arm64: dts: qcom: msm8916: Use more generic node names

Now that all MSM8916 boards are referencing nodes by label instead
of name, we can easily make some more nodes use more generic names
(as recommended in the device tree specification or the binding
documentation).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-10-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi

@@ -81,7 +81,7 @@ i2c-muic {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		muic: sm5502@25 {
+		muic: extcon@25 {
 			compatible = "siliconmitus,sm5502-muic";
 
 			reg = <0x25>;

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -714,7 +714,7 @@ sound: sound@7702000 {
 			reg-names = "mic-iomux", "spkr-iomux";
 		};
 
-		lpass: lpass@7708000 {
+		lpass: audio-controller@7708000 {
 			status = "disabled";
 			compatible = "qcom,lpass-cpu-apq8016";
 			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
@@ -743,7 +743,7 @@ lpass: lpass@7708000 {
 			#size-cells = <0>;
 		};
 
-		lpass_codec: codec@771c000 {
+		lpass_codec: audio-codec@771c000 {
 			compatible = "qcom,msm8916-wcd-digital-codec";
 			reg = <0x0771c000 0x400>;
 			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
@@ -1161,7 +1161,7 @@ dsi_phy0: dsi-phy@1a98300 {
 			};
 		};
 
-		mpss: hexagon@4080000 {
+		mpss: remoteproc@4080000 {
 			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
 			reg = <0x04080000 0x100>,
 			      <0x04020000 0x040>;
@@ -1225,7 +1225,7 @@ cb@1 {
 			};
 		};
 
-		pronto: wcnss@a21b000 {
+		pronto: remoteproc@a21b000 {
 			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
 			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
 			reg-names = "ccu", "dxe", "pmu";
@@ -1821,7 +1821,7 @@ rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8916";
 				qcom,smd-channels = "rpm_requests";
 
-				rpmcc: qcom,rpmcc {
+				rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-msm8916";
 					#clock-cells = <1>;
 				};

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -6,7 +6,7 @@
 
 &spmi_bus {
 
-	pm8916_0: pm8916@0 {
+	pm8916_0: pmic@0 {
 		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
@@ -79,7 +79,7 @@ pm8916_temp: temp-alarm@2400 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm8916_vadc: vadc@3100 {
+		pm8916_vadc: adc@3100 {
 			compatible = "qcom,spmi-vadc";
 			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -87,33 +87,33 @@ pm8916_vadc: vadc@3100 {
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			usb_in {
+			adc-chan@0 {
 				reg = <VADC_USBIN>;
 				qcom,pre-scaling = <1 10>;
 			};
-			vph_pwr {
+			adc-chan@7 {
 				reg = <VADC_VSYS>;
 				qcom,pre-scaling = <1 3>;
 			};
-			die_temp {
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_gnd {
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
 		};
 	};
 
-	pm8916_1: pm8916@1 {
+	pm8916_1: pmic@1 {
 		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
@@ -125,7 +125,7 @@ pm8916_vib: vibrator@c000 {
 			status = "disabled";
 		};
 
-		wcd_codec: codec@f000 {
+		wcd_codec: audio-codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
 			reg = <0xf000>;
 			reg-names = "pmic-codec-core";