(&pdev->dev, "No syscfg phandle specified\n");
return PTR_ERR(pcie->scfg);
}
ret = of_property_read_u32_array(pdev->dev.of_node,
"fsl,pcie-scfg", index, 2);
if (ret)
return ret;
pcie->index = index[1];
ret = ls_add_pcie_port(pcie);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, pcie);
return 0;
}
static const struct of_device_id ls_pcie_of_match[] = {
{ .compatible = "fsl,ls1021a-pcie" },
{ },
};
MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
static struct platform_driver ls_pcie_driver = {
.driver = {
.name = "layerscape-pcie",
.owner = THIS_MODULE,
.of_match_table = ls_pcie_of_match,
},
};
module_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
MODULE_AUTHOR("Minghuan Lian <Minghuan.Lian@freescale.com>");
MODULE_DESCRIPTION("Freescale Layerscape PCIe host controller driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment